Commit Graph

17623 Commits

Author SHA1 Message Date
Jie Zhang
a961d65963 Blackfin arch: More explicitly describe what the instructions do in inline assembly.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18 00:00:10 +08:00
Michael Hennerich
5c91fb902d Blackfin arch: Add assembly function insl_16
/*
 * CPUs often take a performance hit when accessing unaligned memory
 * locations. The actual performance hit varies, it can be small if the
 * hardware handles it or large if we have to take an exception and fix
 * it
 * in software.
 *
 * Since an ethernet header is 14 bytes network drivers often end up
 * with
 * the IP header at an unaligned offset. The IP header can be aligned by
 * shifting the start of the packet by 2 bytes. Drivers should do this
 * with:
 *
 * skb_reserve(NET_IP_ALIGN);
 *
 * The downside to this alignment of the IP header is that the DMA is
 * now
 * unaligned. On some architectures the cost of an unaligned DMA is high
 * and this cost outweighs the gains made by aligning the IP header.
 *
 * Since this trade off varies between architectures, we allow
 * NET_IP_ALIGN
 * to be overridden.
 */

This new function insl_16 allows to read form 32-bit IO and writes to
16-bit aligned memory. This is useful in above described scenario -
In particular with the AXIS AX88180 Gigabit Ethernet MAC.
Once the device is in 32-bit mode, reads from the RX FIFO always
decrements 4bytes.
While on the other side the destination address in SDRAM is always
16-bit aligned.
If we use skb_reserve(0) the receive buffer is 32-bit aligned but later
we hit a unaligned exception in the IP code.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17 23:46:58 +08:00
Adrian Bunk
05c484355f Blackfin arch: remove dump_thread()
The only user is the a.out support.

It was therefore removed prior to the blackfin merge from all
architectures not supporting a.out.

Currently, Blackfin doesn't suppport a.out.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18 00:41:56 +08:00
Mike Frysinger
b33d518777 Blackfin arch: fix double fault definition for BF561 core A and core B
VDSP has double fault on core a/b inverted for BF561 -- bit 11 is core a while bit 12 is core b

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:15:47 +08:00
Mike Frysinger
a055b2b4de Blackfin arch: remove useless CONFIG_IRQCHIP_DEMUX_GPIO
since we have this always turned on now and dont want it off (and hasnt been an option in a while)

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:12:32 +08:00
Mike Frysinger
529a73fbae Blackfin arch: punt CONFIG_BFIN -- we already have CONFIG_BLACKFIN
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-23 14:28:44 +08:00
Mike Frysinger
fa43cd8b10 Blackfin arch: add a compatible DOUBLE_FAULT define to enable resets on double faults in either core
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-13 00:31:33 +08:00
Truxton Fulton
05dfa35e84 x86: fix reboot with no keyboard attached
Attempt to fix http://bugzilla.kernel.org/show_bug.cgi?id=8378

Hiroto Shibuya wrote to tell me that he has a VIA EPIA-EK10000 which
suffers from the reboot problem when no keyboard is attached.  My first
patch works for him:

  http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59f4e7d572980a521b7bdba74ab71b21f5995538

But the latest patch does not work for him :

  http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8b93789808756bcc1e5c90c99f1b1ef52f839a51

We found that it was necessary to also set the "disable keyboard" flag in
the command byte, as the first patch was doing.  The second patch tries to
minimally modify the command byte, but it is not enough.

Please consider this simple one-line patch to help people with low end VIA
motherboards reboot when no keyboard is attached.  Hiroto Shibuya has
verified that this works for him (as I no longer have an afflicted
machine).


Additional discussion:

Note that original patch from Truxton DOES
disable keyboard and this has been in main tree since 2.6.14, thus it must have
quite a bit of air time already.

http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.14.y.git;a=commit;h=59f4e7d572980a521b7bdba74ab71b21f5995538

Note that he only mention "System flag" in the description and comment, but
in the code, "disable keyboard" flag is set.

  outb(0x14, 0x60);       /* set "System flag" */

In 2.6.23, he made a change to read the current byte and then mask the flags,
but along this change,  he only set the "System flag" and dropped the setting
of "disable keyboard" flag.

http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.23.y.git;a=commit;h=8b93789808756bcc1e5c90c99f1b1ef52f839a51

   outb(cmd | 0x04, 0x60); /* set "System flag" */

So my request is to restore the setting of disable keyboard flag which has been
there since 2.6.14 but disappeared in 2.6.23.

