Commit Graph

1273 Commits

Author SHA1 Message Date
Mark Brown
a2342ae325 ASoC: Factor out shared code from WM8993
The WM8993 analogue control is shared with other devices in the same
product line.  Since this is a very substantial proportion of the
driver move the definitions of these controls into a new wm_hubs module
which allows them to be shared between the two.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:31 +01:00
Mark Brown
e9ade7f933 ASoC: Minor cleanups to AD1938 driver
- Build in SND_SOC_ALL_CODECS.
- Remove null suspend/resume stuff.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 15:19:42 +01:00
Barry Song
7eaae41ea5 new ad1836 codec driver based on asoc
There has been an ad1836 driver in sound/blackfin based on traditional alsa.
The new driver is based on asoc. The architecture of ad1836 codec driver is
very much like ad1938.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 15:18:53 +01:00
Peter Ujfalusi
9008adf9a9 ASoC: TWL4030: Introduce PGAs for outputs
Dynamically control and control only the needed output amplifier
muting/un-muting.

The original code was muting and un-muting the following output
amplifiers: Earpiece PreDrivL/R, CarkitL/R at the same time
regardless which pin is actually in use at the given moment.

Move these as separate PGA so only the needed amplifier will be touched.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 14:56:13 +01:00
Barry Song
c4ff357ada ASoC: add output/input widgets in ad1938 to make dac/adc dynamic PM work
According to the function dapm_dac_check_power() in
sound/soc/soc-dapm.c, dac power can't be on/off stand-alone without any
output widget as sink. And according to dapm_adc_check_power(), adc
power can't be on/off stand-alone without any input widget as source. So
we can't only define some stand-alone SND_SOC_DAPM_DAC/SND_SOC_DAPM_ADC
to hope their power can be managed dynamically.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 10:47:22 +01:00
Mark Brown
d2a382143b ASoC: Update AD1938 for new TDM slot API
It's only actually paying attention to the slot count anyway.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-12 14:30:33 +01:00
Takashi Iwai
909a2607a5 Merge branch 'fix/asoc' into for-linus
* fix/asoc:
  ASoC: Add missing DRV_NAME definitions for fsl/* drivers
2009-08-12 08:05:19 +02:00
Mark Brown
e0026beac0 ASoC: Update WM9081 for tdm_slot() API change
Store the TDM slot width then if it's set use that rather than the
sample size to calculate BCLK. Leave imposing constraints to the
core (which should do this but doesn't yet) or machine driver.

Also allow 0 TDM slots to be configure (for use when disabling TDM).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-11 16:29:21 +01:00
Mark Brown
1921bab217 Merge commit 'a5479e389e989acfeca9c32eeb0083d086202280' into for-2.6.32 2009-08-11 13:09:27 +01:00
Randy Dunlap
17244c24f9 ASoC: fix I2C build errors
Fix soc build errors when I2C is built as a loadable module:

(.text+0x5d26b): undefined reference to `i2c_master_send'
soc-cache.c:(.text+0x5d32d): undefined reference to `i2c_transfer'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-11 10:47:25 +01:00
Mark Brown
e0c48a18f7 ASoC: Drop unneeded declaration of removed wm8731 SPI write function
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-10 12:59:29 +01:00
Mark Brown
35b1207b34 ASoC: Convert WM8776 to use factored out register cache code
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-08 10:37:33 +01:00
Chaithrika U S
7ae5945f0c ASoC: DaVinci: Support Audio on DA830 EVM
Add support for audio on DA830 EVM- here McASP1 is interfaced to
TLV320AIC3106 codec.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-08 09:12:54 +01:00
Uwe Kleine-König
dbe9ea6e79 ASoC: s3c2443-ac97: convert semaphore to mutex
This fixes a build failure for 2.6.31-rc4-rt1 (ARCH=arm, s3c2410_defconfig):

	  CC [M]  sound/soc/s3c24xx/s3c2443-ac97.o
	sound/soc/s3c24xx/s3c2443-ac97.c:50: warning: type defaults to 'int' in declaration of 'DECLARE_MUTEX'
	sound/soc/s3c24xx/s3c2443-ac97.c:50: warning: parameter names (without types) in function declaration
	sound/soc/s3c24xx/s3c2443-ac97.c: In function 's3c2443_ac97_read':
	sound/soc/s3c24xx/s3c2443-ac97.c:59: error: 'ac97_mutex' undeclared (first use in this function)
	sound/soc/s3c24xx/s3c2443-ac97.c:59: error: (Each undeclared identifier is reported only once
	sound/soc/s3c24xx/s3c2443-ac97.c:59: error: for each function it appears in.)
	sound/soc/s3c24xx/s3c2443-ac97.c: In function 's3c2443_ac97_write':
	sound/soc/s3c24xx/s3c2443-ac97.c:93: error: 'ac97_mutex' undeclared (first use in this function)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-08 08:50:13 +01:00
Takashi Iwai
afc5e65245 ASoC: Add missing DRV_NAME definitions for fsl/* drivers
Module builds are broken due to missing DRV_NAME for
efika-audio-fabric and pcm030-audio-fabric.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-07 16:33:53 +02:00
Janusz Krzysztofik
b7b8f9bf0c TTY/ASoC: Rename N_AMSDELTA line discipline to N_V253
The patch changes the line discipline name registered in include/linux/tty.h
and updates the ams-delta machine driver to use it.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 11:48:02 +01:00
Mark Brown
06cddefc1f Merge branch 'reg-cache' into for-2.6.32 2009-08-07 11:43:58 +01:00
Mark Brown
b9b5cc26d0 Merge branch 'for-2.6.31' into for-2.6.32 2009-08-07 11:42:01 +01:00
Troy Kisky
6a90d536fe ASoC: DaVinci: pcm, constrain buffer size to multiple of period
The dma setup code assumes that the buffer size is a multiple
of the period size.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 11:38:29 +01:00
Troy Kisky
9bb7415056 ASoC: DaVinci: i2s: don't bounce through rtd to get dai
dai is a parameter to the functions, so use it instead of
looking it up.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 11:38:29 +01:00
Jarkko Nikula
c12abc012e ARM: OMAP: McBSP: Fix ASoC on OMAP1510 by fixing API of omap_mcbsp_start/stop
Simultaneous audio playback and capture on OMAP1510 can cause that second
stream is stalled if there is enough delay between startup of the audio
streams.

