Commit Graph

481 Commits

Author SHA1 Message Date
Horst Schirmeier
e853534e6b [SERIAL] typo: buad -> baud
Replacing mistyped "buad" with "baud" where applicable.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-05 10:45:30 +01:00
Lennert Buytenhek
a77bc69138 [ARM] 3539/1: ixp23xx: fix __arch_ixp23xx_is_coherent() for A1 stepping
Patch from Lennert Buytenhek

The current __ixp23xx_arch_is_coherent() check assumes that the
lower byte of IXP23XX_PRODUCT_ID is identical to the lower byte of
processor_id, but this is not the case, and because of this we were
incorrectly enabling coherency on A1 stepping CPUs.

Stepping A1 of the ixp2350, which has a PRODUCT_ID of 0x401, has '02'
in the lower byte of processor_id, while A2, with a PRODUCT_ID of
0x402, has '04' in the lower byte of processor_id.

So, to check for >= A2, we really need to check the lower byte of
processor_id against >= 4.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-02 19:51:50 +01:00
Deepak Saxena
5cedae9ca7 [PATCH] ARM: Fix XScale PMD setting
The ARM Architecture Reference Manual lists bit 4 of the PMD as "implementation
defined" and it must be set to zero on Intel XScale CPUs or the cache does
not behave properly. Found by Mike Rapoport while debugging a flash issue
on the PXA255:

	http://marc.10east.com/?l=linux-arm-kernel&m=114845287600782&w=1

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-31 16:27:44 -07:00
Stephen Street
5daa3ba0c6 [PATCH] pxa2xx-spi update
Fix some outstanding issues with the pxa2xx_spi driver when running on a
PXA270:

- Wrong timeout calculation in the setup function due to different
  peripheral clock rates in the PXAxxx family.

- Bad handling of SSSR_TFS interrupts in interrupt_transfer function.

- Added locking to interface between the pump_messages workqueue and the
  pump_transfers tasklet.

Much thanks to Juergen Beisert for the extensive testing on the PXA270.

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:20 -07:00
Ben Dooks
7fba53402e [PATCH] S3C24XX: hardware SPI driver
Hardware based SPI driver for Samsung S3C24XX SoC systems

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:19 -07:00
Ben Dooks
1fc7547d4b [PATCH] S3C24XX: GPIO based SPI driver
SPI driver for SPI by GPIO on the Samsung S3C24XX series of SoC processors.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:19 -07:00
Catalin Marinas
c2a4c40651 [ARM] 3533/1: Implement the __raw_(read|write)_can_lock functions on ARM
Patch from Catalin Marinas

Recent patches introduced the write_can_lock() call in the kernel/ptrace.c
file. Implement the __raw_* variants on ARM (SMP) as well.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-19 21:55:35 +01:00
Linus Torvalds
0c056c50a6 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/spi-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/spi-2.6:
  [PATCH] SPI: spi_bitbang: clocking fixes
  [PATCH] spi: Update to PXA2xx SPI Driver
  [PATCH] SPI: busnum == 0 needs to work
  [PATCH] SPI: devices can require LSB-first encodings
  [PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it
  [PATCH] SPI: Add David as the SPI subsystem maintainer
  [PATCH] SPI: spi bounce buffer has a minimum length
  [PATCH] SPI: spi whitespace fixes
  [PATCH] SPI: add PXA2xx SSP SPI Driver
  [PATCH] SPI: per-transfer overrides for wordsize and clocking
2006-05-16 15:18:26 -07:00
Stephen Street
e0c9905e87 [PATCH] SPI: add PXA2xx SSP SPI Driver
This driver turns a PXA2xx synchronous serial port (SSP) into a SPI master
controller (see Documentation/spi/spi_summary).  The driver has the following
features:

- Support for any PXA2xx SSP
- SSP PIO and SSP DMA data transfers.
- External and Internal (SSPFRM) chip selects.
- Per slave device (chip) configuration.
- Full suspend, freeze, resume support.