Cc: Lee Garrett <lee-in-berlin@web.de>
Cc: "Hiroto Shibuya" <hiroto.shibuya@gmail.com>
Cc: Natalie Protasevich <protasnb@gmail.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Aristeu Rozanski <aris@ruivo.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17 16:27:01 +01:00
Randy Dunlap
434b3d3209 x86: voyager use correct header file name
Fix header file name for Voyager build.

In file included from arch/x86/kernel/setup_32.c:61:
include/asm-x86/mach-voyager/setup_arch.h:2:26: error: asm/setup_32.h: No such file or directory
make[1]: *** [arch/x86/kernel/setup_32.o] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17 16:27:00 +01:00
Thomas Gleixner
142d0a674d x86: fix bogus memcpy in es7000_check_dsdt()
es7000_check_dst() contains a memcpy from 0, which probably should have been
a memset. Remove it and check the retunr value from acpi_get_table_header.

Noticed by: Joe Perches <joe@perches.com>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17 16:27:00 +01:00
Eric Paris
ec41878170 SELinux: return EOPNOTSUPP not ENOTSUPP
ENOTSUPP is not a valid error code in the kernel (it is defined in some
NFS internal error codes and has been improperly used other places).  In
the !CONFIG_SECURITY_SELINUX case though it is possible that we could
return this from selinux_audit_rule_init().  This patch just returns the
userspace valid EOPNOTSUPP.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2007-11-17 10:38:16 +11:00
Linus Torvalds
adea27f4ba Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: Fix NULL pointer dereference in nf_nat_move_storage()
  [SUNHME]: VLAN support for sunhme
  [CHELSIO]: Fix skb->dev setting.
  [NETFILTER]: fix compat_nf_sockopt typo
  [INET]: Fix potential kfree on vmalloc-ed area of request_sock_queue
  [VIA_VELOCITY]: Don't oops on MTU change.
  iwl4965: fix not correctly dealing with hotunplug
  rt2x00: Fix chipset revision validation
  iwl3945: place CCK rates in front of OFDM for supported rates
  mac80211: Fix queuing of scan containing a SSID
2007-11-15 16:34:00 -08:00
Linus Torvalds
40787d0099 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] N32 needs to use the compat version of sys_nfsservctl.
  [MIPS] irq_cpu: use handle_percpu_irq handler to avoid dropping interrupts.
  [MIPS] Sibyte: Fix name of clocksource.
  [MIPS] SNI: s/achknowledge/acknowledge/
  [MIPS] Makefile: Fix canonical system names
  [MIPS] vpe: handle halting TCs in an errata safe way.
  [MIPS] Sibyte: Stop timers before programming next even.
  [MIPS] Sibyte: Increase minimum oneshot timer interval to two ticks.
  [MIPS] Lasat: Fix overlap of interrupt number ranges.
  [MIPS] SNI PCIT CPLUS: workaround for b0rked irq wiring of onboard PCI bus 1
  [MIPS] Fix shadow register support.
  [MIPS] Change get_cycles to always return 0.
  [MIPS] Fix typo in R3000 TRACE_IRQFLAGS code
  [MIPS] Sibyte: Replace use of removed IO_SPACE_BASE with IOADDR.
  [MIPS] iounmap if in vr41xx_pciu_init() pci clock is over 33MHz
  [MIPS] BCM1480: Remove duplicate acknowledge of timer interrupt.
  [MIPS] Sibyte: pin timer interrupt to their cores.
  [MIPS] Qemu: Add early printk, your friend in a cold night.
  [MIPS] Convert reference to mem_map to pfn_to_page().
  [MIPS] Sibyte: resurrect old cache hack.
2007-11-15 16:08:49 -08:00
Yoichi Yuasa
89becf5c0d [MIPS] Lasat: Fix overlap of interrupt number ranges.
The range of MIPS_CPU IRQ and the range of LASAT IRQ overlap.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15 23:21:50 +00:00
Ralf Baechle
f6771dbb27 [MIPS] Fix shadow register support.
Shadow register support would not possibly have worked on multicore
systems.  The support code for it was also depending not on MIPS R2 but
VSMP or SMTC kernels even though it makes perfect sense with UP kernels.

