Commit Graph

1794 Commits

Author SHA1 Message Date
Linus Torvalds
03a2c4d76c Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (151 commits)
  vga_switcheroo: disable default y by new rules.
  drm/nouveau: fix *staging* driver build with switcheroo off.
  drm/radeon: fix typo in Makefile
  vga_switcheroo: fix build on platforms with no ACPI
  drm/radeon: Fix printf type warning in 64bit system.
  drm/radeon/kms: bump the KMS version number for square tiling support.
  vga_switcheroo: initial implementation (v15)
  drm/radeon/kms: do not disable audio engine twice
  Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730"
  drm/radeon/kms: do not preset audio stuff and start timer when not using audio
  drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
  drm/ttm: fix function prototype to match implementation
  drm/radeon: use ALIGN instead of open coding it
  drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
  drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
  drm/i915: enable/disable LVDS port at DPMS time
  drm/i915: check for multiple write domains in pin_and_relocate
  drm/i915: clean-up i915_gem_flush_gpu_write_domain
  drm/i915: reuse i915_gpu_idle helper
  drm/i915: ensure lru ordering of fence_list
  ...

Fixed trivial conflicts in drivers/gpu/vga/Kconfig
2010-03-04 07:49:37 -08:00
Dave Airlie
d424b925f7 vga_switcheroo: disable default y by new rules.
Another undocumented rule of kernel folklore, no default y
config options anymore, apparantly hinting to distros they might
want something isn't preferred anymore.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-03 09:26:35 +10:00
Dave Airlie
2f41a7f11c drm/nouveau: fix *staging* driver build with switcheroo off.
This driver is in *staging*. Fix the build with the switcheroo off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-03 09:20:25 +10:00
Alex Deucher
9b11fe5f49 drm/radeon: fix typo in Makefile
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-02 06:32:47 +10:00
Dave Airlie
8edb381d67 vga_switcheroo: fix build on platforms with no ACPI
radeon was always including the atpx code unnecessarily, also core
switcheroo was including acpi headers.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 22:21:58 +11:00
Pauli Nieminen
55a5cb5d59 drm/radeon: Fix printf type warning in 64bit system.
Type of iterator was promoted to unsigned long in 64bit systems.

*header is small structure so it is alwas safe to cast return value
of sizeof operator to int.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
2010-03-01 22:21:37 +11:00
Dave Airlie
0de1a57bed drm/radeon/kms: bump the KMS version number for square tiling support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:32:15 +10:00
Dave Airlie
1c62233508 Merge branch 'gpu-switcher' of /ssd/git//linux-2.6 into drm-next-stage
* 'gpu-switcher' of /ssd/git//linux-2.6:
  vga_switcheroo: initial implementation (v15)
  fb: for framebuffer handover don't exit the loop early.

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/radeon/Makefile
	drivers/gpu/drm/radeon/radeon.h
2010-03-01 16:22:38 +10:00
Dave Airlie
6a9ee8af34 vga_switcheroo: initial implementation (v15)
Many new laptops now come with 2 gpus, one to be used for low power
modes and one for gaming/on-ac applications. These GPUs are typically
wired to the laptop panel and VGA ports via a multiplexer unit which
is controlled via ACPI methods.

4 combinations of systems typically exist - with 2 ACPI methods.
Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method
ATI/ATI - some ASUS - use ATPX ACPI Method
Intel/Nvidia - - use _DSM ACPI method
Nvidia/Nvidia -  - use _DSM ACPI method.

TODO:
This patch adds support for the ATPX method and initial bits
for the _DSM methods that need to written by someone with
access to the hardware.
Add a proper non-debugfs interface - need to get some proper
testing first.

v2: add power up/down support for both devices
on W500 puts i915/radeon into D3 and cuts power to radeon.

v3: redo probing methods, no DMI list, drm devices call to
register with switcheroo, it tries to find an ATPX method on
any device and once there is two devices + ATPX it inits the
switcher.

v4: ATPX msg handling using buffers - should work on more machines

v5: rearchitect after more mjg59 discussion - move ATPX handling to
    radeon driver.

v6: add file headers + initial nouveau bits (to be filled out).

v7: merge delayed switcher code.

v8: avoid suspend/resume of gpu that is off

v9: rearchitect - mjg59 is always right. - move all ATPX code to
radeon, should allow simpler DSM also proper ATRM handling

v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv

v11: fix bug in resuming Intel for 2nd time.

v12: start fixing up nvidia code blindly.

v13: blindly guess at finishing nvidia code

v14: remove radeon audio hacks - fix up intel resume more like upstream

v15: clean up printks + remove unnecessary igd/dis pointers

mount debugfs

/sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected
 + 2 cards.

