Commit Graph

130 Commits

Author SHA1 Message Date
Russell King
a177ba3b7a Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', 'omap-reviewed', 'rpc', 'rtc' and 's3c' into devel 2008-07-10 16:38:50 +01:00
Paul Walmsley
88b8ba9057 ARM: OMAP2: Clock: New OMAP2/3 DPLL rate rounding algorithm
This patch adds a new rate rounding algorithm for DPLL clocks on the
OMAP2/3 architecture.

For a desired DPLL target rate, there may be several
multiplier/divider (M, N) values which will generate a sufficiently
close rate.  Lower N values result in greater power economy.  However,
lower N values can cause the difference between the rounded rate and
the target rate ("rate error") to be larger than it would be with a
higher N.  This can cause downstream devices to run more slowly than
they otherwise would.

This DPLL rate rounding algorithm:

- attempts to find the lowest possible N (DPLL divider) to reach the
  target_rate (since, according to Richard Woodruff <r-woodruff@ti.com>,
  lower N values save more power than higher N values).

- allows developers to set an upper bound on the error between the
  rounded rate and the desired target rate ("rate tolerance"), so an
  appropriate balance between rate fidelity and power savings can be
  set.  This maximum rate error tolerance is set via
  omap2_set_dpll_rate_tolerance().

- never returns a rounded rate higher than the target rate.

The rate rounding algorithm caches the last rounded M, N, and rate
computation to avoid rounding the rate twice for each clk_set_rate()
call.  (This patch does not yet implement set_rate for DPLLs; that
follows in a future patch.)

The algorithm trades execution speed for rate accuracy.  It will find
the (M, N) set that results in the least rate error, within a
specified rate tolerance.  It does this by evaluating each divider
setting - on OMAP3, this involves 128 steps.  Another approach to DPLL
rate rounding would be to bail out as soon as a valid rate is found
within the rate tolerance, which would trade rate accuracy for
execution speed.  Alternate implementations welcome.

This code is not yet used by the OMAP24XX DPLL clock, since it
is currently defined as a composite clock, fusing the DPLL M,N and the
M2 output divider.  This patch also renames the existing OMAP24xx DPLL
programming functions to highlight that they program both the DPLL and
the DPLL's output multiplier.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:46 +03:00
Paul Walmsley
542313cc98 ARM: OMAP2: Clock: Add OMAP3 DPLL autoidle functions
This patch adds support for DPLL autoidle control to the OMAP3 clock
framework.  These functions will be used by the noncore DPLL enable
and disable code - this is because, according to the CDP code, the
DPLL autoidle status must be saved and restored across DPLL
lock/bypass/off transitions.

N.B.: the CORE DPLL (DPLL3) has three autoidle mode options, rather
than just two.  This code currently does not support the third option,
low-power bypass autoidle.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:45 +03:00
Paul Walmsley
097c584cd4 ARM: OMAP: Add OMAP chip type structure; clean up mach-omap2/id.c
Add a new OMAP chip identification interface, omap_chip_id.
omap_chip_id is a structure which contains one bit for each OMAP2/3
CPU type, and on 3430, ES level.  For example, the CHIP_IS_OMAP2420
bit is set in omap_chip at boot on an OMAP2420.  On OMAP3430ES2, both
CHIP_IS_OMAP3430 and CHIP_IS_OMAP3430ES2 bits are set.

omap_chip is set in mach-omap2/id.c by _set_omap_chip(). Other
code should use the omap_chip_is() function to test against omap_chip.

Also, clean up id.c by splitting some code out of
omap_check_revision() into its own function, _set_system_rev(); and
converting some debug printk()s into pr_debug().

Second revision.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:45 +03:00
Tony Lindgren
ff00fcc9ca ARM: OMAP: Turn CM and PRM access into functions
Otherwise compiling in omap2 and omap3 will not work.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:44 +03:00
Tony Lindgren
a58caad113 ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
New struct omap_globals contains the omap processor specific
module bases. Use omap_globals to set the various base addresses
to make detecting omap chip type simpler.

Also introduce OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS for future multi-omap
patches.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:44 +03:00
Eduardo Valentin
78673bc898 ARM: OMAP: McBSP: Add support for mcbsp on mach-omap2
This patch adds support for mach-omap2 based on current
mcbsp platform driver.

Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:40 +03:00
Eduardo Valentin
44ec9a3371 ARM: OMAP: McBSP: Add support for mcbsp on mach-omap1
This patch adds support for mach-omap1 based on current
mcbsp platform driver.

Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:40 +03:00
Tony Lindgren
c2d43e39c7 ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.S
Split sram24xx.S into sram242x.S and sram243x.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:38 +03:00
Tony Lindgren
373a67021d ARM: OMAP: SRAM: Move omap2 sram-fn.S to sram242x.S
This file will get split between sram242x.S and sram243x.S
in following patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:38 +03:00
Richard Woodruff
3fddd09e59 ARM: OMAP: DMTimer: Optimize by adding load and start
This patch optimizes the timer load and start sequence.  By combining the
load and start a needless posted wait can be removed from the system timer
execution path.

* Before patch register writes are taking up .078% @ 500MHz during idle.

 Address                 |total  |min  |max      |avr     |count|ratio%
 old\process\default_idle|7.369s |0.0us|999.902ms|14.477ms|509. |62.661%
 ld\Global\cpu_v7_do_idle|4.265s |0.0us|375.786ms|24.374ms|175. |36.270%
                (UNKNOWN)|17.503ms|0.us|531.080us|5.119us|3419. |0.148%
 r\omap_dm_timer_set_load|8.135ms|0.0us|79.887us|15.065us|540.  |0.069% <--
 \vmlinux-old\Global\_end|2.023ms|0.0us|4.000us|0.560us|3613.   |0.017%
 -old\Global\__raw_readsw|1.962ms|0.0us|108.610us|9.167us|214.  |0.016%
 old\smc91x\smc_interrupt|1.353ms|0.0us|10.212us|2.348us|576.   |0.011%
 s/namei\__link_path_walk|1.161ms|0.0us|4.310us|0.762us|  1524. |0.009%
 \omap_dm_timer_write_reg|1.085ms|0.0us|126.150us|2.153us|504.  |0.009% <--

* After patch timer functions do not show up in top listings for long captures.

Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:30 +03:00
Thara Gopinath
15e02a3b51 ARM: OMAP: Correcting the gpmc prefetch control register address
Correcting the GPMC_PREFETCH_CONTROL register address

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-06-06 15:44:12 -07:00
Russell King
205bee6ad8 [ARM] dyntick: Remove obsolete and unused ARM dyntick support
dyntick is superseded by the clocksource/clockevent infrastructure,
using the NO_HZ configuration option.  No one implements dyntick on
ARM anymore, so it's pointless keeping it around.  Remove dyntick
support.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-12 17:39:14 +01:00
Kalle Jokiniemi
dfa3d039da ARM: OMAP: Fixed comments on global PRM register usage
Fixed comments on global PRM register usage.

Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-05-09 10:25:04 -07:00
Högander Jouni
d756f54e57 ARM: OMAP: Add PARENT_CONTROLS_CLOCK flag to dpll5_m2_ck
This patch removes following message on dpll5_m2_ck enable and
disable:

clock.c: Enable for dpll5_m2_ck without enable code
clock: clk_disable called on independent clock dpll5_m2_ck
which has no enable_reg

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-05-09 10:25:04 -07:00
Jouni Högander
1971a3900a ARM: OMAP: PRCM fixes to ssi clock handling
ssi_l4_ick should have PARENT_CONTROLS_CLOCK flag.
ST_SSI_STDBY bit in idlest register cannot be used in  omap2_clk_wait_ready

Signed-off-by: Jouni Högander <jouni.hogander@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-05-09 10:25:04 -07:00
Hiroshi DOYU
31c203d49c ARM: OMAP: Add fuctional clock enabler for iva2
Add fuctional clock enabler for iva2

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-05-09 10:25:03 -07:00
Jouni Högander
c3aa044aa3 ARM: OMAP: Fix 34xx to use correct shift values for gpio2-6 fclks
Wrong shift values were used for gpio2-6  fclks (gpt2-6 shift).

Signed-off-by: Jouni Högander <jouni.hogander@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-05-09 10:25:03 -07:00
Hiroshi DOYU
bfbdcf8a14 ARM: OMAP: Fix Unbalanced enable for IRQ in omap mailbox
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-05-09 10:25:03 -07:00
Paul Walmsley
c8d2eb8e56 ARM: OMAP: Add calls to omap2_set_globals_*()
Add the omap2_set_globals_{242x,243x,343x}() functions. These
functions are called early upon boot in the map_io() functions in the
board-specific init files.

This patch was accidentally left out of the earlier series.