SR sets are a scarce resource and the expected usage pattern is that
users actually hardcode the register set numbers in their code.  So fix
the allocator by ditching it.  Move the remaining CPU probe bits into
the generic CPU probe.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15 23:21:49 +00:00
Ralf Baechle
efb9ca08b5 [MIPS] Change get_cycles to always return 0.
This avoids us executing an mfc0 c0_count instruction on processors which
don't have but also on certain R4000 and R4400 versions where reading from
the count register just in the very moment when its value equals
c0_compare will result in the timer interrupt getting lost.

There is still a number of users of get_cycles remaining outside the
arch code:

crypto/tcrypt.c:                start = get_cycles();
crypto/tcrypt.c:                end = get_cycles();
crypto/tcrypt.c:                start = get_cycles();
crypto/tcrypt.c:                end = get_cycles();
crypto/tcrypt.c:                start = get_cycles();
crypto/tcrypt.c:                end = get_cycles();
drivers/char/hangcheck-timer.c: return get_cycles();
drivers/char/hangcheck-timer.c: printk("Hangcheck: Using get_cycles().\n");
drivers/char/random.c:  sample.cycles = get_cycles();
drivers/input/joystick/analog.c:#define GET_TIME(x)     do { x = get_cycles(); }
include/linux/arcdevice.h:          _x = get_cycles(); \
include/linux/arcdevice.h:          _y = get_cycles(); \
mm/slub.c:      if (!s->defrag_ratio || get_cycles() % 1024 > s->defrag_ratio)
mm/slub.c:      p += 64 + (get_cycles() & 0xff) * sizeof(void *);

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15 23:21:49 +00:00
Linus Torvalds
ecefe4a1c3 Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/eeprom: Recognize VGN as a valid Sony Vaio name prefix
  i2c/eeprom: Hide Sony Vaio serial numbers
  i2c-pasemi: Fix NACK detection
  i2c-pasemi: Replace obsolete "driverfs" reference with "sysfs"
  i2c: Make i2c_check_addr static
  i2c-dev: Unbound new-style i2c clients aren't busy
  i2c-dev: "how does it work" comments
2007-11-15 11:01:07 -08:00
Jean Delvare
5e31c2bd3c i2c: Make i2c_check_addr static
i2c_check_addr is only used inside i2c-core now, so we can make it
static and stop exporting it. Thanks to David Brownell for noticing.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-11-15 19:24:02 +01:00
Haavard Skinnemoen
8fea1ad17f [AVR32] Add missing bit in PCCR sysreg
The enable bit was missing...

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-15 13:47:20 +01:00
Haavard Skinnemoen
330a9c1df6 [AVR32] pcmcia ioaddr_t should be 32 bits on AVR32
Define ioaddr_t as u_int on AVR32 just like on ARM and MIPS.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-15 13:47:19 +01:00
Pavel Emelyanov
dab6ba3688 [INET]: Fix potential kfree on vmalloc-ed area of request_sock_queue
The request_sock_queue's listen_opt is either vmalloc-ed or
kmalloc-ed depending on the number of table entries. Thus it 
is expected to be handled properly on free, which is done in 
the reqsk_queue_destroy().

However the error path in inet_csk_listen_start() calls 
the lite version of reqsk_queue_destroy, called 
__reqsk_queue_destroy, which calls the kfree unconditionally. 

Fix this and move the __reqsk_queue_destroy into a .c file as 
it looks too big to be inline.