DIS - immediate change to discrete
IGD - immediate change to IGD
DDIS - delayed change to discrete
DIGD - delayed change to IGD
ON - turn on not in use
OFF - turn off not in use

Tested on W500 (Intel/ATI) and T500 (Intel/ATI)

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:20:37 +10:00
Rafał Miłecki
6d9c135136 drm/radeon/kms: do not disable audio engine twice
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:09:43 +10:00
Rafał Miłecki
3464f11496 Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730"
This commit "disabled" audio on RV710 and RV740 only, leaving RV770 and RV730.
The order is: CHIP_RV770 < CHIP_RV730 < CHIP_RV710 < CHIP_RV740.

It is not needed anway, as we do not even try to enable audio on RV770 and
newer. We call initializing function in r600.c only, not in rv770.c.

If there is something causing green tinges, it's HDMI mode setting for encoder
and I will try to debug that.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:09:41 +10:00
Rafał Miłecki
c8792d5e6c drm/radeon/kms: do not preset audio stuff and start timer when not using audio
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:09:40 +10:00
Dave Airlie
68de774582 Merge branch 'drm-radeon-testing' of /ssd/git/drm-radeon-next into drm-next-stage
* 'drm-radeon-testing' of /ssd/git/drm-radeon-next:
  drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
  drm/ttm: fix function prototype to match implementation
  drm/radeon: use ALIGN instead of open coding it
  drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
2010-03-01 16:08:57 +10:00
Dave Airlie
566d84d172 drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
radeon's have a special ability to passthrough writes in their internal
memory space directly to PCI, this ability means that if some of the internal
surfaces like the depth buffer point at 0x0, any writes to these will
go directly to RAM at 0x0 via PCI busmastering.

Now mesa used to always emit clears after emitting state, since the
radeon mesa driver was refactored a year or more ago, it was found it
could generate a clear request without ever sending any setup state to the
card. So the clear would attempt to clear the depth buffer at 0x0, which
would overwrite main memory at this point. fs corruption ensues.

Also once one app did this correctly, it would never get set back to 0
making this messy to reproduce.

The kernel should block this from happening as mesa runs without privs,
though it does require the user be connected to the current running X session.

This patch implements a check to make sure the depth offset has been set
before a depth clear occurs and if it finds one it prints a warning and
ignores the depth clear request. There is also a mesa fix to avoid sending
the badness going into mesa.

