Commit Graph

543 Commits

Author SHA1 Message Date
Rafael J. Wysocki
b0cb1a19d0 Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:45:38 -07:00
Linus Torvalds
7b5573769f Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected
  Blackfin arch: add BF54x I2C/TWI TWI0 driver support
  Blackfin On-Chip RTC driver update for supporting BF54x
  Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails)
  Blackfin arch: add error message when IRQ no available
  Blackfin arch: Initialize the exception vectors early in the boot process
  Blackfin arch: fix a compiling warning about dma-mapping
  Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere
  Blackfin arch: fix bug which unaligns the init thread's stack and causes the current macro to fail.
  Blackfin arch: Load P0 before storing through it
  Blackfin arch: fix KGDB bug, dont forget last parameter.
  Blackfin arch: add selections for BF544 and BF542
  Blackfin arch: use bfin_read_SWRST() now that BF561 provides it
  Blackfin arch: setup aliases for some core Core A MMRs
2007-07-28 19:33:04 -07:00
Andrew Morton
f52e0ef47b i2c: ds1682 warning fix
ia64:

drivers/i2c/chips/ds1682.c: In function `ds1682_show':
drivers/i2c/chips/ds1682.c:78: warning: long long unsigned int format, long unsigned int arg (arg 3)
drivers/i2c/chips/ds1682.c:78: warning: long long unsigned int format, long unsigned int arg (arg 3)

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
Bryan Wu
d8e715428f Blackfin arch: add BF54x I2C/TWI TWI0 driver support
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 16:58:03 +08:00
Linus Torvalds
40b42f1ebf Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits)
  i2c: Delete the i2c-isa pseudo bus driver
  hwmon: refuse to load abituguru driver on non-Abit boards
  hwmon: fix Abit Uguru3 driver detection on some motherboards
  hwmon/w83627ehf: Be quiet when no chip is found
  hwmon/w83627ehf: No need to initialize fan_min
  hwmon/w83627ehf: Export the thermal sensor types
  hwmon/w83627ehf: Enable VBAT monitoring
  hwmon/w83627ehf: Add support for the VID inputs
  hwmon/w83627ehf: Fix timing issues
  hwmon/w83627ehf: Add error messages for two error cases
  hwmon/w83627ehf: Convert to a platform driver
  hwmon/w83627ehf: Update the Kconfig entry
  make coretemp_device_remove() static
  hwmon: Add LM93 support
  hwmon: Improve the pwmN_enable documentation
  hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM
  hwmon: Add support for newer uGuru's
  hwmon/f71805f: Add temperature-tracking fan control mode
  hwmon/w83627ehf: Preserve speed reading when changing fan min
  hwmon: fix detection of abituguru volt inputs
  ...

Manual fixup of trivial conflict in MAINTAINERS file
2007-07-19 14:24:57 -07:00
Jean Delvare
e24b8cb4fa i2c: Delete the i2c-isa pseudo bus driver
There are no users of i2c-isa left, so we can finally get rid of it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19 14:25:20 -04:00
Tony Lindgren
0c4a59fed4 OMAP: add TI TWL92330/Menelaus Power Management chip driver
Add Texas Instruments TWL92330/Menelaus Power Management chip driver.  This
includes voltage regulators, Dual slot memory card tranceivers and
real-time clock(RTC).

The support for RTC is integrated with this driver only; it is not separate
module.  Passes 'rtctest' on OMAP H4 EVM, other than lack of "periodic"
(1/N second) IRQs.  System wakeup alarms (from suspend-to-RAM) work too.

The battery keeps the RTC active over power off, so once you set clock
(rdate/ntpdate/etc, then "hwclock -w") then RTC_HCTOSYS at boot time will
behave as expected.

Cc: "Jean Delvare" <khali@linux-fr.org>
Cc: "Tony Lindgren" <tony@atomide.com>
Cc: "David Brownell" <david-b@pacbell.net>
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:15 -07:00
Yoann Padioleau
5ee403f584 parse error, drivers/i2c/busses/i2c-pmcmsp.c
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Al Viro
2a9915c8a2 make i2c-acorn tristate
It depends on tristate I2C and it's trivial to make modular.  The
current Kconfig allows I2C=m, I2C_ACORN=y, which doesn't work at
all; alternatives are dependency on I2C=y and making I2C_ACORN
itself a tristate.  The latter is the right thing to do...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-15 16:40:52 -07:00
Al Viro
05bd711ea2 missing argument in bin_attribute ->read()/->write()
Fallout from commit 91a6902958 ('sysfs:
add parameter "struct bin_attribute *" ...')

