Commit Graph

14 Commits

Author SHA1 Message Date
Greg Ungerer
1b718c71b7 m68knommu: clean up ColdFire 527x interrupt setup
With the common intc-2 interrupt controller code in place the ColdFire
527x family startup code can be greatly simplified. Remove all the
interrupt masking code, and the per-device interrupt config here.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16 09:43:41 +10:00
sfking@fdwdc.com
f1554da34f generic GPIO support for the Freescale Coldfire 527x.
Add support for the 5271 & 5275.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10 12:01:23 +10:00
Greg Ungerer
4c0b008d49 m68knommu: move CPU reset code for the 527x ColdFire into its platform code
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11 13:09:10 +10:00
Richard Retanubun
592578a1dd m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.
This processor only have one FEC and its MDIO pins are
located at a different offset than the code used for
the current CONFIG_M527x.

Tesed on M5271EVB eval platform.
Without this patch the FEC driver will report no PHY attached
if the bootloader does not pre-initialize the PAR_FECI2C GPIO register.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-22 14:45:07 +10:00
Greg Ungerer
ffba3f48bc fec: add FEC platform support to ColdFire CPU's setup code
m68knommu: add FEC platform support to ColdFire CPU's setup code

Move the per-CPU FEC driver setup code into the actual platform
setup code for each ColdFire CPU varient.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:40:38 -08:00
Greg Ungerer
c25f0a0f7f m68knommu: use asflags instead of EXTRA_AFLAGS
Modify the extra asm flags for debugger capabilities, use asflags instead for
EXTRA_AFLAGS.  Suggestion from Sam Ravnborg.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 20:58:05 -08:00
Greg Ungerer
e206da0bb3 m68knommu: platform setup for 527x ColdFire parts
Switch to platform style configuration for 527x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 20:55:43 +11:00
Greg Ungerer
2f2c267989 m68knommu: cleanup m68knommu timer code
Reduce the function pointer mess of the m68knommu timer code by calling
directly to the local hardware's timer setup, and expose the local
common timer interrupt handler to the lower level hardware timer.

Ultimately this will save definitions of all these functions across all
the platform code to setup the function pointers (which for any given
m68knommu CPU family member can be only one set of hardware timer
functions).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 08:32:35 -07:00
Sam Ravnborg
714055ede4 kbuild: fix AFLAGS use in h8300 and m68knommu
In most cases when AFALGS is manipuled direct this is a bug
and EXTRA_AFLAGS should have been used.
Fix the obvious candidates.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
2007-10-15 21:03:59 +02:00
Greg Ungerer
374c3f552d m68knommu: remove use of colfire_trap_init
The switch to using the generic irq framework removed the
coldfire_trap_init() code, so remove all references to it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:05:20 -07:00
Greg Ungerer
bc72450aeb m68knommu: make BOOTPARAM setup common
Currently most of the m68knommu cpu/board setup files are handling
the setup of fixed boot parameters (via CONFIG_BOOTPARAM) themselves.
Move all this into the common setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25 11:05:01 -07:00
Greg Ungerer
eaefd5fb7d [PATCH] m68knommu: use irq_handler_t for passing handler types
Use irq_handler_t for passing clock handler routine around.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 10:45:33 -08:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00