Commit Graph

36 Commits

Author SHA1 Message Date
David S. Miller
ca3dd88e41 [SPARC64] PCI: Consolidate PCI access code into pci_common.c
All the sun4u controllers do the same thing to compute the physical
I/O address to poke, and we can move the sun4v code into this common
location too.

This one needs a bit of testing, in particular the Sabre code had some
funny stuff that would break up u16 and/or u32 accesses into pieces
and I didn't think that was needed any more.  If it is we need to find
out why and add back code to do it again.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-09 02:35:27 -07:00
David S. Miller
af80318eb7 [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 17:23:31 -07:00
David S. Miller
c57c2ffb15 [SPARC64]: Kill asm-sparc64/pbm.h
Everything it contains can be hidden in pci_impl.h

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 16:43:08 -07:00
David S. Miller
6c108f1299 [SPARC64]: Move index info pci_pbm_info.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 16:41:40 -07:00
David S. Miller
f1cd8de2c9 [SPARC64]: Move pci_ops into pci_pbm_info.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 16:41:32 -07:00
David S. Miller
34768bc832 [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's
The idea is to move more and more things into the pbm,
with the eventual goal of eliminating the pci_controller_info
entirely as there really isn't any need for it.

This stage of the transformations requires some reworking of
the PCI error interrupt handling.

It might be tricky to get rid of the pci_controller_info parenting for
a few reasons:

1) When we get an uncorrectable or correctable error we want
   to interrogate the IOMMU and streaming cache of both
   PBMs for error status.  These errors come from the UPA
   front-end which is shared between the two PBM PCI bus
   segments.

   Historically speaking this is why I choose the datastructure
   hierarchy of pci_controller_info-->pci_pbm_info

2) The probing does a portid/devhandle match to look for the
   'other' pbm, but this is entirely an artifact and can be
   eliminated trivially.

What we could do to solve #1 is to have a "buddy" pointer from one pbm
to another.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 16:41:24 -07:00
David S. Miller
cfa0652c4e [SPARC64] PCI: Use common routine to fetch PBM properties.
Namely bus-range and ino-bitmap.

This allows us also to eliminate pci_controller_info's
pci_{first,last}_busno fields as only the pbm ones are
used now.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 16:41:12 -07:00
David S. Miller
16ce82d846 [SPARC64]: Convert PCI over to generic struct iommu/strbuf.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 21:08:21 -07:00
David S. Miller
a165b4205e [SPARC64]: Fix PCI rework to adhere to of_get_property() const return.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:37 -07:00
David S. Miller
97b3cf050b [SPARC64]: Add dummy host controller to root of all PCI domains.
We fake up a dummy one in all cases because that is the simplest
thing to do and it happens to be necessary for hypervisor systems.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:19 -07:00
David S. Miller
0bba2dd823 [SPARC64]: Kill pbm->pci_first_slot.
Set but never used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:17 -07:00
David S. Miller
8d3aee9375 [SPARC64]: Kill pci_controller->base_address_update().
Implemented but never actually used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:15 -07:00
David S. Miller
0bae5f81b6 [SPARC64]: Kill pci_controller->resource_adjust()
All the implementations can be identical and generic, so
no need for controller specific methods.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:14 -07:00
David S. Miller
3487a1f9e7 [SPARC64]: Kill PBM ranges software state.
It is only used in one spot and we can just fetch the
OF property right there.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:13 -07:00
David S. Miller
229177c7f3 [SPARC64]: Kill PBM intmap software state.
Set but never used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:12 -07:00
David S. Miller
9fd8b64761 [SPARC64]: Consolidate PCI mem/io resource determination.
It can be done for every PCI configuration using OF properties.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:11 -07:00
David S. Miller
bc606f3c91 [SPARC64]: Minor cleanups to schizo pci controller driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:08 -07:00
David S. Miller
a2fb23af1c [SPARC64]: Probe PCI bus using OF device tree.
Almost entirely taken from the 64-bit PowerPC PCI code.