Current implementation of the omap_mcbsp_start is starting both transmitter
and receiver at the same time and it is called only for firstly started
audio stream from the OMAP McBSP based ASoC DAI driver.

Since DMA request lines on OMAP1510 are edge sensitive, the DMA request is
missed if there is no DMA transfer set up at that time when the first word
after McBSP startup is transmitted. The problem hasn't noted before since
later OMAPs are using level sensitive DMA request lines.

Fix the problem by changing API of omap_mcbsp_start and omap_mcbsp_stop by
allowing to start and stop individually McBSP transmitter and receiver
logics. Then call those functions individually for both audio playback
and capture streams. This ensures that DMA transfer is setup before
transmitter or receiver is started.

Thanks to Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> for detailed problem
analysis and Peter Ujfalusi <peter.ujfalusi@nokia.com> for info about DMA
request line behavior differences between the OMAP generations.

Reported-and-tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 10:57:42 +01:00
Daniel Ribeiro
a5479e389e ASoC: change set_tdm_slot api to allow slot_width override.
Extend set_tdm_slot to allow the user to arbitrarily set the frame width
and active TX/RX slots.

Updates magician.c and wm9081.c for the new set_tdm_slot(). wm9081.c
still doesn't handle the slot_width override.

While being there, correct an incorrect use of SlotsPerFrm(7) use in
bitmask on pxa-ssp.c (SSCR0_SlotsPerFrm(x) is (((x) - 1) << 24)) ).

(this series is meant for Mark's for-2.6.32 branch)

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-06 15:52:24 +01:00
Janusz Krzysztofik
9029bb316b ASoC: CX20442: simplify codec controller usage
This patch is a workaround for the problem of several subsequent control
statements not being applied correctly to the codec controller (modem).

In order to follow the hook switch state change from handset to handsfree
while
in full duplex mode, two consecutive +VLS control commands were sent to the
modem. The first one was M1 (microphone only), the seconds one was M1S1 (both
microphone and speaker). As there was no real modem handshaking procedure
implemented, neither in the codec nor in the machine driver part of the line
discipline, the modem was having the second command missed.

Since a possibility to switch to microphone only mode (and speaker only mode
as well) seams of no value, I have modified the code to issue single M1S1
command only for any of those cases.

Tested on my Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-06 11:36:46 +01:00
Janusz Krzysztofik
4977b03e3d ASoC: CX20442: add some debugging
This patch adds debugging statement that can help in tracing
how the driver is trying to control the codec device.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-06 11:36:45 +01:00
Mark Brown
924914ee95 ASoC: Add WM8776 CODEC driver
The WM8776 is a high performance, stereo audio CODEC with five channel
input selector. The WM8776 is ideal for surround sound processing
applications for home hi-fi, DVD-RW and other audio visual equipment.

This driver implements support for most WM8776 features - currently the
ADC automatic level control/limiter functionality is omitted.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-06 11:36:45 +01:00
javier Martin
fbb474deda ASoC: Fix review issues in i.MX2x PCM driver
Signed-off-by: javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05 22:31:55 +01:00
javier Martin
2ccafed43a ASoC: add machine driver for i.mx27_visstrim_m10 board
This adds support for i.mx27_visstrim_sm10 board machine driver which
uses an i.mx27 processor plus a wm8974 codec.

It has been tested on a visstrim_sm10 board.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05 22:31:54 +01:00
javier Martin
9d8bc2968c ASoC: add DAI platform ssi driver for MXC
This adds support for DAI platform for the SSI present in MXC platforms.

It currently does not support i.MX3, the only thing necessary to do
this is to export DMA data for i.MX3 interface which I haven't done
because I don't have a i.MX3 based board available.

It has been tested on i.MX27 board.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05 22:31:54 +01:00
javier Martin
fd6a6394d7 ASoC: add DMA platform driver for MX1x and MX2x
This adds support for DMA platform valid for i.MX1 and i.MX2 platforms.

This is not valid for i.MX3 since it doesn't share the same DMA
interface than i.MX1 and i.MX2.

It has been tested on i.MX27 board.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05 22:31:54 +01:00
Daniel Mack
15b5bdaeeb ALSA: ASoC: cs4270: move power management hooks to snd_soc_codec_device
Power management for the cs4270 codec is currently implemented as part
of the i2c_driver struct. The disadvantage of doing it this way is that
the callbacks registered in the snd_soc_card struct are called _before_
the codec's callbacks.

That doesn't work, because the snd_soc_card callbacks will most likely
switch down the codec's power domains or pull the reset GPIOs, and
hence make the i2c communication bail out.

Fix this by binding the suspend and resume code to the
snd_soc_codec_device driver model and let the I2C functions only call
the SoC core function for resume and suspend, which do nothing currently
but will do later.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05 22:13:49 +01:00
John Bonesio
b0a2712ffd ASoC: MPC5200: Support for buffer wrap around
The code in psc_dma_bcom_enqueue_tx() didn't account for the fact that
s->runtime->control->appl_ptr can wrap around to the beginning of the
buffer. This change fixes this problem.

