Commit Graph

84 Commits

Author SHA1 Message Date
Valentin Longchamp
679bfef0e3 MXC: fix reset for mx31, mx35 and mx27 SoCs
The clock name for the watchdog devices was not set consistently
with mx21 on these platforms, resulting in the reset not to work.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-13 10:24:10 +02:00
Sascha Hauer
a90c31a3b7 pcm970 mmc: Fix ro switch
We have to use mxc_gpio_mode() for the card detection pin
instead of mxc_gpio_setup_multiple_pins() because the latter
does a gpio_request() and thus a later gpio_request() fails.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-13 10:24:07 +02:00
Sascha Hauer
6153384161 pcm038: Add SPI/MC13783 support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-13 10:24:02 +02:00
Sascha Hauer
5cf3bcdada i.MX27 clock: rename spi clocks to match device
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-02 09:03:47 +02:00
Sascha Hauer
c35d3a4181 mx21ads: Fix framebuffer platform data
struct imx_fb_platform_data has changed and the mx21ads was
forgotten to change. Fix it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:16 +02:00
Sascha Hauer
f6d2fa7dcb MX21: Compilation fix for devices.c
The OTG devices are only available on i.MX27, so ifdef
them out for i.MX21.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:15 +02:00
Luotao Fu
0160651a65 pcm038: mux configuration for predefined gpio line
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
2009-08-14 12:41:04 +02:00
Luotao Fu
337316986f mx27: add support for phytec pca100 (phyCARD-s) board
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:59 +02:00
Sascha Hauer
f420db843b MX2: Add SPI devices/resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:52 +02:00
Sascha Hauer
cf87a6e2fe ARM: mxc: Fix i2c_board_info definitions
Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
2009-08-14 12:40:37 +02:00
Eric Benard
a961bf380b Add support for Eukrea's MBIMX27
MBIMX27 is the evaluation board for CPUIMX27 and integrates : a
QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to
SDHC1.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:12 +02:00
Eric Benard
af5b1df713 Add support for Eukrea's CPUIMX27
CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
 NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
 it includes an ethernet PHY in MII mode, an I2C RTC and a
 ST16554 QuadUART on nCS3.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:12 +02:00
javier Martin
627fb3b9d2 MX27: Add USB platform devices and resources
This adds clocks and resources for usb in i.mx27 SoC.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:12 +02:00
Sascha Hauer
61b032ef26 pcm038: Add support for SJA1000 on baseboard
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:09 +02:00
Sascha Hauer
343684ffb7 imxfb: Add support for multiple displays
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:56 +02:00
Sascha Hauer
bf50bcc242 mx2: Codingstyle: Let the compiler count arrays
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:55 +02:00
Sascha Hauer
aa68c02777 mx2: remove mxc_irda platform device
Irda support is handled by the normal ims serial driver, so
we do not need this device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:54 +02:00
Sascha Hauer
c5aa0ad0c5 mxc: turn to soc specific init_irq functions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:54 +02:00
Sascha Hauer
be124c9427 system.c: runtime base address
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:51 +02:00
Sascha Hauer
8db5d1a64d MXC: pass base/irq to mxc_timer_init
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:51 +02:00
Linus Torvalds
2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Martin Fuzzey
a0895162fb MXC : update i.MX21 clock support for USB host.
* Use correct clkdev style usb clock name
* Implement rate setting for USB clock
* Introduce _clk_generic_round_rate to factorize the (now 3) uses of rounding code.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-08 18:01:25 +02:00
Simon POLETTE
add85a418f PATCH] mx27pdk: rename mxc_map_io to mx27_map_io
Hi,
Fixed issue in the mxc-master head :

Signed-off-by: Simon POLETTE <spolette@adnlysd018.(none)>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-05 10:02:26 +02:00
Daniel Schaeffer
8c032ec337 mxc: Add i.MX27LITE board support
Sascha Hauer wrote:
> On Tue, Jun 02, 2009 at 04:18:42PM -0400, Daniel Schaeffer wrote:
>> Add basic support for the Logic i.MX27LITE board.
>>
>> Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com>
>
> Besides the comment made by Fabio this looks ok to me.
>
> Sascha
>
>

Fixed issues pointed out by Fabio and Magnus, and rebased to mxc-master head.

Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-04 09:34:23 +02:00
Rabin Vincent
6b4bfb87b6 mx[23]: don't put clock lookups in __initdata
Remove the __initdata annotation for the clock lookups, since they will
be needed when loading modules which use clk_get().