This allowed to eliminate a ton of cruft from the sparc64
PCI layer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:06 -07:00
Al Viro
6d24c8dc2e [PATCH] sparc64 pt_regs fixes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-08 12:32:35 -07:00
Thomas Gleixner
d356d7f4f2 [PATCH] irq-flags: SPARC64: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:48 -07:00
David S. Miller
2b1e597871 [SPARC64]: of_device layer IRQ resolution
Do IRQ determination generically by parsing the PROM properties,
and using IRQ controller drivers for final resolution.

One immediate positive effect is that all of the IRQ frobbing
in the EBUS, ISA, and PCI controller layers has been eliminated.
We just look up the of_device and use the properly computed
value.

The PCI controller irq_build() routines are gone and no longer
used.  Unfortunately sbus_build_irq() has to remain as there is
a direct reference to this in the sunzilog driver.  That can be
killed off once the sparc32 side of this is written and the
sunzilog driver is transformed into an "of" bus driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 16:37:38 -07:00
David S. Miller
de8d28b16f [SPARC64]: Convert sparc64 PCI layer to in-kernel device tree.
One thing this change pointed out was that we really should
pull the "get 'local-mac-address' property" logic into a helper
function all the network drivers can call.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:26 -07:00
David S. Miller
e87dc35020 [SPARC64]: Use in-kernel OBP device tree for PCI controller probing.
It can be pushed even further down, but this is a first step.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:07 -07:00
David S. Miller
e18e2a00ef [SPARC64]: Move over to GENERIC_HARDIRQS.
This is the long overdue conversion of sparc64 over to
the generic IRQ layer.

The kernel image is slightly larger, but the BSS is ~60K
smaller due to the reduced size of struct ino_bucket.

A lot of IRQ implementation details, including ino_bucket,
were moved out of asm-sparc64/irq.h and are now private to
arch/sparc64/kernel/irq.c, and most of the code in irq.c
totally disappeared.

One thing that's different at the moment is IRQ distribution,
we do it at enable_irq() time.  If the cpu mask is ALL then
we round-robin using a global rotating cpu counter, else
we pick the first cpu in the mask to support single cpu
targetting.  This is similar to what powerpc's XICS IRQ
support code does.

This works fine on my UP SB1000, and the SMP build goes
fine and runs on that machine, but lots of testing on
different setups is needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:23:32 -07:00
David S. Miller
8047e247c8 [SPARC64]: Virtualize IRQ numbers.
Inspired by PowerPC XICS interrupt support code.

All IRQs are virtualized in order to keep NR_IRQS from needing
to be too large.  Interrupts on sparc64 are arbitrary 11-bit
values, but we don't need to define NR_IRQS to 2048 if we
virtualize the IRQs.

As PCI and SBUS controller drivers build device IRQs, we divy
out virtual IRQ numbers incrementally starting at 1.  Zero is
a special virtual IRQ used for the timer interrupt.

So device drivers all see virtual IRQs, and all the normal
interfaces such as request_irq(), enable_irq(), etc. translate
that into a real IRQ number in order to configure the IRQ.

At this point knowledge of the struct ino_bucket is almost
entirely contained within arch/sparc64/kernel/irq.c  There are
a few small bits in the PCI controller drivers that need to
be swept away before we can remove ino_bucket's definition
out of asm-sparc64/irq.h and privately into kernel/irq.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:22:35 -07:00
David S. Miller
37cdcd9e82 [SPARC64]: Kill ino_bucket->pil
And reuse that struct member for virt_irq, which will
be used in future changesets for the implementation of
mapping between real and virtual IRQ numbers.

This nicely kills off a ton of SBUS and PCI controller
PIL assignment code which is no longer necessary.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:21:57 -07:00
David S. Miller
ee29074d3b [SPARC64]: Fix new context version SMP handling.
Don't piggy back the SMP receive signal code to do the
context version change handling.

Instead allocate another fixed PIL number for this
asynchronous cross-call.  We can't use smp_call_function()
because this thing is invoked with interrupts disabled
and a few spinlocks held.