This fixes omap2 booting as noted by Kyungmin Park <kmpark@infradead.org>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-05-09 10:25:02 -07:00
Roman Tereshonkov
3760d31f11 ARM: OMAP2: New DPLL clock framework
These changes is the result of the discussion with Paul Walmsley.
His ideas are included into this patch.

Remove DPLL output divider handling from DPLLs and CLKOUTX2 clocks,
and place it into specific DPLL output divider clocks (e.g., dpll3_m2_clk).
omap2_get_dpll_rate() now returns the correct DPLL rate, as represented
by the DPLL's CLKOUT output. Also add MPU and IVA2 subsystem clocks, along
with high-frequency bypass support.

Add support for DPLLs function in locked and bypass clock modes.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:39 -07:00
Paul Walmsley
02e19a960a ARM: OMAP2: Add 34xx clock code
This patch add 34xx clock code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:39 -07:00
Paul Walmsley
b045d08098 ARM: OMAP2: Add 34xx clocks
This patch defines 34xx clocks.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:39 -07:00
Paul Walmsley
d83b079f0f ARM: OMAP2: Remove old PRCM register access code
Remove old PRCM register access code that is no longer needed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:39 -07:00
Tony Lindgren
a16e97037b ARM: OMAP2: Clean up 24xx clock code
Clean up 24xx clock code to sync it with linux-omap tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:38 -07:00
Paul Walmsley
2150ef46f8 ARM: OMAP2: Remove old 24xx specific clock functions
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:38 -07:00
Paul Walmsley
e32744b02d ARM: OMAP: Add rest of 24xx clocks
This patch adds the rest of clocks for 24xx.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:38 -07:00
Paul Walmsley
6b8858a972 ARM: OMAP2: Change 24xx to use shared clock code and new reg access
This patch changes 24xx to use shared clock code and new register
access.

Note that patch adds some temporary OLD_CK defines to keep patch
more readable. These temporary defines will be removed in the next
patch. Also not all clocks are changed in this patch to limit the
size.

Also, the patch fixes few incorrect clock defines in clock24xx.h.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:38 -07:00
Paul Walmsley
543d93781a ARM: OMAP2: Add common clock framework for 24xx and 34xx
This patch adds a common clock framework for 24xx and 34xx.
Note that this patch does not add it to Makefile until in
next patch. Some functions are modified from earlier 24xx
clock framework code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:38 -07:00
Paul Walmsley
3d876e59c8 ARM: OMAP2: Move clock.c to clock24xx.c
This patch moves clock.h to clock24xx.c to make room for
adding common clock code for 24xx and 34xx.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:37 -07:00
Paul Walmsley
32ab2cb941 ARM: OMAP2: Move clock.h to clock24xx.h
This patch moves clock.h to clock24xx.h to make room for
adding common clock code for 24xx and 34xx.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:37 -07:00
Tony Lindgren
b81ad56b07 ARM: OMAP2: Remove old 24xx PM code
This patch removes old 24xx PM code that does not really work for sleep
states, and uses old power management register access. Working PM code
will be added later.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:37 -07:00
Paul Walmsley
445959821f ARM: OMAP2: Change 24xx to use new register access
This patch changes 24xx to use new register access, except for clock
framework. Clock framework register access will get updates in the
next patch.

Note that board-*.c files change GPMC (General Purpose Memory Controller)
access to use gpmc_cs_write_reg() instead of accessing the registers
directly. The code also uses gpmc_fck instead of it's parent clock
core_l3_ck for GPMC clock.

The H4 board file also adds h4_init_flash() function, which specify the
flash start and end addresses.

Also note that sleep.S removes some unused registers addresses.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:37 -07:00
Tony Lindgren
c595713da7 ARM: OMAP2: Add register access for 34xx
This patch adds register access for 34xx power and clock management.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:29:37 -07:00
Paul Walmsley
69d88a00a2 ARM: OMAP2: Add common register access for 24xx and 34xx
This patch adds common register access for 24xx and 34xx power
and clock management in order to share code between 24xx and 34xx.

Only change USB platform init code to use new register access, other
access will be changed in later patches.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 10:27:25 -07:00
Tony Lindgren
9330899e0f ARM: OMAP2: Clean-up mux code
Misc clean-up for the mux code and remove some unnecessary
ifdefs. Patch changes debug function so it can be used on
both 24xx and 34xx.

