Commit Graph

318 Commits

Author SHA1 Message Date
Pavel Machek
ca078bae81 [PATCH] swsusp: switch pm_message_t to struct
This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Ralf Baechle
875d43e72b [PATCH] mips: clean up 32/64-bit configuration
Start cleaning 32-bit vs. 64-bit configuration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:06 -07:00
Linus Torvalds
a8e4f435d9 Merge refs/heads/upstream from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-08-29 22:04:58 -07:00
Stephen Rothwell
fb120da678 [PATCH] Make MODULE_DEVICE_TABLE work for vio devices
Make MODULE_DEVICE_TABLE work for vio devices.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:31:56 +10:00
Stephen Rothwell
71d276d751 [PATCH] Create vio_bus_ops
Create vio_bus_ops so that we just pass a structure to vio_bus_init
instead of three separate function pointers.

Rearrange vio.h to avoid forward references. vio.h only needs
struct device_node from prom.h so remove the include and just
declare it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:23:47 +10:00
Jeff Garzik
502c7f1dd5 Merge /spare/repo/linux-2.6/ 2005-08-29 19:06:29 -04:00
Jeff Garzik
70d374ea99 Merge /spare/repo/linux-2.6/ 2005-08-29 15:59:42 -04:00
Jeff Garzik
aa7e16d6b8 [libata sata_nv] NVIDIA ok'd license change from OSL+GPL to GPL 2005-08-29 15:12:56 -04:00
Linus Torvalds
5be1d85c20 Merge refs/heads/upstream from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-08-29 10:03:46 -07:00
Jeff Garzik
2cba582a49 [libata sata_promise] Do not attempt to use SATA phy on PATA controllers 2005-08-29 05:12:30 -04:00
Jeff Garzik
af36d7f0df [libata] license change, other bits
- changes license of all code from OSL+GPL to plain ole GPL
  - except for NVIDIA, who hasn't yet responded about sata_nv
  - copyright holders were already contacted privately

- adds info in each driver about where hardware/protocol docs may be
  obtained

- where I have made major contributions, updated copyright dates
2005-08-28 20:18:39 -04:00
Jan Blunck
729d70f5df [PATCH] sg.c: fix a memory leak in devices seq_file implementation
I know that scsi procfs is legacy code but this is a fix for a memory leak.

While reading through sg.c I realized that the implementation of
/proc/scsi/sg/devices with seq_file is leaking memory due to freeing the
pointer returned by the next() iterator method.  Since next() might return
NULL or an error this is wrong.  This patch fixes it through using the
seq_files private field for holding the reference to the iterator object.

Here is a small bash script to trigger the leak. Use slabtop to watch
the size-32 usage grow and grow.

#!/bin/sh

while true; do
	cat /proc/scsi/sg/devices > /dev/null
done

Signed-off-by: Jan Blunck <j.blunck@tu-harburg.de>
Acked-by: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-27 11:22:27 -07:00
Jeff Garzik
135932651f [libata scsi] fix read/write translation edge cases
Fix bugs for unlikely edge cases noticed by Douglas Gilbert:

- When READ(6)/WRITE(6) sector count == 0, treat it as 256 sectors

- For other READ(x)/WRITE(x), when sector count == 0, error.
  We don't support successfully completing zero-length transfers at
  this time.
2005-08-27 04:20:12 -04:00
Jeff Garzik
d18d36b4ed libata: fix a few alan-isms 2005-08-27 04:13:52 -04:00
Jeff Garzik
953d1137fc [libata sata_sil] list documentation URL, since its public 2005-08-26 19:46:24 -04:00
Alan Cox
b73fc89f6d [PATCH] libata: regularize dma_start/stop arguments
Needed for a few PATA drivers.