As David also noticed, this is an error recovery path only,
so no locking is required and the lopt is known to be not NULL.

reqsk_queue_yank_listen_sk is also now only used in
net/core/request_sock.c so we should move it there too.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-15 02:57:06 -08:00
Linus Torvalds
6f37ac793d Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: rt_check_expire() can take a long time, add a cond_resched()
  [ISDN] sc: Really, really fix warning
  [ISDN] sc: Fix sndpkt to have the correct number of arguments
  [TCP] FRTO: Clear frto_highmark only after process_frto that uses it
  [NET]: Remove notifier block from chain when register_netdevice_notifier fails
  [FS_ENET]: Fix module build.
  [TCP]: Make sure write_queue_from does not begin with NULL ptr
  [TCP]: Fix size calculation in sk_stream_alloc_pskb
  [S2IO]: Fixed memory leak when MSI-X vector allocation fails
  [BONDING]: Fix resource use after free
  [SYSCTL]: Fix warning for token-ring from sysctl checker
  [NET] random : secure_tcp_sequence_number should not assume CONFIG_KTIME_SCALAR
  [IWLWIFI]: Not correctly dealing with hotunplug.
  [TCP] FRTO: Plug potential LOST-bit leak
  [TCP] FRTO: Limit snd_cwnd if TCP was application limited
  [E1000]: Fix schedule while atomic when called from mii-tool.
  [NETX]: Fix build failure added by 2.6.24 statistics cleanup.
  [EP93xx_ETH]: Build fix after 2.6.24 NAPI changes.
  [PKT_SCHED]: Check subqueue status before calling hard_start_xmit
2007-11-14 18:51:48 -08:00
Jesper Nilsson
ebd33e11c3 CRIS tlb.h should include linux/pagemap.h
Include linux/pagemap.h for release_pages and page_cache_release.

Fixes compilation error in arch/cris/mm/init.c when CONFIG_SWAP is unset.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
d8e5219f9f CRISv10 improve and bugfix fasttimer
Improve and bugfix CRIS v10 fast timers.

- irq_handler_t now only takes two arguments.
- Keep interrupts disabled as long as we have a reference to the
  fasttimer list and only enable them while doing the callback.
  del_fast_timer may be called from other interrupt context.
- Fix bug where debug code could return without calling local_irq_restore.
- Use jiffies instead of usec (change from struct timeval to fasttime_t).
- Don't initialize static variables to zero.
- Remove obsolete #ifndef DECLARE_WAITQUEUE code.
- fast_timer_init should be __initcall.
- Change status/debug variables to unsigned.
- Remove CVS log and CVS id.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
4b7e888933 CRIS don't include bitops.h in posix_types.h
In file included from include/asm/byteorder.h:23,
                 from include/asm-generic/bitops/le.h:5,
                 from include/asm-generic/bitops/ext2-non-atomic.h:4,
                 from include/asm/bitops.h:163,
                 from include/linux/bitops.h:17,
                 from include/asm/posix_types.h:55,
                 from include/linux/posix_types.h:47,
                 from include/linux/types.h:11,
                 from include/linux/capability.h:16,
                 from include/linux/sched.h:49,
                 from arch/cris/kernel/asm-offsets.c:1:
include/linux/byteorder/little_endian.h:43: parse error before "__cpu_to_le64p"
include/linux/byteorder/little_endian.h:44: warning: return type defaults to `int'
include/linux/byteorder/little_endian.h: In function `__cpu_to_le64p':
include/linux/byteorder/little_endian.h:45: `__le64' undeclared (first use in this function)

Remove include of asm/bitops.h, not needed here, corrects compilation error
(__le64 undeclared).

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:46 -08:00
Jesper Nilsson
7b275523ab cris build fixes: corrected and improved NMI and IRQ handling
Corrects compile errors and the following:

- Remove oldset parameter from do_signal and do_notify_resume.

- Modified to fit new consolidated IRQ handling code.

- Reverse check order between external nmi and watchdog nmi to avoid false
  watchdog oops in case of a glitch on the nmi pin.

- Return from an pin-generated NMI the same way as for other interrupts.

- Moved blocking of ethernet rx/tx irq from ethernet interrupt handler to
  low-level asm interrupt handlers.  Fixed in the multiple interrupt
  handler also.

- Add space for thread local storage in thread_info struct.

- Add NO_DMA to Kconfig, and include arch specific Kconfig using arch
  independent path. Include subsystem Kconfigs for pcmcia, usb, i2c,
  rtc and pci.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:45 -08:00
Jesper Nilsson
bafef0ae9d cris build fixes: update eth_v10.c ethernet driver
New (updated) version of ethernet driver for cris v10.

- First steps to simplify and make the MII code more similar
  between the etrax100 and etraxfs ports.