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 16:40:52 -07:00
Linus Torvalds
21ba0f88ae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
2007-07-12 13:40:57 -07:00
Linus Torvalds
dc690d8ef8 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits)
  sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
  sysfs: make directory dentries and inodes reclaimable
  sysfs: implement sysfs_get_dentry()
  sysfs: move sysfs_drop_dentry() to dir.c and make it static
  sysfs: restructure add/remove paths and fix inode update
  sysfs: use sysfs_mutex to protect the sysfs_dirent tree
  sysfs: consolidate sysfs spinlocks
  sysfs: make kobj point to sysfs_dirent instead of dentry
  sysfs: implement sysfs_find_dirent() and sysfs_get_dirent()
  sysfs: implement SYSFS_FLAG_REMOVED flag
  sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags
  sysfs: make sysfs_drop_dentry() access inodes using ilookup()
  sysfs: Fix oops in sysfs_drop_dentry on x86_64
  sysfs: use singly-linked list for sysfs_dirent tree
  sysfs: slim down sysfs_dirent->s_active
  sysfs: move s_active functions to fs/sysfs/dir.c
  sysfs: fix root sysfs_dirent -> root dentry association
  sysfs: use iget_locked() instead of new_inode()
  sysfs: reorganize sysfs_new_indoe() and sysfs_create()
  sysfs: fix parent refcounting during rename and move
  ...
2007-07-12 13:40:20 -07:00
Jean Delvare
0a85e9a271 i2c-rpx: Remove
This driver has been broken forever. It depends on i2c-algo-8xx which
has never been in the mainline kernel.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:32 +02:00
Domen Puncer
254db9b5e7 i2c-mpc: work around missing-9th-clock-pulse bug
Work around a problem reported on:
http://ozlabs.org/pipermail/linuxppc-embedded/2005-July/019038.html
Without this patch I2C on mpc5200 becomes unusable after a while.
Tested on mpc5200 boards by Matthias Fechner and me.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:31 +02:00
Marc St-Jean
1b144df1d7 i2c: New PMC MSP71xx TWI bus driver
Add TWI driver for the PMC-Sierra MSP71xx devices.

[JD: Drop the probe hack, don't set algo_data as we never use it, return
the right error code if the driver registration fails.]

Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:31 +02:00
Jean Delvare
c6e16295b7 i2c-savage4: Delete many unused defines
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:31 +02:00
Jean Delvare
e296fb7f30 i2c/tsl2550: Speed up initialization
There's some redundancy in the tsl2550 initialization sequence. It is
powering up the device twice, and setting the operating mode twice
too. Setting things just once saves SMBus transactions, which aren't
always cheap, speeding up the device initialization.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>
2007-07-12 14:12:31 +02:00
Jean Delvare
b9cdad7488 i2c: New bus driver for the TAOS evaluation modules
This is a new I2C bus driver for the TAOS evaluation modules. Developped
and tested on the TAOS TSL2550 EVM.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:31 +02:00
Oleg Ryjkov
7edcb9abb5 i2c-i801: Use the internal 32-byte buffer on ICH4+
Add an ability to utilize the internal SRAM buffer on ICH4
and newer host controllers to speed up execution of block operations.

I've split the code so that it is more clear which block transaction is
performed.

First of all the host controller's type is identified. isich4 is set when
we think that the controller has the internal buffer. Then, before every
block transaction, if isich4 is set, we attempt to enable the E32B bit in
SMBAUXCTL register.

Signed-off-by: Oleg Ryjkov <olegr@google.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:31 +02:00
Oleg Ryjkov
ca8b9e32a1 i2c-i801: Various cleanups
* Use defines instead of raw numbers for register bits
* Fix several wrong indentations and trailing whitespace
* Move hwpec timeout checking to a separate function

Signed-off-by: Oleg Ryjkov <olegr@google.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:31 +02:00
Rodolfo Giometti
a92c344d8c i2c: Add support for the TSL2550
Add support for Taos TSL2550 ambient light sensors.
(http://www.taosinc.com/product_detail.asp?cateid=4&proid=18).

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:30 +02:00
Rodolfo Giometti
066af983c7 i2c-pxa: Support new-style I2C drivers
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:30 +02:00
Atsushi Nemoto
4d6ceed442 i2c-gpio: Make some internal functions static
i2c_gpio_getsda() and i2c_gpio_getscl() are only used in this file.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:30 +02:00
Atsushi Nemoto
7e69c3ac93 i2c-gpio: Add support for new-style clients
Use i2c_bit_add_numbered_bus() so that the i2c-gpio adapter works well
with new-style pre-declared devices.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:30 +02:00
Martin Michlmayr
757ba4c697 i2c-iop3xx: Switch to static adapter numbering
Update the IOP3xx I2C driver to use i2c_add_numbered_adapter(), so that
later patches can convert boards to using new-style drivers.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Voipio Riku <Riku.Voipio@movial.fi>
Cc: Dan J Williams <dan.j.williams@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:30 +02:00
Jean Delvare
7375cd822d i2c-sis5595: Resolve resource conflict with sis5595
Let the i2c-sis5595 driver release its PCI device after registering.
This is to allow the sis5595 hardware monitoring driver to also
access this PCI device. The same trick is already used in the
i2c-viapro and via686a drivers to let them both load.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:30 +02:00
Oleg Ryjkov
b53c82211a i2c-nforce2: Add support for SMBus block transactions
Add support for SMBus block read/write transactions to i2c-nforce2
driver, in particular to host controllers MCP51 and MCP55.

Signed-off-by: Oleg Ryjkov <olegr@google.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:29 +02:00
Grant Likely
1469fa2638 i2c-mpc: Use i2c_add_numbered_adapter
Move the i2c-mpc driver over to using the new i2c infrastructure.
Specifically, it now uses i2c_add_numbered_adapter so that the bus number
can be determined ahead of time and used to register i2c clients before
the bus is instantiated.

Tested on an MPC5200 based board

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:29 +02:00
Dale Farnsworth
65b22ad950 i2c-mv64xxx: Use i2c_add_numbered_adapter
Convert the Marvell mv64xxx I2C driver to use the new i2c infrastructure,
by calling i2c_add_numbered_adapter().  This allows clients to be
registered before the bus is instantiated.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:29 +02:00
Henry Su
c29c22218b i2c-piix4: Add support for the ATI SB700
Add the SMBus device ID for ATI SB700.