Also fix up a wrong comment.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-26 17:36:26 -04:00
Alan Cox
31433ea369 [PATCH] libata: typo
You spelt heuristic wrongly. Also reformatted to 80 columns,
ignore the diff and fix the typo if you prefer that.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-26 17:36:25 -04:00
Jeff Garzik
b8f6153ee4 libata: fix EH locking
Wrap ata_qc_complete() calls in EH context in spinlocks, to prevent
races (mainly in ATAPI code paths).
2005-08-25 22:01:20 -04:00
Jeff Garzik
617e44fdfd Merge /spare/repo/linux-2.6/ 2005-08-24 00:55:22 -04:00
Linus Torvalds
005940ead6 Merge head 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-08-23 20:00:17 -07:00
Al Viro
fa53bb650e [PATCH] Kconfig fix (non-modular SCSI drivers)
non-modular scsi drivers depend on built-in scsi

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:46 -07:00
Al Viro
a838e543db [PATCH] Kconfig fix (acornscsi)
acornscsi had been broken for a long time; marked as such

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:42 -07:00
Jeff Garzik
4887f76ec3 /spare/repo/libata-dev branch 'upstream-fixes' 2005-08-23 03:35:44 -04:00
Jeff Garzik
6885433c25 libata: release prep (bump versions, etc.)
- bump versions where necessary
- remove two duplicated+outdated doc comments
- add MODULE_VERSION() to AHCI driver
2005-08-23 02:53:51 -04:00
Jeff Garzik
1410b0a7ad Merge /spare/repo/linux-2.6/ 2005-08-23 01:07:10 -04:00
Tejun Heo
e4deec6304 [PATCH] sil: apply M15W quirk selectively (take 2)
As SII reports that only original 3112's are affected by M15W quirk,
This patch adds SIL_FLAG_MOD15WRITE to selectively apply M15W quirk
depending on chipsets.  As of yet, we don't know exactly which PCI IDs
are for original 3112, so M15W quirk is applied to all except for 3512
and 3124.  Once more info is avaliable, we can change some of these
sil_3112_m15w's to sil_3112.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23 01:05:55 -04:00
Tejun Heo
40e8c82c74 [PATCH] libata: implement ata_poll_qc_complete and use it in polling functions
[PATCH libata-dev-2.6:upstream] implement ata_poll_qc_complete and use it in polling functions

 Previously, libata polling functions turned irq back on and completed
qc commands without holding host lock.  This creates a race condition
between the polling task and interrupts from other ports on the same
host set or spurious interrupt from itself.

 This patch implements ata_poll_qc_complete which enables irq and
completes qc atomically and convert all polling functions.

 Note: atapi_packet_task() didn't use to turn irq back on or clear
ATA_FLAG_NOINTR on error exits.  This patch makes it use
ata_poll_qc_complete which does both.

 Note: With this change, ALL invocations of ata_qc_complete() are now
done under host_set lock.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23 01:05:55 -04:00
Tejun Heo
c138950371 [PATCH] fix atapi_packet_task vs. intr race (take 2)
Interrupts from devices sharing the same IRQ could cause
ata_host_intr to finish commands being processed by atapi_packet_task
if the commands are using ATA_PROT_ATAPI_NODATA or ATA_PROT_ATAPI_DMA
protocol.  This is because libata interrupt handler is unaware that
interrupts are not expected during that period.  This patch adds
ATA_FLAG_NOINTR flag to tell the interrupt handler that we're not
expecting interrupts.

 Note that once proper HSM is implemented for interrupt-driven PIO,
this should be merged into it and this flag will be removed.

 ahci.c is a different kind of beast, so it's left alone.

* The following drivers use ata_qc_issue_prot and ata_interrupt, so
  changes in libata core will do.

  ata_piix sata_sil sata_svw sata_via sata_sis sata_uli

* The following drivers use ata_qc_issue_prot and custom intr handler.
  They need this change to work correctly.

  sata_nv sata_vsc

* The following drivers use custom issue function and intr handler.
  Currently all custom issue functions don't support ATAPI, so this
  change is irrelevant, updated for consistency and to avoid later
  mistakes.

  sata_promise sata_qstor sata_sx4

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23 01:05:55 -04:00
Martin Wilck
c0b34ad295 [PATCH] Fix HD activity LED with ahci
Patch: fix wrong HD activity control by ahci driver

The ahci driver 1.0 sets the SActive bit on every transaction,
causing the LED to light up. The SActive bit is used only for
native command queuing (NCQ) which the current driver version
doesn't implement. Resetting the SActive bit is the device's
responsibility (by sending a "Set Device Bits FIS" to the
host adapter) but this is not required in response to
non-NCQ commands, and (most) devices don't. Thus the LED
stays always on. This patch fixes the LED behavior.

