Commit Graph

630 Commits

Author SHA1 Message Date
Linus Torvalds
a457aa6c2b Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial 2006-01-09 17:06:53 -08:00
Adrian Bunk
93b1fae491 spelling: s/trough/through/
Additionally, one comment was reformulated by Joe Perches <joe@perches.com>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-10 00:13:33 +01:00
Ben Dooks
fe38ea5623 [ARM] 3246/1: S3C24XX - retab clock list in arch/arm/mach-s3c2410/clock.c
Patch from Ben Dooks

Properly tabulate the clock table in arch/arm/mach-s3c2410/clock.c
and put the requisite commas on the end of the structs.

Fix the comment about clock enable and disable in the setup code

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 21:16:18 +00:00
Deepak Saxena
9d4ae7276a [ARM] 3070/2: Add __ioremap_pfn() API
Patch from Deepak Saxena

In working on adding 36-bit addressed supersection support to ioremap(),
I came to the conclusion that it would be far simpler to do so by just
splitting __ioremap() into a main external interface and adding an
__ioremap_pfn() function that takes a pfn + offset into the page that
__ioremap() can call. This way existing callers of __ioremap() won't have
to change their code and 36-bit systems will just call __ioremap_pfn()
and we will not have to deal with unsigned long long variables.

Note that __ioremap_pfn() should _NOT_ be called directly by drivers
but is reserved for use by arch_ioremap() implementations that map
32-bit resource regions into the real 36-bit address and then call
this new function.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 19:23:11 +00:00
Russell King
16ed926eee [ARM] Only call set_type method in setup_irq if it's defined
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 19:19:18 +00:00
Russell King
0a3a98f6dd Merge Linus' tree. 2006-01-09 19:18:33 +00:00
SAN People
73a59c1c4a [ARM] 3240/2: AT91RM9200 support for 2.6 (Core)
Patch from SAN People

Following changes were made to clock.c:

1) Replaced <asm/hardware/clock.h> with <linux/clk.h>
2) Removed old unused clk_enable & clk_disable.
3) Replaced clk_use/clk_unuse with clk_enable/clk_disable.

Otherwise it's the same as the previous patch.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
Russell King
63dcf0ad2a [ARM] Remove CONFIG_ARCH_CAMELOT from defconfigs
EPXA10DB has gone, no need to keep the symbol in the defconfigs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 13:32:56 +00:00
Russell King
66a3454e1a [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 12:57:05 +00:00
Matt Mackall
e585e47031 [PATCH] tiny: Make *[ug]id16 support optional
Configurable 16-bit UID and friends support

This allows turning off the legacy 16 bit UID interfaces on embedded platforms.

   text    data     bss     dec     hex filename
3330172  529036  190556 4049764  3dcb64 vmlinux-baseline
3328268  529040  190556 4047864  3dc3f8 vmlinux

From: Adrian Bunk <bunk@stusta.de>

    UID16 was accidentially disabled for !EMBEDDED.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:11 -08:00
Andrew Morton
a136564702 [PATCH] remove gcc-2 checks
Remove various things which were checking for gcc-1.x and gcc-2.x compilers.

From: Adrian Bunk <bunk@stusta.de>

    Some documentation updates and removes some code paths for gcc < 3.2.

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:02 -08:00
Adrian Bunk
2a10e0b28b [PATCH] move rtc_interrupt() prototype to rtc.h
This patch moves the rtc_interrupt() prototype to rtc.h and removes the
prototypes from C files.

It also renames static rtc_interrupt() functions in
arch/arm/mach-integrator/time.c and arch/sh64/kernel/time.c to avoid compile
problems.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Gortmaker <p_gortmaker@yahoo.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:47 -08:00
Russell King
9ded96f24c [PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:46 -08:00
Tim Schmielau
de25968cc8 [PATCH] fix more missing includes
Include fixes for 2.6.14-git11.  Should allow to remove sched.h from
module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390.  Probably more
to come since I haven't yet checked the other archs.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:45 -08:00
Woody Suwalski
b2de464f7f [PATCH] ARM: Netwinder ds1620 driver needs an export to be built as module
ds1620 module is using gpio_read symbol, so works only if "built-in" symbol
needs to be exported from the kernel image

Signed-off-by: Woody Suwalski <woodys@xandros.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:39 -08:00
Russell King
0fec53a24a [ARM] Remove EPXA10DB machine support
EPXA10DB seems to be uncared for:
- the "PLD" code has never been merged
- no one has reported that this platform has been broken since
  at least 2.6.10
- interest seems to have dried up around March 2003.