- Start the transmit queue before enabling tx interrupts
  to avoid race with the first frame.

- Flip the comparition statement to stick to physical addresses
  to avoid phys_to_virt mapping a potential null pointer.
  This was not an error but the change simplifies debugging
  of address-space mappings.

- Made myPrevRxDesc local to e100_rx since it was only used there.
  Fixed out of memory handling in e100_rx.  If dev_alloc_skb() fails
  persistently the system is hosed anyway but at least it won't
  loop in an interrupt handler.

- Correct some code formatting issues.

- Add defines SET_ETH_ENABLE_LEDS, SET_ETH_DISABLE_LEDS
  and SET_ETH_AUTONEG used in new cris v10 ethernet driver.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:45 -08:00
Jesper Nilsson
eda35b64a7 cris build fixes: add baud rate defines
Add missing defines for (unsupported) baud rates.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:45 -08:00
Andrew Morton
9587997a4a cris-build-fixes-atomich-needs-compilerh-fix
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:45 -08:00
Jesper Nilsson
df2b84a1f5 cris build fixes: atomic.h needs compiler.h
Include file linux/compiler.h is needed for 'likely'.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:45 -08:00
Jesper Nilsson
80bf7a5be0 cris build fixes: hardirq.h: include asm/irq.h
Include asm/irq.h to avoid undefined value warning.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:45 -08:00
Jesper Nilsson
0c3537ffca cris build fixes: Add missing syscalls
Add missing syscalls to cris architecture.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:45 -08:00
Jesper Nilsson
b956947106 cris build fixes: fix csum_tcpudp_magic() declaration
Remove int from prototype, no longer needed and causes compile error.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:44 -08:00
Jan Blunck
77f2878b4f oprofile: fix oops on x86 32-bit
x86 32-bit isn't saving the stack pointer to pt_regs->esp when an
interrupt occurs.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Tested-by: Robert Fitzsimons <robfitz@273k.net>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:44 -08:00
Jan Kara
7c06a8dc64 Fix 64KB blocksize in ext3 directories
With 64KB blocksize, a directory entry can have size 64KB which does not
fit into 16 bits we have for entry lenght.  So we store 0xffff instead and
convert value when read from / written to disk.  The patch also converts
some places to use ext3_next_entry() when we are changing them anyway.

[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:43 -08:00
Eric W. Biederman
57d5f66b86 pidns: Place under CONFIG_EXPERIMENTAL
This is my trivial patch to swat innumerable little bugs with a single
blow.

After some intensive review (my apologies for not having gotten to this
sooner) what we have looks like a good base to build on with the current
pid namespace code but it is not complete, and it is still much to simple
to find issues where the kernel does the wrong thing outside of the initial
pid namespace.

Until the dust settles and we are certain we have the ABI and the
implementation is as correct as humanly possible let's keep process ID
namespaces behind CONFIG_EXPERIMENTAL.

Allowing us the option of fixing any ABI or other bugs we find as long as
they are minor.

Allowing users of the kernel to avoid those bugs simply by ensuring their
kernel does not have support for multiple pid namespaces.

[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Kir Kolyshkin <kir@swsoft.com>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:43 -08:00
Bjorn Helgaas
9626f1f117 rtc: fall back to requesting only the ports we actually use
Firmware like PNPBIOS or ACPI can report the address space consumed by the
RTC.  The actual space consumed may be less than the size (RTC_IO_EXTENT)
assumed by the RTC driver.

The PNP core doesn't request resources yet, but I'd like to make it do so.
If/when it does, the RTC_IO_EXTENT request may fail, which prevents the RTC
driver from loading.

Since we only use the RTC index and data registers at RTC_PORT(0) and
RTC_PORT(1), we can fall back to requesting just enough space for those.