Changes are mostly for omap2, but patch also cleans up some
omap1 and common mux code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 09:57:13 -07:00
Tony Lindgren
f7337a199a ARM: OMAP2: Add new pin multiplexing configurations
Add new pin multiplexing configurations

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 09:57:13 -07:00
Kevin Hilman
5a3a388fbe ARM: OMAP: Timer32K: Re-organize duplicated 32k-timer code
On OMAP2/3, the gp-timer code can be used for a 32kHz timer simply by
setting the source to be the 32k clock instead of sys_clk.

This patch uses the mach-omap2/timer-gp.c code for 32kHz timer on
OMAP2, moving the logic into mach-omap2/timer-gp.c, and not using
plat-omap/timer32k.c which, for OMAP2, is redundant with the timer-gp
code.

Also, if CONFIG_OMAP_32K_TIMER is enabled, the gptimer-based
clocksource is not used.  Instead the default 32k sync counter is used
as the clocksource (see the clocksource in plat-omap/common.c.)  This
is important for sleep/suspend so there is a valid counter during
sleep.  Note that the suspend/sleep code needs fixing to check for
overflows of this counter.

In addition, the OMAP2/3 details are removed from timer32k.c leaving
that with only OMAP1 specifics.  A follow-up patch will move it from
plat-omap common code to mach-omap1.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 09:57:12 -07:00
Tony Lindgren
225dfda1d6 ARM: OMAP: Split omap_cfg_reg() into omap processor specific functions
Use omap processor specific function depending on system type.
Based on an earlier patch by Klaus Pedersen <klaus.k.pedersen@nokia.com>.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 09:57:11 -07:00
Tony Lindgren
7d7f665d5d ARM: OMAP: Allow registering pin mux function
This patch changes pin multiplexing init to allow registering
custom function. The omap_cfg_reg() func will be split into
omap processor specific functions in later patch.

This is done to make adding omap3 pin multiplexing easier.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14 09:57:11 -07:00
Kyungmin Park
09f21ed4c1 ARM: OMAP2: Register the L4 io bus to boot OMAP2
This patch enables OMAP2 to boot.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-06 13:28:06 +02:00
Russell King
0ff66f0c7a Merge branch 'pxa-plat' into devel
* pxa-plat: (53 commits)
  [ARM] 4762/1: Basic support for Toradex Colibri module
  [ARM] pxa: fix mci_init functions returning -1
  [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
  [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270
  [ARM] 4746/1: pcm027: network support for phyCORE-PXA270
  [ARM] 4745/1: pcm027: default configuration
  [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module
  [NET] smc91x: Make smc91x use IRQ resource trigger flags
  [ARM] pxa: add default config for littleton
  [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
  [ARM] 4664/1: Add basic support for HTC Magician PDA phones
  [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
  [ARM] pxa: skip registers saving/restoring if entering standby mode
  [ARM] pxa: fix PXA27x resume
  [ARM] pxa: Avoid fiddling with CKEN register on suspend
  [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
  [ARM] pxa: Add zylonite MFP wakeup configurations
  [ARM] pxa: program MFPs for low power mode when suspending
  [ARM] pxa: make MFP configuration processor independent
  [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
  ...

Conflicts:

	arch/arm/mach-pxa/ssp.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:21:38 +00:00
Russell King
d0d42df2a4 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel
* at91: (24 commits)
  [ARM] 4615/4: sam926[13]ek buttons updated
  [ARM] 4765/1: [AT91] AT91CAP9A-DK board support
  [ARM] 4764/1: [AT91] AT91CAP9 core support
  [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation
  [ARM] 4761/1: [AT91] Board-support for NEW_LEDs
  [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200
  [ARM] 4759/1: [AT91] Buttons on CSB300
  [ARM] 4758/1: [AT91] LEDs
  [ARM] 4757/1: [AT91] UART initialization
  [ARM] 4756/1: [AT91] Makefile cleanup
  [ARM] 4755/1: [AT91] NAND update
  [ARM] 4754/1: [AT91] SSC library support
  [ARM] 4753/1: [AT91] Use DMA_BIT_MASK
  [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9
  [ARM] 4751/1: [AT91] ISI peripheral on SAM9263
  [ARM] 4750/1: [AT91] STN LCD displays on SAM9261
  [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY
  [ARM] 4646/1: AT91: configurable HZ, default to 128
  [ARM] 4688/1: at91: speed-up irq processing
  [ARM] 4657/1: AT91: Header definition update
  ...