Signed-off-by: Henry Su <Henry.su@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:29 +02:00
Grant Likely
5162b75b24 i2c: New DS1682 chip driver
A driver for the Dallas DS1682 elapsed time recorder chip.

Tested on a MPC5200 based board using the integrated i2c adapter.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:29 +02:00
Jean Delvare
4b2643d7d9 i2c: Fix the i2c_smbus_read_i2c_block_data() prototype
Let the drivers specify how many bytes they want to read with
i2c_smbus_read_i2c_block_data(). So far, the block count was
hard-coded to I2C_SMBUS_BLOCK_MAX (32), which did not make much sense.
Many driver authors complained about this before, and I believe it's
about time to fix it. Right now, authors have to do technically stupid
things, such as individual byte reads or full-fledged I2C messaging,
to work around the problem. We do not want to encourage that.

I even found that some bus drivers (e.g. i2c-amd8111) already
implemented I2C block read the "right" way, that is, they didn't
follow the old, broken standard. The fact that it was never noticed
before just shows how little i2c_smbus_read_i2c_block_data() was used,
which isn't that surprising given how broken its prototype was so far.

There are some obvious compatiblity considerations:
* This changes the i2c_smbus_read_i2c_block_data() prototype. Users
  outside the kernel tree will notice at compilation time, and will
  have to update their code.
* User-space has access to i2c_smbus_xfer() directly using i2c-dev, so
  the changed expectations would affect tools such as i2cdump. In order
  to preserve binary compatibility, we give I2C_SMBUS_I2C_BLOCK_DATA
  a new numeric value, and define I2C_SMBUS_I2C_BLOCK_BROKEN with the
  old numeric value. When i2c-dev receives a transaction with the
  old value, it can convert it to the new format on the fly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:29 +02:00
Jean Delvare
ba7fbb723f i2c: Deprecate legacy RTC drivers
We have a new RTC subsystem with better drivers.

Legacy driver status:
* ds1337: The DS1337 and DS1339 are now supported by the rtc-ds1307
  driver, so it looks to me like we could even delete the ds1337
  driver right away.
* ds1374: Will soon be replaced with Scott Wood's rtc-ds1374 driver.
* m41t00: The M41T00 is supported by the rtc-ds1307 driver. For the
  M41T81 and M41T85, the rtc-m41t80 driver written by Atsushi Nemoto
  should work.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Acked-by: James Chapman <jchapman@katalix.com>
Cc: Randy Vinson <rvinson@mvista.com>
2007-07-12 14:12:29 +02:00
Matthias Kaehlcke
9d9c01ceff scx200_acb: Use mutex instead of semaphore
The scx200_acb driver use a semaphore as mutex.  Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:28 +02:00
David Brownell
d64f73be1b i2c: Add kernel documentation
Generate I2C kerneldoc; fix various glitches and add "context" sections to
that documentation.  Most I2C and SMBus functions still have no kerneldoc.

Let me suggest providing kerneldoc for all the i2c_smbus_*() functions as
a small and mostly self-contained project for anyone so inclined.  :)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:28 +02:00
Zhang Rui
91a6902958 sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
Well, first of all, I don't want to change so many files either.

What I do:
Adding a new parameter "struct bin_attribute *" in the
.read/.write methods for the sysfs binary attributes.

In fact, only the four lines change in fs/sysfs/bin.c and
include/linux/sysfs.h do the real work.
But I have to update all the files that use binary attributes
to make them compatible with the new .read and .write methods.
I'm not sure if I missed any. :(

Why I do this:
For a sysfs attribute, we can get a pointer pointing to the
struct attribute in the .show/.store method,
while we can't do this for the binary attributes.
I don't know why this is different, but this does make it not
so handy to use the binary attributes as the regular ones.
So I think this patch is reasonable. :)

Who benefits from it:
The patch that exposes ACPI tables in sysfs
requires such an improvement.
All the table binary attributes share the same .read method.
Parameter "struct bin_attribute *" is used to get
the table signature and instance number which are used to
distinguish different ACPI table binary attributes.

Without this parameter, we need to offer different .read methods
for different ACPI table binary attributes.
This is impossible as there are various ACPI tables on different
platforms, and we don't know what they are until they are loaded.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:09 -07:00
Tejun Heo
7b595756ec sysfs: kill unnecessary attribute->owner
sysfs is now completely out of driver/module lifetime game.  After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners.  Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.

This patch kills now unnecessary attribute->owner.  Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.

For more info regarding lifetime rule cleanup, please read the
following message.

  http://article.gmane.org/gmane.linux.kernel/510293

(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:06 -07:00
Auke Kok
44c10138fd PCI: Change all drivers to use pci_device->revision
Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.

This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.

In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.