Spec references:
http://www.intel.com/technology/serialata/pdf/rev1_1.pdf, sec. 3.3.13, 5.5.1
http://www.serialata.org/docs/serialata10a.pdf
http://www.intel.com/design/storage/papers/25266401.pdf

Signed-off-by: Martin.Wilck@fujitsu-siemens.com
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23 01:03:39 -04:00
Daniel Drake
9309049544 [PATCH] sata_promise: Add PDC40519 id
The Promise TX4200 is a 4-port SATA controller based on the PDC40519 chip. It
meets the description of the 20319, so just a simple ID needs to be added to
support this hardware. Thanks to Martin Povolný for testing.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23 01:03:39 -04:00
Otto Meier
08b791c02b [PATCH] sata_promise: Add PDC40718 id
Otto Meier recently submitted a patch to support the PDC40718 chip (marketed
as SATA300 TX4, a 4-port SATA controller).

Signed-off-by: Otto Meier <gf435@gmx.net>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23 01:03:39 -04:00
Albert Lee
3f3791d300 [PATCH] libata: Clear ATA_QCFLAG_ACTIVE flag before calling the completion callback
Description:
  After calling the completion callback, the libata error handler might be
running and getting atapi sense data. Clearing the ATA_QCFLAG_ACTIVE flag
at this point might interfere with the libata error handler.

Changes:
   - Clear the ATA_QCFLAG_ACTIVE flag before calling the completion callback
     (and also before the error handler)
   - Add some comment

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23 01:03:38 -04:00
Jeff Garzik
443d089703 /spare/repo/libata-dev branch 'upstream-fixes' 2005-08-23 00:59:54 -04:00
Linus Torvalds
b4b08e581f Revert "dc395x: Fix support for highmem"
It introduces a repeatable oops in the driver, which is a bigger problem
than the patch tries to solve. From the original description:

    Author: Jamie Lenehan <lenehan@twibble.org>
    Date:   Thu Mar 3 14:41:40 2005 +0200

    [PATCH] dc395x: Fix support for highmem

    From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

    Removes the page_to_virt and maps sg lists dynamically.
    This makes the driver work with highmem pages.

    Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
    Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
    Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-14 15:43:39 -07:00
Albert Lee
563a6e1fb0 [PATCH] libata handle the case when device returns/needs extra data
PATCH 2/2:  handle the case when device returns/needs extra data

Description:
   Sometimes the device returns/needs extra data than expected.

Changes:
   Modify __atapi_pio_bytes() to handle the case where device returns/needs extra data.
     - for read case, discard trailing data from the device
     - for write case, padding zero data to the device

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-12 02:44:20 -04:00
Albert Lee
6ae4cfb571 [PATCH] libata ata_data_xfer() fix
PATCH 1/2: ata_data_xfer() fix

Changes:
   - Modify ata_mmio_data_xfer() and ata_pio_data_xfer() to handle odd-lengthed buffer.
   - Add some function comments

This patch does not reuse ap->pad as alignment buffer since
using local variable seems good enough.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-12 02:44:20 -04:00
Douglas Gilbert
972dcafb6d [libata scsi] add START STOP UNIT translation 2005-08-11 03:35:53 -04:00
Jeff Garzik
4c71812261 Merge /spare/repo/linux-2.6/ 2005-08-11 03:33:08 -04:00
Linus Torvalds
0893dd327f Merge head 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-08-10 11:56:19 -07:00
Jason Gaston
3db368f71a [PATCH] ahci: AHCI mode SATA patch for Intel ICH7-M DH
Hello,

This patch adds the Intel ICH7-M DH DID to the ahci.c file for AHCI mode SATA support.  This patch was built against the 2.6.13-rc6 kernel.  
If acceptable, please apply.