Signed-off-by: John Bonesio <bones@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05 22:10:14 +01:00
Mark Brown
4bc4c9a5f5 ASoC: Existing S3C24xx AC97 drivers should depend on S3C24xx
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05 17:15:04 +01:00
Mark Brown
27ded041f0 ASoC: Factor out 7 bit register 9 bit data SPI write
This converts all the Wolfson drivers using this format (the only devices
that do) except WM8753 to use it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-03 16:59:16 +01:00
Mark Brown
8d50e447d1 ASoC: Factor out I/O for Wolfson 8 bit data 16 bit register CODECs
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-03 16:59:16 +01:00
Mark Brown
afa2f1066e ASoC: Factor out I2C 8 bit address 16 bit data I/O
As part of this refactoring the type of the CODEC hw_read operation
is changed to match the regular read operation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-03 16:59:15 +01:00
Mark Brown
7084a42b96 ASoC: Add I/O control bus information to factored out cache setup
While writes tend to be able to use a fairly bus independant format to
do the writes reads are all bus specific. To allow us to factor out
this code include the bus type as a parameter when setting up the
cache.

Initially just use this to factor out hw_write_t for I2C.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-03 16:59:09 +01:00
Janusz Krzysztofik
6d7f68a1ea ASoC: add support for Amstrad E3 (Delta) machine
This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC.

Created and tested against linux-2.6.31-rc3.
Applies and works with linux-omap-2.6 commit
7c5cb7862d32cb344be7831d466535d5255e35ac as well.

Depends on:
1) latest version of the CX20442 codec driver that exposes v253_ops
   structure[1],
2) patch 2/3 form this series: TTY: Add definition of a new line
   discipline required by Amstrad E3 (Delta) ASoC driver[2].

CPU DAI parameters best matching the codec DAI has been selected out
empirically for best user experience.

Board specific audio function control (with related DAPM widgets) has been
modeled after empirically discovered codec capabilities.

Unlike other ASoC machine drivers, this one makes use of a codec provided line
discipline that is required for talking to a modem chip that can control the
codec behavoiur. As the line discipline operations must call board specific
bits as well, the machine driver registers its own line discipline ops, not
the codec provided, and then calls those codec provided from inside its own
callbacks.
If some kind of a glue, like a bus over a tty, exsited that could help in
runtime detection of a modem (bus adapter) over a more generic line discipline
(bus driver)[3], the line discipline code could be probably designed in a
more generic way.

In order to work at all, this driver requires a working McBSP1. On OMAP1510
based machines (not sure if other OMAP1 variants as well), where McBSP1 is a
DSP public peripheral, that means the kernel must provide basic DSP support,
ie. omap_dsp_init(), in order to power up the DSP. This used to be included in
linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c.
Without that, the driver would not work, ie. not shift in/out any bits over
the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply
to other code that makes use of McBSP1/McBSP3 on affected machines. I provide
an extra patch (4/3) as a temporary solution.

To work correctly in playback mode, this driver requires my prevoiusly
submitted patch that corrects pcm pointer calculation for OMAP1510 based
machines[5] (already included in linux-2.6.31-rc3).

To support codec controls, this driver requires my previously submitted patch
that adds support for modem found on Amstrad Delta[6].

[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html
[2] http://www.spinics.net/lists/linux-serial/msg01862.html
[3] http://www.spinics.net/lists/linux-serial/msg01856.html
[4] http://www.spinics.net/lists/linux-omap/msg15114.html
[5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html
[6] http://www.spinics.net/lists/linux-omap/msg15432.html

Credits to:
Mark Underwood - for his initial, omap-alsa based sound driver for
this machine,
Mark Brown - for his help, patience and excellent subsytem maintainer support.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-31 22:38:44 +01:00
Janusz Krzysztofik
ad120dae12 ASoC: CX20442: push down machine independent line discipline bits
This corrected patch adds machine independent line discipline code, prevoiusly
exsiting inside my Amstrad Delta ASoC machine dirver, to the Conexant CX20442
codec driver. The code can be used as a standalone line discipline, or as a
set of codec specific functions called from machine's line discipline
callbacks. Anyway, the line discipline itself must be registered by a machine
driver.

Applies on top of the followup to my initial driver version:
http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019757.html

Suggested by ASoC manintainer Mark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-31 22:38:44 +01:00
Lars-Peter Clausen
b8e22c1fe3 ASoC: jack: Fix race in snd_soc_jack_add_gpios
The irq can fire as soon as it has been requested, thus all fields accessed
from within the irq handler must be initialized prior to requesting the irq.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-31 22:38:43 +01:00
Mark Brown
77ee09c67e ASoC: Allow CODECs to flag invalid registers
This helps CODECs with sparse register maps work better with the
register cache display interface.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-31 18:54:48 +01:00
Mark Brown
a1daf67d72 Merge branch 'gta02-audio' into for-2.6.32 2009-07-30 13:21:38 +01:00
Barry Song
3a39f832a5 ASoC: Fix checkpatch issues and typos of ad1938 codec and bf5xx-tdm dai
1. fix "line over 80 characters" checkpatch warnings
2. ‘DMA_nnBIT_MASK’ is deprecated, use DMA_BIT_MASK instead
3. fix typos