This only affects r100/r200 GPUs in user modesetting mode.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:08:22 +10:00
Matt Turner
d964fc54ed drm/radeon: use ALIGN instead of open coding it
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Corbin Simpson <MostAwesomeDude@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 15:56:41 +10:00
Jerome Glisse
32b3c2abaf drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
rs600 asic was missing set_surface_reg callback leading to
oops.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 15:50:37 +10:00
Dave Airlie
cf7934a2a0 Merge remote branch 'anholt/drm-intel-next' into drm-next-stage
* anholt/drm-intel-next: (103 commits)
  drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
  drm/i915: enable/disable LVDS port at DPMS time
  drm/i915: check for multiple write domains in pin_and_relocate
  drm/i915: clean-up i915_gem_flush_gpu_write_domain
  drm/i915: reuse i915_gpu_idle helper
  drm/i915: ensure lru ordering of fence_list
  drm/i915: extract fence stealing code
  drm/i915: fixup active list locking in object_unbind
  drm/i915: reuse i915_gem_object_put_fence_reg for fence stealing code
  drm/i915: Add dependency on the intel agp module
  drm/i915: More s/IS_IRONLAKE/HAS_PCH_SPLIT for Sandybridge.
  drm/i915: Correct the Sandybridge chipset info structs.
  drm/i915: Disable the hangcheck reset on Sandybridge until we add support.
  drm/i915: Add a new mobile Sandybridge PCI ID.
  agp/intel: Add a new Sandybridge HB/IG PCI ID combo.
  drm/i915, agp/intel: Fix stolen memory size on Sandybridge
  drm/i915: Correct locking in the modesetting failure path, fixing a BUG_ON.
  drm/i915: Disable the surface tile swizzling on Sandybridge.
  agp/intel: Use a non-reserved value for the cache field of the PTEs.
  drm/i915: Fix sandybridge status page setup.
  ...
2010-03-01 15:41:26 +10:00
Dave Airlie
aa71fa3cd5 Merge remote branch 'nouveau/for-airlied' into drm-next-stage
* nouveau/for-airlied: (25 commits)
  drm/nouveau: use ALIGN instead of open coding it
  drm/nouveau: report unknown connector state if lid closed
  drm/nouveau: support version 0x20 displayport tables
  drm/nouveau: Fix noaccel/nofbaccel option descriptions.
  drm/nv50: Implement ctxprog/state generation.
  drm/nouveau: use dcb connector types throughout the driver
  drm/nv50: enable hpd on any connector we know the gpio line for
  drm/nouveau: use dcb connector table for creating drm connectors
  drm/nouveau: construct a connector table for cards that lack a real one
  drm/nouveau: check for known dcb connector types
  drm/nouveau: parse dcb gpio/connector tables after encoders
  drm/nouveau: reorganise bios header, add dcb connector type enums
  drm/nouveau: merge nvbios and nouveau_bios_info
  drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_table
  drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_table
  drm/nouveau: allow retrieval of vbios image from debugfs
  drm/nouveau: fix missing spin_unlock in failure path
  drm/nouveau: fix i2ctable bounds checking
  drm/nouveau: fix nouveau_i2c_find bounds checking
  drm/nouveau: fix pramdac_table range checking
  ...

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_gem.c
2010-03-01 15:41:15 +10:00
Dave Airlie
79fa9eb739 Merge remote branch 'korg/drm-core-next' into drm-next-stage
* korg/drm-core-next:
  drm/ttm: handle OOM in ttm_tt_swapout
  drm/radeon/kms/atom: fix shr/shl ops
  drm/kms: fix spelling of "CLOCK"
  drm/kms: fix fb_changed = true else statement
  drivers/gpu/drm/drm_fb_helper.c: don't use private implementation of atoi()
  drm: switch all GEM/KMS ioctls to unlocked ioctl status.
  Use drm_gem_object_[handle_]unreference_unlocked where possible
  drm: introduce drm_gem_object_[handle_]unreference_unlocked
2010-03-01 15:40:12 +10:00
Linus Torvalds
c7e15899d0 Merge branch 'x86-pci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-pci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Enable NMI on all cpus on UV
  vgaarb: Add user selectability of the number of GPUS in a system
  vgaarb: Fix VGA arbiter to accept PCI domains other than 0
  x86, uv: Update UV arch to target Legacy VGA I/O correctly.
  pci: Update pci_set_vga_state() to call arch functions
2010-02-28 10:59:18 -08:00
Zhao Yakui
6070a4a928 drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
This IBM system has a multi-function SDVO card that reports both VGA
and TV, but the system has no TV connector.  The TV connector always
reported as connected, which would lead to poor modesetting choices.

https://bugs.freedesktop.org/show_bug.cgi?id=25787

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Vance <liangghv@sg.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:22 -08:00
Jesse Barnes
469d129664 drm/i915: enable/disable LVDS port at DPMS time
It would be good to disable the LVDS port when we shut down the panel
to save power.  We haven't done so until now because we had trouble
getting the right LVDS parameters from the BIOS.  I think we're past
that now, so enabling and disabling the port should be safe, though it
would probably be made cleaner with some additional changes to the
display code, where we also bang on the LVDS reg to set the pairing
correctly etc.

Seems to save a bit of power (up to 300mW in my basic wattsup
meter testing).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:22 -08:00
Daniel Vetter
16edd55029 drm/i915: check for multiple write domains in pin_and_relocate
The assumption that an object has only ever one write domain is deeply
threaded into gem (it's even encoded the the singular of the variable
name). Don't let userspace screw us over.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:22 -08:00
Daniel Vetter
922a2efc1b drm/i915: clean-up i915_gem_flush_gpu_write_domain
Now that we have an exact gpu write domain tracking, we don't need
to move objects to the active list ourself. i915_add_request will
take care of that under all circumstances.