Tested-by: Agustín Ferrín Pozuelo <gatoguan-os@yahoo.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-03 11:51:06 +02:00
Sascha Hauer
bff0b53bd7 PCM038: Remove unnecessary ifdefs, reorder includes alphabetically
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:19:44 +02:00
Sascha Hauer
f231ea441a pcm038: Setup all iomux pins at once
Also, remove usage of set_irq_type after request_irq.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:19:38 +02:00
Vladimir Barinov
60c24dc79f MX27ADS: Add SDHC support
Add SDHC support for MX27ADS board

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:19:30 +02:00
Vladimir Barinov
9366d8f67c MX27ADS: Add 1-wire support
Add 1-wire support for MX27ADS board

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:19:20 +02:00
Vladimir Barinov
11cda13d48 MX27ADS: Add framebuffer support
Add Sharp-QVGA panel support for MX27ADS board

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:19:11 +02:00
Vladimir Barinov
c981214ac4 MX27ADS: Add I2C support
Add I2C support for MX27ADS board

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:19:01 +02:00
Vladimir Barinov
8d4fd258f9 MX27ADS: Add NAND support
Add NAND support for MX27ADS board

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:18:53 +02:00
Vladimir Barinov
c1a6f12383 MX27ADS: setup all pins at once in one table
Setup all pins at once in one table

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:18:44 +02:00
Fabio Estevam
ec9be0debd MX27: Add basic support to MX27PDK
This patch adds basic support to MX27PDK board http://www.freescale.com/imx27pdk ).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:16:55 +02:00
Ivo Clarysse
6b91edde09 MXC: mx21ads base support
[PATCH v6] MXC: mx21ads base support

Base machine support for the  Freescale i.MX21ADS
(M9328MX21ADSE) Application Development System.

Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:16:24 +02:00
Holger Schurig
fde364742a imx: exit functions can/should be void
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:58 +02:00
Sascha Hauer
cd4a05f9df MXC: rename mxc_map_io to architecture specific versions
This allows us to have more mapping functions for more than one
i.MX architecture in the kernel. As this is the earliest board
specific hook we have, also use it to set the cpu type.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:37 +02:00
Holger Schurig
1b3c9bf2cd imx21: activate i2c
Set the correct clkdev-name for the i2c clock.

It also get's rid of the ARCH_NR_GPIOS define on the rationale
that isn't an ARCH-wide setting anyway. If a device has two
pca953x devices, the reserved number will be wrong.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
2009-04-16 12:57:13 +02:00
Holger Schurig
289a689b10 imx21: fixes some clocknames
Signed-off-by: <hs4233@mail.mn-solutions.de>
2009-04-16 12:57:12 +02:00
Sascha Hauer
ec62169903 i.MX21/27: remove ifdef CONFIG_FB_IMX
Compile in the framebuffer device unconditionally to fix pcm038
compilation without framebuffer support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-27 14:51:14 +01:00
Ilya Yanok
74bef9a4fa mxc: add arch_reset() function
This patch adds arch_reset() function for all mxc platforms.

It also removes (unsused) arch/arm/mach-mx2/system.c file.

This patch has been tested on i.MX1/27/31/35

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-27 14:51:14 +01:00
Russell King
be093beb60 [ARM] pass reboot command line to arch_reset()
OMAP wishes to pass state to the boot loader upon reboot in order to
instruct it whether to wait for USB-based reflashing or not.  There is
already a facility to do this via the reboot() syscall, except we ignore
the string passed to machine_restart().

This patch fixes things to pass this string to arch_reset().  This means
that we keep the reboot mode limited to telling the kernel _how_ to
perform the reboot which should be independent of what we request the
boot loader to do.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-19 16:20:24 +00:00
Sascha Hauer
7c107dcb65 pcm970 baseboard: Add SDHC support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:39 +01:00
Sascha Hauer
1a02be0ee7 MX2: Add SDHC platform_devices and resources
Signed-of-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:36 +01:00
Sascha Hauer
9a51157bab [ARM] pcm038: Fix pins for UART3
The UART3 had a copy-paste bug. instead of claiming rxd, txd, rts and
cts pins, cts and rts were claimed twice

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:31 +01:00
Holger Schurig
6bbdbf2f95 arm/imx: Kconfig beautification
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:18 +01:00
Sascha Hauer
a4e9a65a1f [ARM] PCM038 board: Add I2C support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:12 +01:00
Sascha Hauer
c5d4dbff96 [ARM] MX2: Add I2C devices / resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:12 +01:00
Sascha Hauer
824b16e66b [ARM] MX2: add pwm device/resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:11 +01:00
Sascha Hauer
9db973a59b [ARM] pcm038: Add framebuffer support
Add framebuffer support for PCM038

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:08 +01:00