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 21:31:53 +01:00
Lars-Peter Clausen
82c4362ee3 ASoC: neo1973_gta02_wm8753: Replace deprecated s3c_gpio calls with gpiolib
With the s3c platform has implementing gpiolib support the s3c_gpio api has been
deprecated.
This patch gets rid of all s3c_gpio calls and replaces them by using gpiolib.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 21:29:33 +01:00
Lars-Peter Clausen
69331fbdee ASoC: neo1973_gta02_wm8753: Replace snd_soc_cnew with snd_soc_add_controls.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 21:29:33 +01:00
Barry Song
c8489c3ed3 ASoC: board driver to connect bf5xx with ad1938
Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-28 22:16:02 +01:00
Barry Song
01e2ab207c ASoC: blackfin I2S(TDM mode) CPU DAI driver
The I2S DAI driver for blackfin SPORT, but works in TDM mode.
I2S is not a special case of TDM with only left and right two slots for
SPORT interface. I2S coordinates with TDM in SPORT, but not a part of
TDM. TDM require different hardware configuration with I2S, not only
different slot number.  One is "Stereo Serial Operation" mode of SPORT,
the other one is "Multichannel Operation" mode. They are incompatible
at the same time.
Hardware and DMA description and data transfer flow are much different
for I2S and TDM. Merging them as a whole will be very ugly and difficult
to maintain.
So we don't define a new DAI type, but give two DAI instances for standard
I2S and TDM, both in I2S-family DAI type. The TDM instance still uses the
I2S-family DAI type.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-28 22:15:27 +01:00
Janusz Krzysztofik
b84eab08a6 ASoC: CX20442: fix issues pointed out by subsystem maintainer
The patch fixes some checkpatch identified issues and adds a comment about
line discipline interaction to my driver code, as requested by Mark on my
inital submission (thank you Mark for applying my imperfect patch anyway).
It also fixes MODULE_ALIAS mismatch as used in my machine driver.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-28 22:15:23 +01:00
Takashi Iwai
7679d5c65b Merge branch 'fix/asoc' into for-linus
* fix/asoc:
  ASoC: tlv320aic3x: Enable PLL when not bypassed
2009-07-26 11:07:03 +02:00
Marek Vasut
4ce2f2fe61 ASoC: Switch palm27x-asoc to jack detection api
This patch removes the old method of jack detection from palm27x-asoc
driver and adds jack detection api. It also removes some other (now)
useless stuff from the driver and corrects pin configuration for the
codec.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-24 11:29:03 +01:00
Janusz Krzysztofik
178b699c25 ASoC: Jack handling enhancements as suggested by subsystem maintainer
The patch adds a few small enhancements to the ASoC jack handling, as
suggested by Mark in his comments to my Amstrad Delta driver, and a few fixes
for related bugs found while learning Mark's code and testing results.

Enhancements:
1. Update status of an ASoC jack while associating it with new gpios.
2. Really update DAPM pins while associating them with an ASoC jack.
3. Export ASoC jack gpios over gpiolib sysfs for diagnostic purposes.

Fixes:
1. Apply mask on jack status report before using it, just for case.
2. While updating jack associated DAPM pins, use full resulting jack status,
   not the status report passed as an argument.

Created and tested on linux-2.6.31-rc3

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-24 11:28:59 +01:00
Marek Vasut
474828a40f ALSA: Allow passing platform_data to devices attached to AC97 bus
This patch allows passing platform_data to devices attached to AC97 bus
(like touchscreens, battery measurement chips ...).

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-23 11:30:56 +01:00
Joonyoung Shim
a7569afa8b ASoC: MAX9877: fix write operation for register
The MAX9877 needs an address of start register when we write values to
registers through i2c_master_send(), but the code for this was missed in
max9877_write_regs().

If the value of control is 0 in the max9877_set_out_mode(), the value is
not increased to 1, but actually the value to write to the register
should be 1.
And the register bits for out_mode and osc_mode should be cleared before
writing.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-23 11:08:30 +01:00
Janusz Krzysztofik
459dc35233 ASoC: Add support for Conexant CX20442-11 voice modem codec
This patch adds support for Conexant CX20442-11 voice modem codec, suitable
for use by the ASoC board driver for Amstrad E3 (Delta) videophone. Related
sound card driver will follow.

This codec is an optional part of the Conexant SmartV three chip modem design.
As such, documentation for its proprietary digital audio interface is not
available. However, on Amstrad Delta board, thanks to Mark Underwood who
created an initial, omap-alsa based sound driver a few years ago[1], the codec
has been discovered to be accessible not only from the modem side, but also
over the OMAP McBSP based CPU DAI. Thus, the driver can be used by any sound
card that can access the codec DAI directly. The DAI configuration parameters
(sample rate and format, number of channels) has been selected out empirically
for best user experience.

The codec analogue interface consists of two pairs of analogue I/O pins:
speakerphone interface or telephone handset/headset interface. Furthermore, it
seams to provide two operation modes for speakerphone I/O: standard and
advanced, with automatic gain control and echo cancelation. Even if the codec
control interface is unknown and not available, all those interfaces and modes
can be selected over the modem chip using V.253 commands. The driver is able
to issue necessary commands over a suitable hw_write function if provided by a
sound card driver. Otherwise, the codec can be controlled over the modem from
userspace while inactive.

Even if nothig is known about the codec internal power management
capabilities, DAPM widgets has been used to model the codec audio map.
Automatically performed powering up/down of those virtual widgets results in
corresponding V.253 commands being issued.

Some driver features/oddities may be board specific, but I have no way to
verify that with any board other than Amstrad Delta.

[1] http://www.earth.li/pipermail/e3-hacking/2006-April/000481.html

Created and tested against linux-2.6.31-rc3.
Applies and works with linux-omap-2.6 commit
7c5cb7862d32cb344be7831d466535d5255e35ac as well.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-23 11:08:29 +01:00
Mark Brown
c30853df98 Merge branch 'for-2.6.31' into for-2.6.32 2009-07-23 08:22:58 +01:00
Lopez Cruz, Misael
d756b27748 ASoC: OMAP: Staticise pcm creation function of omap-pcm
Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-23 08:22:16 +01:00
Chaithrika U S
06c71282a9 ASoC: tlv320aic3x: Enable PLL when not bypassed
PLL was not being enabled when it was not bypassed. This patch
enables the PLL when it is used. Additionally, it disables the PLL
when it is bypassed.

Without this patch, the audio on TI DM646x EVM and DM355 EVM
does not work properly. The bit clocks and the frame sync signals
from the codec are not correct and hence the playback/record are faster
than usual for most sample rates. The reason for this was that the PLL
was not enabled when it was not bypassed.

Tested on DM6467 EVM, playback tested on DM355 EVM.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-23 08:14:29 +01:00
Joonyoung Shim
e458a48f87 ASoC: MAX9877: separate callback functions
The callback function to control register was used by whole controls in
MAX9877 driver, but this causes using many if statement for double
register control or invert.
So, the callback function for double register control is separate
differently, and the code for invert is added in the callback function.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 11:02:49 +01:00
javier Martin
25cbf46520 ASoC: Correct a bug with "ADC Inversion Switch" in wm8974 codec.
This corrects a bug with ADC Inversion Switch in wm8974 codec.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 00:13:27 +01:00
John Bonesio
ed0f19b237 ASoC: MPC5200: Increase the delay time between resets
Reset was failing with the original udelay(50) between the code in
psc_ac97_cold_reset() and the call to psc_ac97_warm_reset(). Through testing
it was found that a delay of 1ms was necessary for the cold_reset code to
consistently complete successfully.