* ep93xx:
  [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations
  [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type
  [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups
  [ARM] 4668/1: ep93xx: implement new GPIO API

* iop:
  [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field
  [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device
  [ARM] 4708/1: iop: update defconfigs for 2.6.24

* kprobes:
  ARM kprobes: let's enable it
  ARM kprobes: special hook for the kprobes breakpoint handler
  ARM kprobes: prevent some functions involved with kprobes from being probed
  ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack
  ARM kprobes: add the kprobes hook to the page fault handler
  ARM kprobes: core code
  ARM kprobes: instruction single-stepping support

* ks8695:
  [ARM] 4603/1: KS8695: debugfs interface to view pin state
  [ARM] 4601/1: KS8695: PCI support

* misc:
  [ARM] remove duplicate includes
  [ARM] CONFIG_DEBUG_STACK_USAGE
  [ARM] 4689/1: small comment wrap fix
  [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix
  [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h
  [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS
  [SERIAL] 21285: Report baud rate back via termios
  [ARM] Remove pointless casts from void pointers,
  [ARM] Misc minor interrupt handler cleanups
  [ARM] Remove at91_lcdc.h
  [ARM] ARRAY_SIZE() cleanup
  [ARM] Update mach-types

* msm:
  [ARM] msm: dma support for MSM7X00A
  [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A)
  [ARM] msm: irq and timer support for ARCH_MSM7X00A
  [ARM] msm: core platform support for ARCH_MSM7X00A

* s3c2410: (33 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

* sa1100:
  [ARM] sa1100: add clock source support

* vfp:
  [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support
  [ARM] 4583/1: ARMv7: Add VFPv3 support
  [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28 13:21:21 +00:00
Russell King
e7b3dc7ef1 [NET] smc91x: Make smc91x use IRQ resource trigger flags
smc91x is shared between many different platforms.  Each platform needs
to specify the interrupt type, and in some cases the irq type depends
on more than just the build configuration - it depends on runtime
checks.

Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide
a way for these flags to be passed via the IRQ resource itself.

Note that IRQF_TRIGGER_* constants are intentionally defined to correspond
with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that
the low bits of PCI iomem resources correspond with the BAR flag bits.

Also provide a way to configure smc91x to read the IRQ flags from the
resource.  Once all platforms have been converted over (signified
by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should
be removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28 13:13:19 +00:00
Russell King
193c3cc125 [ARM] Fix timer damage from d3d74453c3
Move the xtime write mode seqlock into timer_tick(), so it only
surrounds the call to do_timer().

This avoids a deadlock in update_process_times() ...
hrtimer_get_softirq_time() which tries to get a read mode seqlock
on xtime, thereby preventing booting.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 10:17:12 +00:00
Lucas Woods
1d7d4f54b1 [ARM] remove duplicate includes
Signed-off-by: Lucas Woods <woodzy@gmail.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 14:50:07 +00:00
Roel Kluin
710798c3e1 [ARM] Fix assignment instead of condition in arm/mach-omap2/clock.c
Fix assignment instead of condition

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-31 15:21:43 +00:00
Jan Engelhardt
96de0e252c Convert files to UTF-8 and some cleanups
* Convert files to UTF-8.

  * Also correct some people's names
    (one example is Eißfeldt, which was found in a source file.
    Given that the author used an ß at all in a source file
    indicates that the real name has in fact a 'ß' and not an 'ss',
    which is commonly used as a substitute for 'ß' when limited to
    7bit.)

  * Correct town names (Goettingen -> Göttingen)

  * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313)

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:21:04 +02:00
Rafael J. Wysocki
e6c5eb9541 PM: Rework struct platform_suspend_ops
There is no reason why the .prepare() and .finish() methods in 'struct
platform_suspend_ops' should take any arguments, since architectures don't use
these methods' argument in any practically meaningful way (ie.  either the
target system sleep state is conveyed to the platform by .set_target(), or
there is only one suspend state supported and it is indicated to the PM core
by .valid(), or .prepare() and .finish() aren't defined at all).   There also
is no reason why .finish() should return any result.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:18 -07:00
Rafael J. Wysocki
26398a70ea PM: Rename struct pm_ops and related things
The name of 'struct pm_ops' suggests that it is related to the power
management in general, but in fact it is only related to suspend.   Moreover,
its name should indicate what this structure is used for, so it seems
reasonable to change it to 'struct platform_suspend_ops'.   In that case, the
name of the global variable of this type used by the PM core and the names of
related functions should be changed accordingly.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:18 -07:00