Thanks,

Jason Gaston

Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-10 13:43:15 -04:00
Jeff Garzik
a7144b23da Merge /spare/repo/linux-2.6/ 2005-08-10 13:43:09 -04:00
Tejun Heo
42517438f9 libata: fix EH-related lockup by properly cleaning EH command list
Yet another hack due to the fact that libata is the only user of SCSI's
->eh_strategy_handler() hook.
2005-08-10 13:38:27 -04:00
Tejun Heo
fae009847c [PATCH] sata: fix sata_sx4 dma_prep to not use sg->length
sata_sx4 directly references sg->length to calculate total_len in
pdc20621_dma_prep().  This is incorrect as dma_map_sg() could have
merged multiple sg's into one and, in such case, sg->length doesn't
reflect true size of the entry.  This patch makes it use
sg_dma_len(sg).

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-10 13:34:58 -04:00
Salyzyn, Mark
5bb8345db8 [SCSI] dpt_i2o pci_request_regions fix
Originally From: Andrew Morton <akpm@osdl.org>

Altered By: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>

There is an additional 'build fix' patch that Andrew Morton submitted on
the kernel list (I have changed out his dpr_i2o with dpt_i2o below
though).

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-09 12:09:53 -05:00
James.Smart@Emulex.Com
5c44cd2afa [SCSI] fix target scanning oops with fc transport class
We have some nasty issues with 2.6.12-rc6. Any request to scan on
the lpfc or qla2xxx FC adapters will oops. What is happening is the
system is defaulting to non-transport registered targets, which
inherit the parent of the scan. On this second scan, performed by
the attribute, the parent becomes the shost instead of the rport.
The slave functions in the 2 FC adapters use starget_to_rport()
routines, which incorrectly map the shost as an rport pointer.

Additionally, this pointed out other weaknesses:
- If the target structure is torn down outside of the transport,
  we have no method for it to be regenerated at the proper parent.
- We have race conditions on the target being allocated by both
  the midlayer scan (parent=shost) and by the fc transport
  (parent=rport).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08 17:14:55 -05:00
James Bottomley
9c472dd919 [SCSI] Bug 4940 Repeatable Kernel Panic on Adaptec 2015S I20 device on bootup
From: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>

Prevent driver from loading if another driver (i2o) has already claimed
the resources associated with the card. Discussion associated with this
bug can be referenced at http://bugzilla.kernel.org/show_bug.cgi?id=4940
where it was agreed to use pci_request_regions in both the dpt_i2o and
the i2o driver to prevent both drivers loading on the same adapter(s).

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>

Rejections fixed up and

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08 11:51:38 -05:00
Linus Torvalds
6fb0caa423 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-08-04 13:08:29 -07:00
James Bottomley
fdd0edf2ac [SCSI] fix aic7xxx performance issues since 2.6.12-rc2
Several people noticed we dropped quite a bit on benchmark figures.
OK, it was my fault but unfortunately I discovered I ran out of brown
paper bags a while ago and forgot to reorder them.

The issue is that a construct introduced in the conversion of the
driver to use the transport class keyed off whether the block request
was tagged or not.  However, the aic7xxx driver doesn't properly set
up the block layer TCQ (it uses the wrong API), so the driver now
things all requests are untagged and we keep it to a queue depth of a
single element.  Oops.

The fix is to use the correct TCQ API.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04 13:38:59 -05:00
James Bottomley
84e66ee7ec [SCSI] aic7xxx: final fixes for DT handling
The aic7xxx can support Data Group transfers at periods > 12.5, so
eliminate that restriction.  Additionally wide is a requirement for DT
so ensure wide is set if users request DT.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-02 10:50:51 -05:00
Olaf Hering
f7c80c9f77 [PATCH] aic byteorder fixes after recent cleanup
Rebuild the aic7xxx firmware doesn't work anymore after this change
which appeared int 2.6.13-rc1:

   [SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft

Two files did not include byteorder.h, resulting in aic dying with a panic

	"Unknown opcode encountered in seq program"

This fixes it for me.

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-02 08:43:59 -07:00