Idea stolen from a patch by Chris Wilson <chris@chris-wilson.co.uk>.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:22 -08:00
Daniel Vetter
4df2faf451 drm/i915: reuse i915_gpu_idle helper
We have it, so use it. This required moving the function to avoid
a forward declaration.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:21 -08:00
Daniel Vetter
6356039653 drm/i915: ensure lru ordering of fence_list
The fence_list should be lru ordered for otherwise we might try
to steal a fence reg from an active object even though there are
fences from inactive objects available. lru ordering was obeyed
for gpu access everywhere save when moving dirty objects from
flushing_list to active_list.

Fixing this cause the code to indent way to much, so I've extracted
the flushing_list processing logic into its on function.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:21 -08:00
Daniel Vetter
ae3db24aab drm/i915: extract fence stealing code
The spaghetti logic in there tripped up my brain's code parser for a
few secs. Prevent this from happening again by extracting the fence
stealing code into a seperate functions. IMHO this slightly clears up
the code flow.

v2: Beautified according to ickle's comments.
v3: ickle forgot to flush his comment queue ... Now there's also a
we-are-paranoid BUG_ON in there.
v4: I've forgotten to switch on my brain when doing v3. Now the BUG_ON
actually checks something useful.
v5: Clean up a stale comment as noted by Eric Anholt.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:21 -08:00
Daniel Vetter
4a87b8ca21 drm/i915: fixup active list locking in object_unbind
All other accesses take this spinlock, so do this here, too.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:21 -08:00
Daniel Vetter
798750e30d drm/i915: reuse i915_gem_object_put_fence_reg for fence stealing code
This has a few functional changes against the old code:

* a few more unnecessary loads and stores to the drm_i915_fence_reg
  objects. Also an unnecessary store to the hw fence register.

* zaps any userspace mappings before doing other flushes. Only changes
  anything when userspace does racy stuff against itself.

* also flush GTT domain. This is a noop, but still try to keep the
  bookkeeping correct.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:21 -08:00
Zhenyu Wang
1f7a6e372e drm/i915: Add dependency on the intel agp module
See http://bugzilla.kernel.org/show_bug.cgi?id=15021

Make sure that the appropriate AGP module is loaded and probed before
trying to set up the DRM.  The DRM already depends on the AGP core,
but in this case we know the specific AGP driver we need too, and can
help users avoid the trap of loading the AGP driver after the DRM
driver.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:20 -08:00
Eric Anholt
c619eed4b2 drm/i915: More s/IS_IRONLAKE/HAS_PCH_SPLIT for Sandybridge.
I think this is pretty much correct.  Not really tested.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:20 -08:00
Eric Anholt
faa7bde6cb drm/i915: Correct the Sandybridge chipset info structs.
Disables CXSR until it's done, and sets the mobile bit on mobile.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:20 -08:00
Eric Anholt
b9201c14d9 drm/i915: Disable the hangcheck reset on Sandybridge until we add support.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:20 -08:00
Eric Anholt
a13e4093cb drm/i915: Add a new mobile Sandybridge PCI ID.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:19 -08:00
Zhenyu Wang
14bc490bbd drm/i915, agp/intel: Fix stolen memory size on Sandybridge
New memory control config reg at 0x50 should be used for stolen
memory size detection on Sandybridge.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:19 -08:00
Eric Anholt
21099537db drm/i915: Correct locking in the modesetting failure path, fixing a BUG_ON.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:18 -08:00
Eric Anholt
c2416fc6bb drm/i915: Disable the surface tile swizzling on Sandybridge.
I can't explain this, except that it makes my display correct.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:18 -08:00
Eric Anholt
f6e450a641 drm/i915: Fix sandybridge status page setup.
The register's moved to the same location as the one for the BCS, it seems.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:18 -08:00
Eric Anholt
4e901fdc26 drm/i915: Set up fence registers on sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:18 -08:00
Eric Anholt
bad720ff3e drm/i915: Add initial bits for VGA modesetting bringup on Sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:17 -08:00
Dave Airlie
eb6b6d7cdd Merge remote branch 'korg/drm-radeon-testing' into drm-next-stage
* korg/drm-radeon-testing: (62 commits)
  drm/radeon/kms: update new pll algo
  drm/radeon/kms: add support for square microtiles on r3xx-r5xx
  drm/radeon/kms: force pinning buffer into visible VRAM
  drm/radeon/kms/evergreen: fix typo in cursor code
  drm/radeon/kms: implement reading active PCIE lanes on R600+
  drm/radeon/kms: for downclocking non-mobility check PERFORMANCE state
  drm/radeon/kms: simplify storing current and requested PM mode
  drm/radeon: fixes for r6xx/r7xx gfx init
  drm/radeon/rv740: fix backend setup
  drm/radeon/kms: fix R3XX/R4XX memory controller initialization
  [rfc] drm/radeon/kms: pm debugging check for vbl.
  drm/radeon: Fix memory allocation failures in the preKMS command stream checking.
  drm: Add generic multipart buffer.
  drm/radeon/kms: simplify memory controller setup V2
  drm/radeon: Add asic hook for dma copy to r200 cards.
  drm/radeon/kms: Create asic structure for r300 pcie cards.
  drm/radeon/kms: remove unused r600_gart_clear_page
  drm/radeon/kms: remove HDP flushes from fence emit (v2)
  drm/radeon/kms: add LVDS pll quirk for Dell Studio 15
  drm/radeon/kms: simplify picking power state
  ...