Therefore, remove EPXA10DB support.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-08 22:37:46 +00:00
Russell King
f8ce25476d [ARM] Move asm/hardware/clock.h to linux/clk.h
This is needs to be visible to other architectures using the AMBA
bus and peripherals.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 16:15:52 +00:00
Russell King
de1d815fcc [ARM] Move AMBA bus code to drivers/amba/
Make the AMBA bus code visible to other architectures.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 14:54:15 +00:00
Russell King
123656d4cc Merge with Linus' kernel. 2006-01-07 14:40:05 +00:00
Russell King
a62c80e559 [ARM] Move AMBA include files to include/linux/amba/
Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use.  Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 13:52:45 +00:00
Richard Purdie
2c041f4b9b [ARM] 3235/1: SharpSL PM: Fix a gcc4 build error
Patch from Richard Purdie

Fix a gcc4 build error (incomplete element type) in the pxa SharpSL
PM code.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 11:12:26 +00:00
Greg Kroah-Hartman
2b48716d1d [PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer needed
Now that i2c_add_driver() doesn't need the module owner to be set by
hand, we can delete it from the drivers.  This patch catches all of the
drivers that I found in the current tree (if a driver sets the .owner by
hand, it's not a problem, just not needed.)

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Jean Delvare <khali@linux-fr.org>
2006-01-05 22:16:25 -08:00
Jean Delvare
b33a665dba [PATCH] i2c: Drop i2c_driver.{owner,name}, 10 of 11
We should use the i2c_driver.driver's .name and .owner fields
instead of the i2c_driver's ones.

This patch updates the drivers for arm arch.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
CC: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 22:16:24 -08:00
Jean Delvare
cde7859bda [PATCH] i2c: Rework client usage count, 2 of 3
Make I2C_CLIENT_ALLOW_USE the default for all i2c clients. It doesn't
hurt if the usage count is actually never used for any given driver,
and allows for nice code simplifications in i2c-core.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 22:16:22 -08:00
Jean Delvare
8a9947552d [PATCH] i2c: Drop i2c_driver.flags, 2 of 3
Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we
can simply make it the default and drop the flag. If any driver really
doesn't want to be notified when i2c adapters are added, that driver
can simply omit to set .attach_adapter. This approach is also more
robust as it prevents accidental NULL pointer dereferences.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 22:16:21 -08:00
Jared Hulbert
5b2e98cdf3 [ARM] 3206/1: Modifications to the bus arbiter controller for the Intel PXA27x
Patch from Jared Hulbert

The following patch changes the bus arbiter controller settings
for the Intel PXA27x Application Processor Family.  Up to 5%
better video performance.  It parks the bus on the core while not
in use and sets the arbitration for other bus items.  The patch
only applies changes to the Intel Mainstone development platform.

This patch is not compatible with preproduction Intel PXA27x
silicon.

This patch is based on the Intel Linux Preview Kit released to the
public on 25 Feb. 2005 found at
ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/xscale/mainstone/02-25-2005/.

Signed-off-by: Justin A Treon <justin_treon@yahoo.com>
Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 21:12:26 +00:00
Deepak Saxena
54e269ead6 [ARM] 3226/1: IXP4xx runtime expansion bus window size configuration
Patch from Deepak Saxena

The expansion bus on the IXP46x NPU can be configured for either 32MiB or
16MiB windows and changing the configuration causes the base address for
each chip select for each region to change. Because of this, we cannot
hardcode the physical base as we currently do. This patch checks the
expansion bus configuration registers at runtime to determine the
appropriate window size. Note that this requires that the bootloader
already configured the device sizes appropriately, but I feel that is
valid assumption to make as the bootloader must configure and access
the flash window, the output display (LCD, LEDs, etc) window, and
other expansion bus devices.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:59:29 +00:00
Dan Williams
2b9ac7c15c [ARM] 3217/1: iop331 uarts as platform devices
Patch from Dan Williams