Signed-off-by: John Bonesio <bones@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 00:07:51 +01:00
Mark Brown
bca146578c ASoC: Fix checkpatch issues in AD1938
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-18 11:09:42 +01:00
Mark Brown
0c11f65555 ASoC: Fix FLL reference clock division setup in WM8993
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-17 22:13:01 +01:00
Mark Brown
8aa2df5308 ASoC: Bodge around GCC 4.4.0 flow analysis bug in GCC 4.4.0
GCC 4.4.0 doesn't appear to be able to spot that we don't apply any FLL
configuration if the output frequency is zero.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-17 21:53:49 +01:00
Candelaria Villareal, Jorge
c5910a7038 ASoC: SDP3430: Add support for EXTMUTE using TWL GPIO6
Board sdp3430 has hardware support for EXTMUTE using TWL4030 GPIO6
line, controlled by register INTBR_PMBR1. Machine driver takes care
of enabling gpio line through i2c and codec driver manipulates the
line during headset ramp up/down sequence.

Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-17 10:32:39 +01:00
Takashi Iwai
416c8fe3cd ASoC: Kill direct accesses to driver_data
Replaced with dev_{get|set}_drvdata().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-17 07:48:03 +02:00
Barry Song
1274738d85 ASoC: new ad1938 codec driver based on asoc
Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-16 11:14:39 +01:00
Kevin Hilman
3e46a44739 ASoC: davinci: don't use clock names
clock name strings are no longer passed on platform_data.  Instead,
we rely entirely on struct device and clkdev to find the right clock.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-16 10:59:52 +01:00
Joonyoung Shim
9db9ed977d ASoC: MAX9877: add MAX9877 amp driver
The MAX9877 combines a high-efficiency Class D audio power amplifier
with a stereo Class AB capacitor-less DirectDrive headphone amplifier.

The max9877_add_controls() is called to register the MAX9877 specific
controls on machine specific init() of the machine driver.

The datasheet for the MAX9877 can find at the following url:
http://datasheets.maxim-ic.com/en/ds/MAX9877.pdf

[Slight edit to sort the ALL_CODECS entries -- broonie.]

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-15 16:59:31 +01:00
Mark Brown
4b75e94767 ASoC: Error out if we can't determine a suitable WM9081 sysclk
Due to the flexibility of the WM9081 FLL this should never happen
in a real system.

Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-15 11:03:51 +01:00
Mark Brown
e465d544fa ASoC: Fix sample rate lookup in WM8993
We need to use the best value we picked, not the last value we
looked at.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-15 10:01:30 +01:00
Cliff Cai
82d76f4d9f ASoC: Blackfin I2S: fix resume handling
There is no need to manually start playback/capture ourselves as the PCM
driver will handle things for us.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-14 19:44:52 +01:00
Cliff Cai
18d02bc32c ASoC: Blackfin AC97: fix resume handling
There is no need to manually start playback/capture ourselves as the PCM
driver will handle things for us.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-14 19:44:52 +01:00
Kevin Hilman
0a0cf58d93 ASoC: spdif: set module licence to GPL
Without MODULE_LICENCE("GPL"), when built as a module it will fail
to load because it uses other GPL symbols from kernel.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-13 23:01:30 +01:00
Kevin Hilman
a27e304b5c ASoC: spdif codec: enable use by modules
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-13 23:01:30 +01:00
Rongrong Cao
087d53ab11 ASoC: fix checking for external widgets bug
In SOC DAPM layer of SOUND subsystem, when add signal route (in the
function snd_soc_dapm_add_route() ), the original code has wrong logic
when dapm layer check each widget whether an external one.

Signed-off-by: Rongrong Cao <rrcao@ambarella.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-13 23:01:29 +01:00
Roel Kluin
33e319fba7 ASoC: Keep index within stac9766_reg[]
Keep index within stac9766_reg[]

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-13 10:32:18 +01:00
Greg Kroah-Hartman
864e1e8db4 Sound: remove direct access of driver_data
This is the last in-kernel direct usage of driver_data, replace it with
the proper dev_get/set_drvdata() calls.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12 13:02:10 -07:00
Mark Brown
030c819e79 Merge branch 'tlv320aic3x' into reg-cache 2009-07-10 21:06:33 +01:00
Mark Brown
d7dbf6ea40 [ARM] 5596/1: at91sam9g20-ek: Register WM8731 in board file
The WM8731 driver has been updated to allow registration via normal
device model methods rather than from within the ASoC driver probe
so update the AT91SAM9G20-EK to make use of this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09 17:15:23 +01:00
Mark Brown
cc369cf504 ASoC: WM8510 has a single frame clock so needs symmetric rates
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-09 11:28:07 +01:00
Mark Brown
cb507e7e79 ASoC: Add pop delay debug at end of DAPM sequencing
Provide an interval after the end of DAPM sequencing so that we
can distinguish between a pop in the final step of the sequence
and a pop generated from some other source outside DAPM.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 18:54:57 +01:00
Mark Brown
96fd6d471b ASoC: Configure WM8731 SYSCLK at startup on AT91SAM9G20-EK
The system clock is currently fixed by the driver and this avoids
the need for us to handle errors with enabling and disabling MCLK
(which was incorrect previously so this fixes bugs in error
handling).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 18:41:05 +01:00
Mark Brown
22df8eb4fe ASoC: Disable microphone input for AT91SAM9G20-EK by default
As shipped the board does not have inputs but it is relatively
straightforward to modify the board to hook them up so support
is provided in the driver. When these modifications have not
been made enabling the microphone stage can cause problems.