Also, fix smp_call_function_mask() to count "cpus" correctly.
There is no guarentee that the local cpu is in the mask
yet that is exactly what this code was assuming.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:14:21 -08:00
Eric Sesterhenn
9132983ae1 [SPARC64]: kzalloc() conversion
this patch converts arch/sparc64 to kzalloc usage.
Crosscompile tested with allyesconfig.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:14:19 -08:00
David S. Miller
51e8513615 [SPARC64]: Consolidate common PCI IOMMU init code.
All the PCI controller drivers were doing the same thing
setting up the IOMMU software state, put it all in one spot.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13 21:10:08 -07:00
David S. Miller
52f26deb7c [SPARC64]: Fix mask formation in tomatillo_wsync_handler()
"1" needs to be "1UL", this is a 64-bit mask we're creating.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-24 23:06:14 -07:00
David S. Miller
085ae41f66 [PATCH] Make sparc64 use setup-res.c
There were three changes necessary in order to allow
sparc64 to use setup-res.c:

1) Sparc64 roots the PCI I/O and MEM address space using
   parent resources contained in the PCI controller structure.
   I'm actually surprised no other platforms do this, especially
   ones like Alpha and PPC{,64}.  These resources get linked into the
   iomem/ioport tree when PCI controllers are probed.

   So the hierarchy looks like this:

   iomem --|
	   PCI controller 1 MEM space --|
				        device 1
					device 2
					etc.
	   PCI controller 2 MEM space --|
				        ...
   ioport --|
            PCI controller 1 IO space --|
					...
            PCI controller 2 IO space --|
					...

   You get the idea.  The drivers/pci/setup-res.c code allocates
   using plain iomem_space and ioport_space as the root, so that
   wouldn't work with the above setup.

   So I added a pcibios_select_root() that is used to handle this.
   It uses the PCI controller struct's io_space and mem_space on
   sparc64, and io{port,mem}_resource on every other platform to
   keep current behavior.

2) quirk_io_region() is buggy.  It takes in raw BUS view addresses
   and tries to use them as a PCI resource.

   pci_claim_resource() expects the resource to be fully formed when
   it gets called.  The sparc64 implementation would do the translation
   but that's absolutely wrong, because if the same resource gets
   released then re-claimed we'll adjust things twice.

   So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource()
   conversion before passing it on to pci_claim_resource().

3) I was mistakedly __init'ing the function methods the PCI controller
   drivers provide on sparc64 to implement some parts of these
   routines.  This was, of course, easy to fix.

So we end up with the following, and that nasty SPARC64 makefile
ifdef in drivers/pci/Makefile is finally zapped.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:25 -07:00
David S. Miller
864ae18007 [SPARC64]: Fix IRQ retry interval timer value on sparc64 PCI controllers.
Use '5' instead of 'infinity'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 15:58:19 -07:00
David S. Miller
9fba62a59c [SPARC64]: Small Schizo PCI controller programming tweaks.
Use macro instead of magic value for Tomatillo discard-
timeout interrupt enable register bit.

Leave OBP programming PTO value unless Tomatillo and
version >= 0x2.

If no-bus-parking property is present, explicitly clear
PCICTRL_PARK bit.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 14:53:33 -07:00
David S. Miller
bb6743f4f0 [SPARC64]: Do proper DMA IRQ syncing on Tomatillo
This was the main impetus behind adding the PCI IRQ shim.

In order to properly order DMA writes wrt. interrupts, you have to
write to a PCI controller register, then poll for that bit clearing.
There is one bit for each interrupt source, and setting this register
bit tells Tomatillo to drain all pending DMA from that device.

Furthermore, Tomatillo's with revision less than 4 require us to do a
block store due to some memory transaction ordering issues it has on
JBUS.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 13:26:04 -07:00
David S. Miller
7c963ad1d1 [SPARC64]: Fix streaming buffer flushing on PCI and SBUS.
Firstly, if the direction is TODEVICE, then dirty data in the
streaming cache is impossible so we can elide the flush-flag
synchronization in that case.

Next, the context allocator is broken.  It is highly likely
that contexts get used multiple times for different dma
mappings, which confuses the strbuf flushing code and makes
it run inefficiently.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-31 16:57:59 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00