Convert old-style serial devices to platform devices so that printk's are visible during the boot process.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:53:02 +00:00
Sascha Hauer
6a2273d6fc [ARM] 3231/1: mx1ads board support cleanup
Patch from Sascha Hauer

- remove unnecessary mappings
- rename mx1ads_device to cs89x0_device, because
  that's what it is
- fix io/irq resource for cs89x0 device

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:58 +00:00
Richard Purdie
945b957972 [ARM] 3230/1: Sharp Scoop: Fix Shared Power Control Issues
Patch from Richard Purdie

The SL-Cxx00 devices have a power control register in SCOOP that is
shared by both CF and MMC/SD card slots. The CF reset code was resetting
this register leading to various lockups as the MMC power was suddenly
lost. This patch handles the CPR register in a more sensitive manner.

It also removes some unneeded collie specific calls as the reset code
handles this.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:57 +00:00
Richard Purdie
53b7c2b243 [ARM] 3229/1: Remove uneeded ARM apm dependency on PM_LEGACY
Patch from Richard Purdie

ARM doesn't use ACPI so ARM's apm implementation has no need to depend
on PM_LEGACY. This patch removes that dependency.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:55 +00:00
Richard Purdie
b7557de41a [ARM] 3228/1: SharpSL: Move PM code to arch/arm/common
Patch from Richard Purdie

This patch moves a large chunk of the sharpsl_pm driver to
arch/arm/common so that it can be reused on other devices such as the
SL-5500 (collie). It also abstracts some functions from the core into
the machine and platform specific parts of the driver to aid reuse.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:55 +00:00
Richard Purdie
3125c68d70 [ARM] 3227/1: Spitz: Add pxa27x OHCI platform specific code
Patch from Richard Purdie

Add platform code to enable the ohci device on the pxa27x based
Sharp Zaurus Cxx00 devices.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:52 +00:00
Linus Torvalds
db9edfd7e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04 18:44:12 -08:00
Paul Jackson
6d20b035de [PATCH] driver kill hotplug word from sn and others fix
The first of these changes s/hotplug/uevent/ was needed to
compile sn2_defconfig (ia64/sn).  The other three files
changed are blind changes of all remaining bus_type.hotplug
references I could find to bus_type.uevent.

This patch attempts to finish similar changes made in the
gregkh-driver-kill-hotplug-word-from-driver-core Nov 22 patch.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Richard Purdie
81f280e22f [PATCH] USB: pxa27x OHCI - Separate platform code from main driver
To allow multiple platforms to use the PXA27x OHCI driver, the platform
code needs to be moved into the board specific files in
arch/arm/mach-pxa. This patch does this for mainstone and adds
preliminary hooks to allow other boards to use the driver.

This has been compile tested for mainstone and successfully run on Spitz
(Sharp Zaurus SL-C3000) with the addition of an appropriate board
support file.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:28 -08:00
Deepak Saxena
b1ad3a57d3 [ARM] 3221/1: Update IXP4xx defconfig
Patch from Deepak Saxena

Add NAS 100d to machine build list and update to new 2.6.15 options.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>

---
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
Rod Whitby
313cbb5519 [ARM] 3218/1: PAGE_SHIFT undeclared in arch-ixp4xx/memory.h (adjust_zones moved out of line)
Patch from Rod Whitby

PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error:

CC [M] sound/core/memory.o
In file included from include/asm/memory.h:27,
from include/asm/io.h:28,
from sound/core/memory.c:24:
include/asm/arch/memory.h: In function `__arch_adjust_zones':
include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use
in this function)

This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback:

Russell King wrote:
> The error you see came up on SA1100.  The best solution was to move
> the __arch_adjust_zones() function out of line.  I suggest ixp4xx
> does the same.

I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:13 +00:00
Deepak Saxena
8d27e6992b [ARM] 3220/1: Remove gpio_isr_line_clear() from NAS 100d
Patch from Deepak Saxena

This patch removes referneces to gpio_isr_line_clear() from the
NAS 100d platform implementation.

Depends on 3192/1 and 3215/1

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:12 +00:00
Rod Whitby
3145d8a6cc [ARM] 3215/1: Iomega NAS 100d (MACH_NAS100D) machine support
Patch from Rod Whitby

This patch adds support for a new arm/ixp4xx machine - the Iomega NAS 100d network attached storage product.  The NAS100D is a consumer device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an Atheros mini-PCI card.