Add an ifdef to disable this by default. Don't put it into
Kconfig since users will have to get their soldering irons
out to change things.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 18:18:19 +01:00
Mark Brown
2a01e5f358 ASoC: Use CODEC as clock master on AT91SAM9G20-EK
This simplifies the driver by removing the need to manually
configure dividers within the CPU and improve audio performance
by ensuring that the optimal phase relationships between the
clocks in the system are maintained.

Note that currently this means that for playback to work the
Output Mixer HiFi switch must be enabled since otherwise CODEC
will not generate the DAC clock.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 18:05:51 +01:00
Mark Brown
4934482d93 ASoC: Limit WM8731 to symmetric rates
While the hardware is capable of some limited asynmmetric modes the
driver does not currently support those modes so tell applications
that only symmetric rates are available.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 17:48:12 +01:00
Mark Brown
942c435ba7 ASoC: Add WM8993 CODEC driver
The WM8993 is a highly integrated ultra-low power hi-fi CODEC designed
for portable devices such as multimedia phones.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 17:20:20 +01:00
Mark Brown
ff7d04b130 ASoC: DaVinci I2S needs mach/asp.h
Reported-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 17:18:30 +01:00
Mark Brown
ef38ed888e ASoC: Correct WM8731 Mic Capture Switch control name
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 17:18:28 +01:00
Mark Brown
d00efa648d ASoC: Add TLV information for WM8731
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 17:08:40 +01:00
Troy Kisky
6e5414750a ASoC: DaVinci: pcm, don't play 1st sound period twice
Update the dma link with correct data as soon as
the master channel has copied it. Otherwise, the
1st period will play twice.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 16:00:20 +01:00
Mark Brown
3f405b46a9 Merge branch 'davinci' into for-2.6.32
Conflicts:
	sound/soc/davinci/davinci-i2s.c
2009-07-07 19:18:46 +01:00
Mark Brown
4ec5c9693b Merge branch 'for-2.6.31' into for-2.6.32 2009-07-06 21:49:35 +01:00
Mark Brown
f6f1eb1033 ASoC: Factor out WM8580 register cache code
Note the slightly tricky cache usage in the volume update function due
to the requirement for a separate write for the VU bit.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 17:57:57 +01:00
Mark Brown
5f345346dd ASoC: Remove use of hw_read from TLV320AIC3x driver
The TLV320AIC3x driver is currently the only user of the CODEC hw_read
operation and is jumping through some hoops in order to do so.  In order
to support future refactoring to make the hw_read operation more usable
unwrap the usage in this driver to avoid its use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 17:35:28 +01:00
Mark Brown
1e30a5828e ASoC: Remove unused AK4535 hardware read functionality
Nothing uses it and the existing hw_read operation needs to be
refectored so it's easier to remove it rather than work with it.
Support can be re-added if the code requires volatile registers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 17:28:41 +01:00
Mark Brown
17a52fd60a ASoC: Begin to factor out register cache I/O functions
A lot of CODECs share the same register data formats and therefore
replicate the code to manage access to and caching of the register
map. In order to reduce code duplication centralised versions of
this code will be introduced with drivers able to configure the use
of the common code by calling the new snd_soc_codec_set_cache_io()
API call during startup.

As an initial user the 7 bit address/9 bit data format used by many
Wolfson devices is supported for write only CODECs and the drivers
with straightforward register cache implementations are converted to
use it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 17:24:50 +01:00
Mark Brown
5420f30723 ASoC: Fix leaks in WM8988 registration error handling
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 16:29:39 +01:00
Mark Brown
1a01417e85 ASoC: Fix WM8960 leaks on probe failure
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 15:47:03 +01:00
Mark Brown
fe5422fc4a ASoC: Fix leaks in WM8731 probe error handling
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 15:18:01 +01:00
Mark Brown
096e49d5e6 ASoC: Add CODEC volatile register operation
Add a volatile_register() operation to the CODEC structure providing a
standard operation to query if a register is volatile. This will be used
to factor out the register cache I/O operations for the CODECs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 15:12:22 +01:00
Troy Kisky
af0adf3e81 ASoC: DaVinci: i2s, add davinci_i2s_prepare and shutdown
If the codec is master then prepare should call
mcbsp_start, not trigger.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 13:14:35 +01:00
Troy Kisky
f5cfa954e6 ASoC: DaVinci: i2s, fix mcbsp_word_length update
Code previously just "ors" in this field without clearing
first. Fix, by never reading this register.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:08 +01:00
Troy Kisky
9333b594a0 ASoC: DaVinci: i2s, minor cleanup of davinci_i2s_startup
Save a few lines of code.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:08 +01:00
Troy Kisky
1bef449989 ASoC: DaVinci: i2s, only start sample generator if needed
Only start sample generator if needed, and more
cleanup on davinci_mcbsp_start.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
eba575c30b ASoC: DaVinci: i2s cleanup
Move variable declaration closer to use.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
f9af37cc63 ASoc: DaVinci: i2s, minor cleanup
Add davinci_mcbsp_dev as argument to davinci_mcbsp_start
and davinci_mcbsp_stop.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
c392bec716 ASoC: DaVinci: i2s toggle clock to complete reset
Add toggle_clock function to complete i2s reset earlier.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:06 +01:00
Troy Kisky
35cf63583d ASoC: DaVinci: i2s, remove MOD_REG_BIT macro
No functional changes. Rename variable w to something
more meaningful. Remove code obfuscating macro MOD_REG_BIT.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:06 +01:00
Lars-Peter Clausen
637a935aab ASoC: Fix wm8753 register cache size and initialization
Register cache space was not being allocated for the final register,
causing bugs when it was used.  Allocate space for it.

Also ensure that the final register is displayed in sysfs.