Compile tested with make all{yes,mod}config on x86_64 and i386.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:10 -07:00
Enrico Scholz
6776f3d26a [ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator
Using lockdep validator causes warnings like

  INFO: trying to register non-static key.
  the code is fine but needs lockdep annotation.
  turning off the locking correctness validator.
  [<c00241a0>] (dump_stack+0x0/0x14) from [<c00520f8>] (__lock_acquire+0x150/0xc40)
  [<c0051fa8>] (__lock_acquire+0x0/0xc40) from [<c00530a0>] (lock_acquire+0x5c/0x70)
  [<c0053044>] (lock_acquire+0x0/0x70) from [<c01d9e44>] (_spin_lock_irq+0x48/0x58)
   r7:c07e5144 r6:00000000 r5:c015fb94 r4:c07e50b8
  [<c01d9dfc>] (_spin_lock_irq+0x0/0x58) from [<c015fb94>] (i2c_pxa_xfer+0x110/0x2e0)
   r5:c07e50b8 r4:0000001f

This is caused by memcpy'ing a statical initialized spin-lock. This patch
removes a static pxa_i2c structure which was used only as a source for this
memcpy() operation. Instead of, members and the spinlock will be
initialized manually.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-26 10:09:39 +01:00
Arnaud Patard
a1ba15832c i2c-s3c2410: Fix build warning
Fix for the following build warning:
  CC      drivers/i2c/busses/i2c-s3c2410.o
  drivers/i2c/busses/i2c-s3c2410.c: In function 's3c24xx_i2c_probe':
  drivers/i2c/busses/i2c-s3c2410.c:839: warning: format '%ld' expects type 'long int', but argument 4 has type 'resource_size_t'

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-22 19:49:16 +02:00
Jean Delvare
6a7ce82f02 i2c-tiny-usb: Fix truncated adapter name
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Till Harbaum <lists@harbaum.org>
2007-05-22 19:49:16 +02:00
David Brownell
de81d2aaeb i2c: Legacy i2c drivers shouldn't issue uevents
Prevent legacy drivers from issuing uevents for device creation/removal,
so that userspace can't cause modprobing loops for them.  This became a
problem for some legacy PC drivers.  I can't easily see it becoming an
issue with I2C legacy drivers, but consistency-in-paranoia seems likely
to be a good thing here.  For usable i2c-level driver model uevents, just
switch to a new-style driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-22 19:49:16 +02:00
Linus Torvalds
fc0b60f1dc Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] update default configuration.
  [S390] Kconfig: no wireless on s390.
  [S390] Kconfig: use common Kconfig files for s390.
  [S390] Kconfig: common config options for s390.
  [S390] Kconfig: unwanted menus for s390.
  [S390] Kconfig: menus with depends on HAS_IOMEM.
  [S390] Kconfig: refine depends statements.
  [S390] Avoid compile warning.
  [S390] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pci
  [S390] Avoid sparse warnings.
  [S390] dasd: Fix modular build.
  [S390] monreader inlining cleanup.
  [S390] cio: Make some structures and a function static.
  [S390] cio: Get rid of _ccw_device_get_device_number().
  [S390] fix subsystem removal fallout
2007-05-10 11:50:51 -07:00
Alexey Dobriyan
c91e23c63f i2c-at91: compile fix (IS_ERR)
CC      drivers/i2c/busses/i2c-at91.o
drivers/i2c/busses/i2c-at91.c: In function 'at91_i2c_probe':
drivers/i2c/busses/i2c-at91.c:213: warning: implicit declaration of function 'IS_ERR'

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
David Brownell
6e99806ebb i2c-at91 supports new-style i2c drivers
Make i2c-at91 register as i2c adapter zero (none of these chips seem to
have more than one TWI controllers) to let it kick in any board-specific
device declarations; also make it hotplug/coldplug.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
Russell King
0cfe61e1a7 arm: fix i2c-pxa build
From commit 7d054817b7:
> According to the PXA27x developer's manual, we shall do so.

We shall also at least compile test our changes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
Martin Schwidefsky
e25df1205f [S390] Kconfig: menus with depends on HAS_IOMEM.
Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Rafael J. Wysocki
a3d25c275d PM: Separate hibernation code from suspend code
[ With Johannes Berg <johannes@sipsolutions.net> ]

Separate the hibernation (aka suspend to disk code) from the other suspend
code.  In particular:

 * Remove the definitions related to hibernation from include/linux/pm.h
 * Introduce struct hibernation_ops and a new hibernate() function to hibernate
   the system, defined in include/linux/suspend.h
 * Separate suspend code in kernel/power/main.c from hibernation-related code
   in kernel/power/disk.c and kernel/power/user.c (with the help of
   hibernation_ops)
 * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:48 -07:00
Randy Dunlap
e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
David Brownell
da67529642 layered parport code uses parport->dev
Update some of the layered parport_driver code to use parport->dev:

	- i2c-parport (parent of i2c_adapter)
	- spi_butterfly (parent of spi_master, allowing cruft removal)
	- lp (creating class_device)
	- ppdev (parent of parportN device)
	- tipar (creating class_device)

There are still drivers that should be updated, like some of the input
drivers; but they won't be any worse off than they are today.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:05 -07:00
Johannes Berg
ab3bfca7ab remove software_suspend()
Remove software_suspend() and all its users since
pm_suspend(PM_SUSPEND_DISK) should be equivalent and there's no point in
having two interfaces for the same thing.