Work on porting the latest 2.6.x kernel to this device is being done by
the NSLU2-Linux project (the same team who maintains the port to the
Linksys NSLU2 device).  In particular, the majority of this patch was
authored by Alessandro Zummo, based on the work done for MACH_NSLU2
support by the NSLU2-Linux core team of developers.

MACH_NAS100D (as implemented by this patch) can be enabled in jumbo
ixp4xx kernels without any affect on the other machines supported by
that kernel.

This patch applies cleanly against 2.6.15-rc7 and should be trivial to
apply to later kernel versions. It does not depend upon any other
patches.

Modified files (and number of lines inserted):
 arch/arm/mach-ixp4xx/Kconfig           |    8
 arch/arm/mach-ixp4xx/Makefile          |    1
 include/asm-arm/arch-ixp4xx/hardware.h |    1
 include/asm-arm/arch-ixp4xx/irqs.h     |    9
 include/asm-arm/arch-ixp4xx/nas100d.h  |   75
 arch/arm/mach-ixp4xx/nas100d-pci.c     |   77
 arch/arm/mach-ixp4xx/nas100d-power.c   |   69
 arch/arm/mach-ixp4xx/nas100d-setup.c   |  133

-- Rod Whitby (NSLU2-Linux project lead)

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:11 +00:00
Deepak Saxena
f7e8bbb820 [ARM] 3192/1: Remove gpio_isr_line_clear() API from IXP4xx
Patch from Deepak Saxena

Other than interrupt masking purposes, this API is only used when
configuring interrupt lines and this patch moves that functionality
directly into the ixp4xx_set_irq_type() implementation as board level
PCI code should not need to worry about those details.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:10 +00:00
Russell King
b3a962455b [ARM] Remove SA1100 PM prepare/finish ops
These are empty, unnecessary functions, so remove them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:55:41 +00:00
Russell King
d7b4a75677 [ARM] Move DMA exports to be next to each function
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:52:45 +00:00
Russell King
95ba9fb06b [ARM] Remove definition of MAX_DMA_CHANNELS to zero
Since we now only build arch/arm/kernel/dma.c on machine types
which set ISA_DMA_API, we don't need to define MAX_DMA_CHANNELS
to 0 to indicate this - this definition becomes superfluous.
Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:51:51 +00:00
Russell King
065909b915 [ARM] Refine selection of ISA_DMA_API and generic dma.c code
ISA_DMA_API tells the rest of the kernel if the ISA DMA API is
available.  Select this symbol only on machine types which make
use of the ISA DMA API.

Make building of arch/arm/kernel/dma.c depend on this symbol -
if a machine does not support the ISA DMA API, it's pointless
building this file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:44:16 +00:00
Russell King
6842b92992 [ARM] Use core_initcall() to initialise ARM DMA
There's no need to have DMA initialised at the same time as
interrupts.  Move it to a core_initcall().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:17:08 +00:00
Russell King
7cdad48297 [ARM] Remove '__address' from scatterlist and convert to DMA API
The old __address element in struct scatterlist remained from older
kernels because the ARM DMA emulation code made use of it.  Move
this field into struct dma_struct, and convert DMA emulation code
to setup a SG entry as required.

Also, convert DMA emulation code to use the new DMA API rather
than the PCI DMA API.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 15:08:30 +00:00
Russell King
333c9624b7 [ARM] Move ISA DMA bus_to_virt() out of set_dma_addr()
Allow the compiler to optimise the bus_to_virt(virt_to_bus())
transformation in the ARM ISA DMA interface.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 14:41:29 +00:00
Russell King
109a937880 [ARM] Remove unused dma.c files
CLPS711x, EPXA10DB and Integrator contained a dma.c file which has never
been built.  Remove these redundant files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 14:06:31 +00:00
Russell King
a8d3584a2d [ARM] Remove clk_use()/clk_unuse()
It seems that clk_use() and clk_unuse() are additional complexity
which isn't required anymore.  Remove them from the clock framework
to avoid the additional confusion which they cause, and update all
ARM machine types except for OMAP.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 18:41:37 +00:00