[Commit message rewritten to document actual issue. -- broonie]

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-03 14:35:49 +01:00
Lopez Cruz, Misael
6814044324 ASoC: TWL4030: Add tristate callbacks for HiFi and Voice
Add "set_tristate" callbacks for HiFi and Voice DAIs.
Machine drivers can enable and disable tristate for each
DAI with "snd_soc_dai_set_tristate" function.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-03 11:01:05 +01:00
Candelaria Villareal, Jorge
1b6ebdd7bb ASoC: Zoom2: Update twl4030_setup_data parameters
Add support for EXTMUTE in Zoom2 machine driver. This is necessary
to further reduce pop noise problem. Signal EXTMUTE is connected to
signal GPIO 153 in Zoom2 board.

In addition, change ramp delay value to 3 (218/161/109 ms). With
previous ramp delay value, pop noise was louder. With a longer value
the beep tone can be observed.

Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-03 11:01:05 +01:00
Grant Likely
0827d6ba0b ASoC: add locking to mpc5200-psc-ac97 driver
AC97 bus register read/write hooks need to provide locking, but the
mpc5200-psc-ac97 driver does not.  This patch adds a mutex around
the register access routines.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-03 10:41:47 +01:00
Grant Likely
07573534b0 ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared
When doing register reads, it is possible for there to be a stale
data ready bit set which will cause subsequent reads to return
prematurely with incorrect data.  This patch fixes the issues by
ensuring stale data is cleared before starting another transaction.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-03 10:41:46 +01:00
Mark Brown
1df892cba4 ASoC: Fix register cache initialisation for WM8753
The wrong register cache variable was being used to provide the size for
the memcpy(), resulting in a copy of only a void * of data.

Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
2009-07-03 10:41:45 +01:00
Candelaria Villareal, Jorge
4e49ffd10f ASoC: TWL4030: Add EXTMUTE to reduce pop-noise effect
According to TRM, an external FET controlled by a 1.8V output signal
can be used to reduce the pop-noise heard when the audio amplifier is
switched on. It is suggested that GPIO6 of TWL4030 be used, but any
other gpio can be used instead. This is indicated in machine driver
with the following twl4030_setup_data members:

-hs_extmute. Set to 1 if board has support for EXTMUTE.

-set_hs_extmute. Set to a callback funcion to control an external gpio
line. Set to NULL if MUTE[GPIO6] pin is used.

Codec driver takes care of enabling and disabling this output during
the headset pop attenuation sequence.

Also add a delay to let VMID settle in ramp up sequence.

Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-02 11:06:26 +01:00
Mark Brown
2115d2c173 Merge branch 'for-2.6.31' into for-2.6.32 2009-07-01 21:45:47 +01:00
Mark Brown
1dcf98ff8e ASoC: Add WM8523 CODEC driver
The WM8523 is a high performance stereo DAC with integral charge
pump providing 2Vrms line driver outputs using a single 3.3V power
supply rail.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-01 18:47:45 +01:00
Mark Brown
da9ff1f796 ASoC: Only disable pxa2xx-i2s clocks if we enabled them
The clock API can't cope with unbalanced enables and disables and
we only enable in hw_params() but try to disable in shutdown.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-01 18:31:32 +01:00
Mark Brown
8a123ee2a4 ASoC: WM8974 DAPM cleanups
Also implement AUX mode control.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 21:30:42 +01:00
Mark Brown
8b83a19367 ASoC: WM8974 cosmetic cleanups
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 21:30:35 +01:00
Mark Brown
cb11d39ead ASoC: Use symmetric rates for WM8974
The chip has a single LRCLK.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 21:30:25 +01:00
Mark Brown
a5f8d2f1b8 ASoC: Add WM8974 TLV information
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:34:32 +01:00
Mark Brown
91d0c3ecba ASoC: Refresh WM8974 PLL configuration
Move away from a fixed table to runtime calculation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:34:23 +01:00
Mark Brown
33d81af4d1 ASoC: Declare 2 channels for WM8974
The device is a mono device but it can read two channel data and
many I2S controllers only understand 2 channels.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:34:16 +01:00
Mark Brown
df1ef7a38d ASoC: Refresh WM8974 bias configuration
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:34:09 +01:00
Mark Brown
416356fcfa ASoC: Convert to dev_pm_ops
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:32:57 +01:00
Janusz Krzysztofik
1bdd741991 ASoC: OMAP: fix OMAP1510 broken PCM pointer callback
This patch tries to work around the problem of broken OMAP1510 PCM playback
pointer calculation by replacing DMA function call that incorrectly tries to
read the value form DMA hardware with a value computed locally from an
already maintained variable omap_runtime_data.period_index.

Tested on OMAP5910 based Amstrad Delta (E3) using work in progress ASoC
driver.

Based on linux-2.6-asoc.git v2.6.31-rc1.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 10:39:12 +01:00
Grant Likely
40d9ec14e7 ASoC: remove BROKEN from Efika and pcm030 fabric drivers
The needed spin_event_timeout() macro is now merged in from the
powerpc tree, so these drivers are no longer broken.  This reverts
commit 0c0e09e21a (ASoC: Mark MPC5200
AC97 as BROKEN until PowerPC merge issues are resolved)

Tested against 2.6.31-rc1.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 10:23:41 +01:00
Grant Likely
6a84c234da ASoC: Fix typo in MPC5200 PSC AC97 driver Kconfig
ALSA SoC drivers should be specify SND_SOC_AC97_BUS instead, not AC97_BUS.
Without SND_SOC_AC97_BUS defined, an AC97 device will not get correctly
registered on the AC97 bus, which prevents thinks like the WM9712
touchscreen driver from getting probed.