If the PNP core requests resources, this results in typical I/O port usage
like this:

    0070-0073 : 00:06		<-- PNP device 00:06 responds to 70-73
      0070-0071 : rtc		<-- RTC driver uses only 70-71

instead of the current:

    0070-0077 : rtc		<-- RTC_IO_EXTENT == 8

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:41 -08:00
Shannon Nelson
7bb67c14fd I/OAT: Add support for version 2 of ioatdma device
Add support for version 2 of the ioatdma device.  This device handles
the descriptor chain and DCA services slightly differently:
 - Instead of moving the dma descriptors between a busy and an idle chain,
   this new version uses a single circular chain so that we don't have
   rewrite the next_descriptor pointers as we add new requests, and the
   device doesn't need to re-read the last descriptor.
 - The new device has the DCA tags defined internally instead of needing
   them defined statically.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: "Williams, Dan J" <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:41 -08:00
Andrew Morton
cfb5285660 revert "Task Control Groups: example CPU accounting subsystem"
Revert 62d0df6406.

This was originally intended as a simple initial example of how to create a
control groups subsystem; it wasn't intended for mainline, but I didn't make
this clear enough to Andrew.

The CFS cgroup subsystem now has better functionality for the per-cgroup usage
accounting (based directly on CFS stats) than the "usage" status file in this
patch, and the "load" status file is rather simplistic - although having a
per-cgroup load average report would be a useful feature, I don't believe this
patch actually provides it.  If it gets into the final 2.6.24 we'd probably
have to support this interface for ever.

Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:40 -08:00
Ken Chen
45c682a68a hugetlb: fix i_blocks accounting
For administrative purpose, we want to query actual block usage for
hugetlbfs file via fstat.  Currently, hugetlbfs always return 0.  Fix that
up since kernel already has all the information to track it properly.

Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:40 -08:00
Adam Litke
9a119c056d hugetlb: allow bulk updating in hugetlb_*_quota()
Add a second parameter 'delta' to hugetlb_get_quota and hugetlb_put_quota to
allow bulk updating of the sbinfo->free_blocks counter.  This will be used by
the next patch in the series.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:40 -08:00
Adam Litke
5b23dbe817 hugetlb: follow_hugetlb_page() for write access
When calling get_user_pages(), a write flag is passed in by the caller to
indicate if write access is required on the faulted-in pages.  Currently,
follow_hugetlb_page() ignores this flag and always faults pages for
read-only access.  This can cause data corruption because a device driver
that calls get_user_pages() with write set will not expect COW faults to
occur on the returned pages.

This patch passes the write flag down to follow_hugetlb_page() and makes
sure hugetlb_fault() is called with the right write_access parameter.

[ezk@cs.sunysb.edu: build fix]
Signed-off-by: Adam Litke <agl@us.ibm.com>
Reviewed-by: Ken Chen <kenchen@google.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Jeff Dike
8cd8fa557f uml: update address space affected by pud_clear
pud_clear wasn't setting the _PAGE_NEWPAGE bit, fooling tlb_flush into
thinking that this area of the address space was up-to-date and not unmapping
whatever was covered by the pud.

This manifested itself as ldconfig on x86_64 complaining about the first
library it looked at not being a valid ELF file.  A config file is mapped at
0x4000000, as the only thing mapped under its pud, and unmapped.  The
unmapping caused a pud_clear, which, due to this bug, didn't actually unmap
the config file data on the host.  The first library is then mapped at the
same location, but is not actually mapped on the host because accesses to it
cause no page faults.  As a result, ldconfig sees the old config file data.

[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:37 -08:00
Herbert Xu
fb93134dfc [TCP]: Fix size calculation in sk_stream_alloc_pskb
We round up the header size in sk_stream_alloc_pskb so that
TSO packets get zero tail room.  Unfortunately this rounding
up is not coordinated with the select_size() function used by
TCP to calculate the second parameter of sk_stream_alloc_pskb.

As a result, we may allocate more than a page of data in the
non-TSO case when exactly one page is desired.

In fact, rounding up the head room is detrimental in the non-TSO
case because it makes memory that would otherwise be available to
the payload head room.  TSO doesn't need this either, all it wants
is the guarantee that there is no tail room.