The patch also changes the valid_state function to return 0 (false) for
PM_SUSPEND_DISK when SOFTWARE_SUSPEND is not configured instead of
accepting it and having the whole thing fail later.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:59 -07:00
Linus Torvalds
c6799ade4a Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
  [ARM] Add comments marking in-use ptrace numbers
  [ARM] Move syscall saving out of the way of utrace
  [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
  [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
  [ARM] mm 10: allow memory type to be specified with ioremap
  [ARM] mm 9: add additional device memory types
  [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
  [ARM] iop: add missing parens in macro
  [ARM] mm 7: remove duplicated __ioremap() prototypes
  ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
  ARM: OMAP: MPUIO wake updates
  ARM: OMAP: speed up gpio irq handling
  ARM: OMAP: plat-omap changes for 2430 SDP
  ARM: OMAP: gpio object shrinkage, cleanup
  ARM: OMAP: /sys/kernel/debug/omap_gpio
  ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
  ARM: OMAP: Enable 24xx GPIO autoidling
  [ARM] 4318/2: DSM-G600 Board Support
  [ARM] 4227/1: minor head.S fixups
  [ARM] 4328/1: Move i.MX UART regs to driver
  ...
2007-05-06 13:20:10 -07:00
Linus Torvalds
89661adaae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (59 commits)
  PCI: Free resource files in error path of pci_create_sysfs_dev_files()
  pci-quirks: disable MSI on RS400-200 and RS480
  PCI hotplug: Use menuconfig objects
  PCI: ZT5550 CPCI Hotplug driver fix
  PCI: rpaphp: Remove semaphores
  PCI: rpaphp: Ensure more pcibios_add/pcibios_remove symmetry
  PCI: rpaphp: Use pcibios_remove_pci_devices() symmetrically
  PCI: rpaphp: Document is_php_dn()
  PCI: rpaphp: Document find_php_slot()
  PCI: rpaphp: Rename rpaphp_register_pci_slot() to rpaphp_enable_slot()
  PCI: rpaphp: refactor tail call to rpaphp_register_slot()
  PCI: rpaphp: remove rpaphp_set_attention_status()
  PCI: rpaphp: remove print_slot_pci_funcs()
  PCI: rpaphp: Remove setup_pci_slot()
  PCI: rpaphp: remove a call that does nothing but a pointer lookup
  PCI: rpaphp: Remove another wrappered function
  PCI: rpaphp: Remve another call that is a wrapper
  PCI: rpaphp: remove a function that does nothing but wrap debug printks
  PCI: rpaphp: Remove un-needed goto
  PCI: rpaphp: Fix a memleak; slot->location string was never freed
  ...
2007-05-04 18:04:29 -07:00
Jean Delvare
6473d160b4 PCI: Cleanup the includes of <linux/pci.h>
I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:35 -07:00
Ben Dooks
5b68790cd5 i2c-s3c2410: Fix bug in releasing driver
When compiled as a module, the i2c-s3c2410 driver does not
free either the IRQ or the i2c adapter it attached to the system.

As part of this fix, move to the usual kernel style
of freeing items as part of the probe error path
making the remove process easier.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:35 +02:00
Ben Dooks
e00a8cdf32 i2c-s3c2410: Fix I2C SDA to SCL setup time
Fix the setup time for SDA to SCL due to the way
the S3C24XX I2C controller works.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:35 +02:00
Till Harbaum
e8c76eed2e i2c: New i2c-tiny-usb bus driver
Add a driver for the i2c-tiny-usb interface. This is a simple
do-it-yourself USB to I2C interface targeted at experimental and
home use. See the i2c-tiny-usb homepage for hardware details:
http://www.harbaum.org/till/i2c_tiny_usb

Signed-off-by: Till Harbaum <till@harbaum.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:35 +02:00
Milind Arun Choudhary
35532d2003 i2c: SPIN_LOCK_UNLOCKED cleanup
SPIN_LOCK_UNLOCKED cleanup, use __SPIN_LOCK_UNLOCKED instead.

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:34 +02:00
Jean Delvare
11de70bd4d i2c: Obsolete i2c-ixp2000, i2c-ixp4xx and scx200_i2c
The new generic i2c-gpio driver should be used instead.
The obsolete drivers will be removed in September 2007.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
2007-05-01 23:26:34 +02:00
Ben Dooks
bcda9f1eb0 i2c: New Simtec I2C bus driver
Platform driver for the Simtec CPLD based simple I2C logic.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:34 +02:00
Haavard Skinnemoen
1c23af90dc i2c: Bitbanging I2C bus driver using the GPIO API
This is a very simple bitbanging I2C bus driver utilizing the new
arch-neutral GPIO API. Useful for chips that don't have a built-in
I2C controller, additional I2C busses, or testing purposes.

To use, include something similar to the following in the
board-specific setup code:

  #include <linux/i2c-gpio.h>

  static struct i2c_gpio_platform_data i2c_gpio_data = {
	.sda_pin	= GPIO_PIN_FOO,
	.scl_pin	= GPIO_PIN_BAR,
  };
  static struct platform_device i2c_gpio_device = {
	.name		= "i2c-gpio",
	.id		= 0,
	.dev		= {
		.platform_data	= &i2c_gpio_data,
	},
  };

Register this platform_device, set up the I2C pins as GPIO if
required and you're ready to go. This will use default values for
udelay and timeout, and will work with GPIO hardware that does not
support open drain mode, but allows sensing of the SDA and SCL lines
even when they are being driven.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:34 +02:00
Jan Engelhardt
16538e6b32 Use menuconfig objects - I2C
Allow the whole I2C menu to be disabled at once without diving into
the submenus for deselecting all options (should the user desire so).