Tested against 2.6.31-rc1.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 10:23:40 +01:00
Mark Brown
9ea21ebca1 ASoC: Fix WM8961 suspend function type
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-29 16:34:57 +01:00
Mark Brown
372a14a4a4 ASoC: Remove unreferenced wm8974_add_controls()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-29 16:14:19 +01:00
Mark Brown
c2caa4da46 ASoC: Fix widget powerdown on shutdown
We need to set the widget power state we want to implement.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-26 15:36:56 +01:00
Lopez Cruz, Misael
e3c7dbb07c ASoC: Remove word "Switch" from Handsfree switch name
SoC dapm adds the suffix "Switch" to SND_SOC_DAPM_SWITCH controls,
removing word "Switch" from HandsfreeL/HandsfreeR widget name
for avoiding to duplicate it.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-26 10:39:52 +01:00
Atsushi Nemoto
647613e97f ASoC: txx9aclc: dynamically allocate dmaengine devname
Use kasprintf to allocate temporary devname string instead of a
fixed size string.
This fixes "FIXME" introduced on removal of BUS_ID_SIZE.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-25 21:06:30 +01:00
Takashi Iwai
62b1653e29 Merge branch 'for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc 2009-06-25 15:28:39 +02:00
Mark Brown
d5fc3b5fe3 Merge branch 'for-2.6.31' into for-2.6.32 2009-06-25 13:58:37 +01:00
Mark Brown
e2f551dacb ASoC: Add core suspend and resume callbacks to WM8961
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-25 13:57:59 +01:00
Mark Brown
517374704d ASoC: Add a shutdown callback
Ensure that the audio subsystem is powered down cleanly when the system
shuts down by providing a shutdown operation. This ensures that all the
components have been returned to an off state cleanly which should avoid
audio issues from partially charged capacitors or noise on digital inputs
if the system is restarted quickly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23 23:48:53 +01:00
Linus Torvalds
c488eef815 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Make jack-plug notification selectable
  ALSA: ctxfi - Add PM support
  sound: seq_midi_event: fix decoding of (N)RPN events
  ALSA: hda - Add digital-mic support to ALC262 auto model
  ALSA: hda - Fix check of input source type for realtek codecs
  ALSA: hda - Add quirk for Sony VAIO Z21MN
  ALSA: hda - Get back Input Source for ALC262 toshiba-s06 model
  ALSA: hda - Fix unsigned comparison in patch_sigmatel.c
  ALSA: via82xx: add option to disable 500ms delay in snd_via82xx_codec_wait
  sound: fix check for return value in snd_pcm_hw_refine
  ALSA: ctxfi - Allow unknown PCI SSIDs
  ASoC: Blackfin: update the bf5xx_i2s_resume parameters
  ASoC: Blackfin: keep better track of SPORT configuration state
2009-06-23 10:45:39 -07:00
Lopez Cruz, Misael
30808ca751 ASoC: TWL4030: Correct bypass event for voice sidetone
Event for voice sidetone was being interpreted as an
analog HiFi bypass event because VSTPGA register offset
is less than ARXR2_APGA_CTL offset. Reordering the
register checks allows to handle voice digital bypass
event properly.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-23 10:57:38 +01:00
Lopez Cruz, Misael
328d0a138e ASoC: TWL4030: Add AVADC Clock Priority
AVDAC clk priority allows to determine the path ADC must
be connected when the codec is in option2 and both HiFi
and Voice paths are enabled.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-23 10:57:37 +01:00
Linus Torvalds
9e268beb92 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (49 commits)
  [ARM] idle: clean up pm_idle calling, obey hlt_counter
  [ARM] S3C: Fix gpio-config off-by-one bug
  [ARM] S3C64XX: add to_irq() support for EINT() GPIO
  [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit
  [ARM] S3C64XX: fix HCLK gate defines
  [ARM] Update mach-types
  [ARM] wire up rt_tgsigqueueinfo and perf_counter_open
  OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons
  OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL
  OMAP3: Add support for DPLL3 divisor values higher than 2
  OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
  OMAP3 SRAM: add more comments on the SRAM code
  OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
  OMAP3 clock: add a short delay when lowering CORE clk rate
  OMAP3 clock: initialize SDRC timings at kernel start
  OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
  [ARM] Add old Feroceon support to compressed/head.S
  [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit
  [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks
  [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU
  ...
2009-06-22 14:56:13 -07:00
Lopez Cruz, Misael
c264301c77 ASoC: TWL4030: Fix voice interface clock masters
Voice interface of twl4030 codec supports: CBM_CFM and
CBS_CFS. It doesn't support CBS_CFM.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-By: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-22 11:24:04 +01:00
Mark Brown
e370f45aeb Merge branch 'wm8961' into for-2.6.32 2009-06-22 11:08:26 +01:00
Linus Torvalds
413318444f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add model=6530g option
  ALSA: hda - Acer Inspire 6530G model for Realtek ALC888
  ALSA: snd_usb_caiaq: fix legacy input streaming
  ASoC: Kill BUS_ID_SIZE
  ALSA: HDA - Correct trivial typos in comments.
  ALSA: HDA - Name-fixes in code (tagra/targa)
  ALSA: HDA - Add pci-quirk for MSI MS-7350 motherboard.
  ALSA: hda - Fix memory leak at codec creation
2009-06-21 13:13:08 -07:00
Barry Song
f274143f12 ASoC: Blackfin: convert internal names from bf52x to bf5xx
These drivers aren't BF52x specific, so don't use bf52x in the names.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-20 19:47:56 +01:00
Barry Song
92a6ad3428 ASoC: Blackfin: update the bf5xx_i2s_resume parameters
Latest ASoC only passes snd_soc_dai to the resume function.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-20 19:45:28 +01:00
Cliff Cai
895c9c0565 ASoC: Blackfin: keep better track of SPORT configuration state
Do not let the SPORT be reconfigured until there are no more active
streams.  Then we can let the system reprogram the SPORT state.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-20 19:45:28 +01:00
Mark Brown
423c238d71 ASoC: Staticise put_twl4030_opmode_enum_double()
It's an operation for a control and doesn't need to be exported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-20 13:58:09 +01:00
Mark Brown
b53109db5e ASoC: Fix shadowed variables in twl4030
No need to define second copies of mode and format, they're declared
with exactly the same type at the head of the function and there's no
conflict in their use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-20 13:58:08 +01:00
Russell King
187f81b3d8 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-06-18 23:09:52 +01:00