So this patch fixes this by adjusting the skb_reserve call so that
exactly the requested amount (which all callers have calculated in
a precise way) is made available as tail room.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 15:45:21 -08:00
Linus Torvalds
9418d5dc9b Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (i5k_amb) Convert macros to C functions
  hwmon: (w83781d) Add missing curly braces
  hwmon: (abituguru3) Identify ABit IP35 Pro as such
  hwmon: (f75375s) pwmX_mode sysfs files writable for f75375 variant
  hwmon: (f75375s) On n2100 systems, set fans to full speed on boot
  hwmon: (f75375s) Allow setting up fans with platform_data
  hwmon: (f75375s) Add new style bindings
  hwmon: (lm70) Convert semaphore to mutex
  hwmon: (applesmc) Add support for Mac Pro 2 x Quad-Core
  hwmon: (abituguru3) Add support for 2 new motherboards
  hwmon: (ibmpex) Change printk to dev_{info,err} macros
  hwmon: (i5k_amb) New memory temperature sensor driver
  hwmon: (f75375s) fix pwm mode setting
  hwmon: (ibmpex.c) fix NULL dereference
  hwmon: (sis5595) Split sis5595_attributes_opt
  hwmon: (sis5595) Add individual alarm files
  hwmon: (w83627hf) push nr+1 offset into *_REG_FAN macros and simplify
  hwmon: (w83627hf) hoist nr-1 offset out of show-store-temp-X
  hwmon: Add power meter spec to Documentation/hwmon/sysfs-interface
2007-11-13 09:09:36 -08:00
Linus Torvalds
31083eba37 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits)
  [NETFILTER]: xt_time should not assume CONFIG_KTIME_SCALAR
  [NET]: Move unneeded data to initdata section.
  [NET]: Cleanup pernet operation without CONFIG_NET_NS
  [TEHUTI]: Fix incorrect usage of strncat in bdx_get_drvinfo()
  [MYRI_SBUS]: Prevent that myri_do_handshake lies about ticks.
  [NETFILTER]: bridge: fix double POSTROUTING hook invocation
  [NETFILTER]: Consolidate nf_sockopt and compat_nf_sockopt
  [NETFILTER]: nf_nat: fix memset error
  [INET]: Use list_head-s in inetpeer.c
  [IPVS]: Remove unused exports.
  [NET]: Unexport sysctl_{r,w}mem_max.
  [TG3]: Update version to 3.86
  [TG3]: MII => TP
  [TG3]: Add A1 revs
  [TG3]: Increase the PCI MRRS
  [TG3]: Prescaler fix
  [TG3]: Limit 5784 / 5764 to MAC LED mode
  [TG3]: Disable GPHY autopowerdown
  [TG3]: CPMU adjustments for loopback tests
  [TG3]: Fix nvram selftest failures
  ...
2007-11-13 09:04:48 -08:00
Linus Torvalds
a7fe77161d Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Silence an annoying boot message
  [POWERPC] Fix early btext debug on PowerMac
  [POWERPC] Demote clockevent printk to KERN_DEBUG
  [POWERPC] Fix CONFIG_SMP=n build error on ppc64
  [POWERPC] Avoid unpaired stwcx. on some processors
  [POWERPC] Fix oops related to 4xx flush_tlb_page modification
  [POWERPC] cpm: Fix a couple minor issues in cpm_common.c.
  [POWERPC] Add -mno-spe for ARCH=powerpc builds
2007-11-13 09:04:03 -08:00
Denis V. Lunev
022cbae611 [NET]: Move unneeded data to initdata section.
This patch reverts Eric's commit 2b008b0a8e

It diets .text & .data section of the kernel if CONFIG_NET_NS is not set.
This is safe after list operations cleanup.

Signed-of-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 03:23:50 -08:00
Pavel Emelyanov
d71209ded2 [INET]: Use list_head-s in inetpeer.c
The inetpeer.c tracks the LRU list of inet_perr-s, but makes
it by hands. Use the list_head-s for this.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:27:28 -08:00
Becky Bruce
b64f87c16f [POWERPC] Avoid unpaired stwcx. on some processors
The context switch code in the kernel issues a dummy stwcx. to clear the
reservation, as recommended by the architecture.  However, some processors
can have issues if this stwcx to address A occurs while the reservation
is already held to a different address B.  To avoid this problem, the dummy
stwcx. needs to be paired with a dummy lwarx to the same address.

This adds the dummy lwarx, and creates a cpu feature bit to indicate
which cpus are affected.  Tested on mpc8641_hpcn_defconfig in
arch/powerpc; build tested in arch/ppc.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 16:22:43 +11:00