Conflicts:
	drivers/gpu/drm/radeon/atom.c
	drivers/gpu/drm/radeon/atombios.h
	drivers/gpu/drm/radeon/atombios_dp.c
	drivers/gpu/drm/radeon/r600.c
	drivers/gpu/drm/radeon/r600_audio.c
	drivers/gpu/drm/radeon/r600_cp.c
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_connectors.c
	drivers/gpu/drm/radeon/radeon_ring.c
	drivers/gpu/drm/radeon/rv770.c
2010-02-26 16:23:23 +10:00
Linus Torvalds
6ebdc661b6 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits)
  of: remove undefined request_OF_resource & release_OF_resource
  of/sparc: Remove sparc-local declaration of allnodes and devtree_lock
  of: move definition of of_chosen into common code.
  of: remove unused extern reference to devtree_lock
  of: put default string compare and #a/s-cell values into common header
  of/flattree: Don't assume HAVE_LMB
  of: protect linux/of.h with CONFIG_OF
  proc_devtree: fix THIS_MODULE without module.h
  of: Remove old and misplaced function declarations
  of/flattree: Make the kernel accept ePAPR style phandle information
  of/flattree: endian-convert members of boot_param_header
  of: assume big-endian properties, adding conversions where necessary
  of: use __be32 for cell value accessors
  of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing
  of/flattree: use callback to setup initrd from /chosen
  proc_devtree: include linux/of.h
  of: make set_node_proc_entry private to proc_devtree.c
  of: include linux/proc_fs.h
  of/flattree: merge early_init_dt_scan_memory() common code
  of: add 'of_' prefix to machine_is_compatible()
  ...
2010-02-25 15:38:37 -08:00
Matt Turner
3bfc7d22d0 drm/nouveau: use ALIGN instead of open coding it
CC: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:46 +10:00
Ben Skeggs
b30083bdb9 drm/nouveau: report unknown connector state if lid closed
This is in preference to disconnected.  If there's no other outputs
connected this will cause LVDS to be programmed even with the lid
closed rather than having X fail to start because of no available
outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:44 +10:00
Ben Skeggs
c52e53fd38 drm/nouveau: support version 0x20 displayport tables
Not entirely identical to 0x21, the per-encoder table header lacks the
third init table pointer.  However, our current parsing of the table
should work just fine.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:42 +10:00
Marcin Kościelnicki
81e2d42200 drm/nouveau: Fix noaccel/nofbaccel option descriptions.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:40 +10:00
Marcin Kościelnicki
d5f3c90d4f drm/nv50: Implement ctxprog/state generation.
This removes dependence on external firmware for NV50 generation cards.
If the generated ctxprogs don't work for you for some reason, please
report it.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:38 +10:00
Ben Skeggs
be079e97b5 drm/nouveau: use dcb connector types throughout the driver
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:36 +10:00
Ben Skeggs
1157563931 drm/nv50: enable hpd on any connector we know the gpio line for
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:34 +10:00
Ben Skeggs
7f612d87f8 drm/nouveau: use dcb connector table for creating drm connectors
This makes this code common to both the nv04 and nv50 paths.

For the moment, we keep the previous behaviour with HDMI/eDP connectors
and report them as DVI-D/DP instead.  This will be fixed once the rest
of the code has been fixed to deal with those types.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:32 +10:00