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:34 +02:00
Jean Delvare
b86a1bc8e3 i2c: Restore i2c_smbus_read_block_data
Add back the i2c_smbus_read_block_data helper function, it is needed
by the upcoming lm93 hardware monitoring driver and possibly others.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:34 +02:00
Jean Delvare
7d054817b7 i2c-pxa: Clean transaction stop
It was reported to me that the i2c-pxa driver was not able to process
more that 50 transactions per second. Investigation revealed that the
I2C unit was busy for 20 ms after every transaction. The reason seems
to be that we forget to clear the STOP and ACKNACK bits at the end of
the transaction. According to the PXA27x developer's manual, we shall
do so.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Nicolas Pitre <nico@cam.org>
2007-05-01 23:26:33 +02:00
Jean Delvare
494dbb64dc i2c-algo-bit: Improve debugging
Improve the debugging features of the i2c-algo-bit driver:
* Make it possible to compile the driver without debugging support
  at all, making it much smaller.
* Use dev_dbg() for debugging messages where possible, and dev_err()
  for error messages.
* Remove redundant debugging messages.

These changes allowed for minor code cleanups, which are included
as well.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:33 +02:00
Jean Delvare
424ed67c7d i2c-algo-bit: Implement a 50/50 SCL duty cycle
The original i2c-algo-bit implementation uses a 33/66 SCL duty cycle
when bits are being written on the bus. While the I2C specification
doesn't forbid it, this prevents us from driving the I2C bus to its
max speed, limiting us to 66 kbps max on standard I2C busses.

Implementing a 50/50 duty cycle instead lets us max out the bandwidth
up to the theoretical max of 100 kbps on standard I2C busses. This is
particularly important when large amounts of data need to be transfered
over the bus, as is the case with some TV adapters when the firmware is
being uploaded.

In fact this change even allows, at least in theory, fast-mode I2C
support at 125, 166 and 250 kbps. There's no way to reach the
theoretical max of 400 kbps with this implementation. But I don't
think we want to put efforts in that direction anyway: software-driven
I2C is very CPU-intensive and bad for latency.

Other timing changes:
* Don't set SDA high explicitly on error, we're going to issue a stop
  condition before we leave anyway.
* If an error occurs when sending the slave address, yield the CPU
  before retrying, and remove the additional delay after the new start
  condition.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:33 +02:00
David Brownell
7c17549982 i2c-omap: Switch to static adapter numbering
Update the OMAP I2C driver to use i2c_add_numbered_adapter(), so that
later patches can convert boards to using new-style drivers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:32 +02:00
Bryan Wu
d24ecfcc39 i2c: Blackfin Two Wire Interface driver
The i2c linux driver for blackfin architecture which supports blackfin
on-chip TWI controller i2c operation.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:32 +02:00
Ladislav Michl
6edac5803f i2c-algo-sgi: Comment and whitespace cleanups
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:32 +02:00
Jean Delvare
b3e820968a i2c: Make i2c_del_driver a void function
Make i2c_del_driver a void function, like all other driver removal
functions. It always returned 0 even when errors occured, and nobody
ever actually checked the return value anyway. And we cannot fail
a module removal anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:32 +02:00
Jean Delvare
a97f1ed090 i2c: Move i2c-isa-only exported symbol declarations
Move the declaration of i2c-isa-only exported symbols to i2c-isa
itself, that's the best way to ensure nobody will attempt to use them.
Hopefully we'll get rid of the exports themselves soon anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:32 +02:00
Jean Delvare
12b5053ac5 i2c: Add i2c_new_probed_device()
Add a new helper function to instantiate an i2c device. It is meant as a
replacement for i2c_new_device() when you don't know for sure at which
address your I2C/SMBus device lives. This happens frequently on TV
adapters for example, you know there is a tuner chip on the bus, but
depending on the exact board model and revision, it can live at different
addresses. So, the new i2c_new_probed_device() function will probe the bus
according to a list of addresses, and as soon as one of these addresses
responds, it will call i2c_new_device() on that one address.

This function will make it possible to port the old i2c drivers to the
new model quickly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:31 +02:00
Jean Delvare
0f3b483852 i2c-algo-bit: Add i2c_bit_add_numbered_bus
Add i2c_bit_add_numbered_bus(), which is equivalent to i2c_bit_add_bus
except that it calls i2c_add_numbered_adapter() at the end instead of
i2c_add_adapter().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:31 +02:00
David Brownell
c05646069c i2c: i2c EXPORT_SYMBOL cleanup
Make i2c-core.c obey Documentation/CodingStyle better by snugging
the EXPORT_SYMBOL declarations next to the relevant definitions.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:31 +02:00
David Brownell
6e13e64184 i2c: Add i2c_add_numbered_adapter()
This adds a call, i2c_add_numbered_adapter(), registering an I2C adapter
with a specific bus number and then creating I2C device nodes for any
pre-declared devices on that bus.  It builds on previous patches adding
I2C probe() and remove() support, and that pre-declaration of devices.

This completes the core support for "new style" I2C device drivers.
Those follow the standard driver model for binding devices to drivers
(using probe and remove methods) rather than a legacy model (where the
driver tries to autoconfigure each bus, and registers devices itself).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:31 +02:00
David Brownell
9c1600eda4 i2c: Add i2c_board_info and i2c_new_device()
This provides partial support for new-style I2C driver binding.  It builds
on "struct i2c_board_info" declarations that identify I2C devices on a given
board.  This is needed on systems with I2C devices that can't be fully probed
and/or autoconfigured, such as many embedded Linux configurations where the
way a given I2C device is wired may affect how it must be used.

There are two models for declaring such devices:

 * LATE -- using a public function i2c_new_device().  This lets modules
   declare I2C devices found *AFTER* a given I2C adapter becomes available.
   
   For example, a PCI card could create adapters giving access to utility
   chips on that card, and this would be used to associate those chips with
   those adapters.

 * EARLY -- from arch_initcall() level code, using a non-exported function
   i2c_register_board_info().  This copies the declarations *BEFORE* such
   an i2c_adapter becomes available, arranging that i2c_new_device() will
   be called later when i2c-core registers the relevant i2c_adapter.

   For example, arch/.../.../board-*.c files would declare the I2C devices
   along with their platform data, and I2C devices would behave much like
   PNPACPI devices.  (That is, both enumerate from board-specific tables.)

To match the exported i2c_new_device(), the previously-private function
i2c_unregister_device() is now exported.

Pending later patches using these new APIs, this is effectively a NOP.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:31 +02:00
David Brownell
a1d9e6e49f i2c: i2c stack can remove()
More update for new style driver support:  add a remove() method, and
use it in the relevant code paths.

Again, nothing will use this yet since there's nothing to create devices
feeding this infrastructure.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:30 +02:00
David Brownell
7b4fbc50fa i2c: i2c stack can probe()
One of a series of I2C infrastructure updates to support enumeration using
the standard Linux driver model.

This patch updates probe() and associated hotplug/coldplug support, but
not remove().  Nothing yet _uses_ it to create I2C devices, so those
hotplug/coldplug mechanisms will be the only externally visible change.
This patch will be an overall NOP since the I2C stack doesn't yet create
clients/devices except as part of binding them to legacy drivers.

Some code is moved earlier in the source code, helping group more of the
per-device infrastructure in one place and simplifying handling per-device
attributes.

Terminology being adopted:  "legacy drivers" create devices (i2c_client)
themselves, while "new style" ones follow the driver model (the i2c_client
is handed to the probe routine).  It's an either/or thing; the two models
don't mix, and drivers that try mixing them won't even be registered.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:30 +02:00
Jean Delvare
5cedb05db3 i2c-pca-isa: Port to the new device driver model
Port the i2c-pca-isa driver to the new device driver model. I'm
using Rene Herman's new isa bus type, as it fits the needs nicely. One
benefit is that we can now give a proper parent to our i2c adapter.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:30 +02:00
Jean Delvare
4a5d30302e i2c-elektor: Port to the new device driver model
Port the i2c-elektor driver to the new device driver model. I'm
using Rene Herman's new isa bus type, as it fits the needs nicely. One
benefit is that we can now give a proper parent to our i2c adapter.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:30 +02:00
Jean Delvare
c6e8bb2ca5 i2c-parport-light: Port to the new device driver model
Also fix a small race on driver unload: we need to unregister the
i2c adapter before we power it off.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:30 +02:00
Jean Delvare
3af07bd297 i2c-parport: Fix a minor race on driver unload
When unloading the driver, we really want to unregister the i2c adapter
before we power it off, rather than the other way around.

Also speed up the bus a bit when we can sense SCL. The slaves will
stretch the line as needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:30 +02:00
Jean Delvare
4b4686e7a6 scx200_acb: Fix PCI device reference count
The scx200_acb driver supports two kind of devices, PCI ones and ISA
ones. Even ISA ones are detected using the presence of a given PCI
device, and we get a reference to it, but never put it back, so we
have a leak. Fix it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:30 +02:00
Jean Delvare
f75803de6a i2c-nforce2: Add support for the MCP61 and MCP65
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans-Frieder Vogt <hfvogt@gmx.net>
2007-05-01 23:26:29 +02:00
Jean Delvare
cacf2269b6 i2c-parport: Optimize binary size
Initialize the fields of the i2c_adapter structure individually,
rather than copying a whole static template structure. This shaves
off 474 bytes or 14% (on i386) from the binary size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:29 +02:00
Jean Delvare
3c4bb241d3 i2c-algo-bit: Emulate SMBus block read
Now that i2c-core lets the i2c bus drivers emulate the SMBus block read
and SMBus block process call transaction types, let's implement that in
the popular i2c bit-banging driver. This will also act as a reference
implementation for other bus drivers which want to do the same.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:29 +02:00
Jean Delvare
209d27c3b1 i2c: Emulate SMBus block read over I2C
Let the I2C bus drivers emulate the SMBus Block Read and Block Process
Call transactions if they wish. This requires to define a new message
flag, which i2c-core will use to let the underlying I2C bus driver
know that the first received byte will specify the length of the read
message.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:29 +02:00
Jean Delvare
1ecac07aba i2c-algo-bit: Always send a stop condition before leaving
The i2c-algo-bit driver doesn't behave well on read errors: it'll
bail out without even sending a stop condition on the bus, so the bus
will be stuck. So make sure that we always send a stop condition on
the bus before we leave. The best way to make sure is to always send
it at the end of function bit_xfer.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:28 +02:00
David Brownell
ef2c8321f5 i2c: Rename dev_to_i2c_adapter()
Rename dev_to_i2c_adapter() as to_i2c_adapter(), since the previous
syntax was a surprising and needless difference from normal naming
conventions in Linux.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:28 +02:00
David Brownell
16ffadfc68 i2c: Class attribute cleanup
This patch is a minor cleanup/code shrink, using class infrastructure
in i2c-core to manage the i2c_adapter attribute.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:28 +02:00
David Brownell
2096b956d2 i2c: Shrink struct i2c_client
This shrinks the size of "struct i2c_client" by 40 bytes:

 - Substantially shrinks the string used to identify the chip type
 - The "flags" don't need to be so big
 - Removes some internal padding

It also adds kerneldoc for that struct, explaining how "name" is really a
chip type identifier; it's otherwise potentially confusing.

Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name
and for i2c_adapter.name, this needed to affect i2c_adapter too.  The
adapters which used that symbol now use the more-obviously-correct
idiom of taking the size of that field.

JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to
avoid wasting space in padding.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:28 +02:00
David Brownell
4ad4eac606 i2c: i2c_register_driver() cleanup
Minor cleanup in i2c_register_driver():  use list_for_each_entry().

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:28 +02:00
Jean Delvare
b31366f439 i2c: i2c_adapter devices need no driver
Kill i2c_adapter_driver as it doesn't make sense and it prevents
further i2c-core cleanups. i2c_adapter devices are virtual devices
(ex-class devices) and as such they don't need a driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:28 +02:00
Jean Delvare
fccb56e4d8 i2c: Kill i2c_adapter.class_dev
Kill i2c_adapter.class_dev. Instead, set the class of i2c_adapter.dev
to i2c_adapter_class, so that a symlink will be created for every
i2c_adapter in /sys/class/i2c-adapter.

The same change must be mirrored to i2c-isa as it duplicates some
of the i2c-core functionalities.

User-space tools and libraries might need some adjustments. In
particular, libsensors from lm_sensors 2.10.3 or later is required for
proper discovery of i2c adapter names after this change.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:27 +02:00
Eric Miao
7053acbd78 [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX
This patch removes the unnecessary bit number from CKENnn_XXXX
definitions for PXA, so that

	CKEN0_PWM0 --> CKEN_PWM0
	CKEN1_PWM1 --> CKEN_PWM1
	...
	CKEN24_CAMERA --> CKEN_CAMERA

The reasons for the change of these defitions are:

1. they do not scale - they are currently valid for pxa2xx, but
definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera
instead of bit 24

2. they are unnecessary - the peripheral name within the definition
has already announced its usage, we don't need those bit numbers
to know which peripheral we are going to enable/disable clock for

3. they are inconvenient - think about this: a driver programmer
for pxa has to remember which bit in the CKEN register to turn
on/off

Another change in the patch is to make the definitions equal to its
clock bit index, so that

   #define CKEN_CAMERA  (24)

instead of

   #define CKEN_CAMERA  (1 << 24)

this change, however, will add a run-time bit shift operation in
pxa_set_cken(), but the benefit of this change is that it scales
when bit index exceeds 32, e.g., pxa3xx has two registers CKENA
and CKENB, totally 64 bit for this, suppose CAMERA clock enabling
bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10)
and so that pxa_set_cken() need minimum change to adapt to that.

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 23:14:01 +01:00
Matej Kenda
a79220b763 [ARM] 4246/1: i2c-pxa: add adapter class to platform specific data
Reposted patch for kernel 2.6.21-rc2.

The driver i2c-pxa doesn't set the class member in i2c_adapter, which
is used to register the I2C adapter. The hwmon (sensors) drivers (e.g.
adm1021) that are connected to a i2c-pxa adapter don't attach because
they expect that the adapter supports class I2C_CLASS_HWMON.

This patch adds functionality to allow platforms to set the class and
pass it as platform_data to the i2c-pxa driver. Sample usage in
platform code:

static struct i2c_pxa_platform_data my_i2c_platform_data = {
	.class = I2C_CLASS_HWMON
};

static void __init my_platform_init(void)
{
	(void) platform_add_devices(devices, ARRAY_SIZE(devices));

	pxa_set_i2c_info(&my_i2c_platform_data);
}

Signed-off-by: Matej Kenda <matej.kenda@hermes-softlab.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 20:36:55 +01:00
Olof Johansson
080dfbe176 Minor bug fixes to i2c-pasemi
* Last write during i2c_xfer is of the wrong byte (off-by-1).
* Read length is wrong for some of the reads (mistakenly used the PEC
  version)

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17 16:36:28 -07:00
Jean Delvare
56a3b5ebee i2c-pasemi: Depend on PPC_PASEMI again
Looks like a local change I made to be able to test-compile the i2c-pasemi
driver leaked upstream.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17 16:36:28 -07:00
Cyrill V. Gorcunov
0ca9493b4c i2c/ds1374: Check workqueue creation status
Check if workqueue creation failed.  Further usage of NULL pointed
workqueue is not good I guess ;)

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-03-22 19:49:01 +01:00
Jean Delvare
a5aaea3785 i2c-i801: Restore the device state before leaving
Restore the original host configuration on driver unload and on
suspend. In particular this returns the SMBus master in I2C mode if it
was originally in I2C mode, which should help with suspend/resume if
the BIOS expects to find the SMBus master in I2C mode.

This fixes bug #6449 (for real this time.)
http://bugzilla.kernel.org/show_bug.cgi?id=6449

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Tommi Kyntola <tommi.kyntola@ray.fi>
2007-03-22 19:49:01 +01:00