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:56 -07:00
Uwe Zeisberger
2ceec0c8c6 [ARM] 3517/1: move definition of PROC_INFO_SZ from procinfo.h to asm-offsets.h
Patch from Uwe Zeisberger

The symbol is only used in arch/arm/kernel/head-common.S.  This in turn
is included from arch/arm/kernel/head.S and arch/arm/kernel/head-nommu.S
which include asm-offsets.h .

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-16 11:39:30 +01:00
Bellido Nicolas
9a708becaf [ARM] 3506/1: aaec2000: debug-macro.S needs hardware.h
Patch from Bellido Nicolas

Include hardware.h in debug-macro.S, otherwise io_p2v is undefined.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-07 22:49:23 +01:00
Bellido Nicolas
201be92a42 [ARM] 3505/1: aaec2000: entry-macro.S needs asm/arch/irqs.h
Patch from Bellido Nicolas

Since git commit 2b78838842, entry-macro.S needs to include asm/arch/irqs.h

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-07 22:49:22 +01:00
Sascha Hauer
216251cff9 [ARM] 3501/1: i.MX: fix lowlevel debug macros
Patch from Sascha Hauer

This patch fixes the addruart macro to work with both mmu enabled and
disabled.

Signed-off-by: Sascha Hauer <s.hauer@pengutonix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-07 18:56:27 +01:00
Nicolas Pitre
568cb09b9d [ARM] 3495/1: EABI: undefine removed syscalls, but...
Patch from Nicolas Pitre

... but only for user space.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-05 22:35:05 +01:00
Nicolas Pitre
99532559dc [ARM] 3500/1: fix PXA27x DMA allocation priority
Patch from Nicolas Pitre

Intel PXA27x developers manual section 5.4.1.1 lists a priority
distribution for the DMA channels differently than what the code
currently assumes.  This patch fixes that.

Noticed by Simon Vogl <vogl@soft.uni-linz.ac.at>

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-05 22:32:24 +01:00
Nicolas Pitre
ff10952a54 [ARM] 3494/1: asm-arm/bug.h needs linux/stddef.h
Patch from Nicolas Pitre

... for the definition of NULL.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-05 15:11:14 +01:00
Sascha Hauer
5b80234435 [ARM] 3490/1: i.MX: move uart resources to board files
Patch from Sascha Hauer

This patch moves the i.MX uart resources and the gpio pin setup to the
board files. This allows the boards to decide how many internal uarts
are connected to the outside world and whether they use rts/cts or
not.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-04 14:07:42 +01:00
Deepak Saxena
76bbb00288 [ARM] 3487/1: IXP4xx: Support non-PCI systems
Patch from Deepak Saxena

This patch allows for the addition of IXP4xx systems that do not make
use of the PCI interface by moving the CONFIG_PCI symbol selection to
be platform-specific instead of for all of IXP4xx. If at least one machine
with PCI support is built, the PCI code will be compiled in, but when
building !PCI, this will drastically shrink the kernel size.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 15:34:29 +01:00
Markus Gutschke
cd95842ca0 [ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macros
Patch from Markus Gutschke

In order to prevent gcc from making incorrect optimizations, all asm()
statements that define system calls should report memory as
clobbered. Recent versions of the headers for i386 have been changed
accordingly, but the ARM headers are still defective.

This patch fixes the bug tracked at
http://bugzilla.kernel.org/show_bug.cgi?id=6205

Signed-off-by: Markus Gutschke <markus@google.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 15:34:29 +01:00
Linus Torvalds
63d39fe88f Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3477/1: ARM EABI: undefine removed syscalls
  [ARM] 3475/1: S3C2410: fix spelling mistake in SMDK partition table
  [ARM] 3474/1: S3C2440: USB rate writes wrong var to CLKDIVN
2006-04-15 16:01:39 -07:00
Nicolas Pitre
463b158aab [ARM] 3477/1: ARM EABI: undefine removed syscalls
Patch from Nicolas Pitre

Avoid confusion for libraries assuming that a given syscall is available
when corresponding symbol is defined.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-15 16:10:43 +01:00
Ben Dooks
54bdc47010 [PATCH] S3C24XX GPIO LED support
GPIO LED support for Samsung S3C24XX SoC series processors.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:40 -07:00
Yasunori Goto
c80d79d746 [PATCH] Configurable NODES_SHIFT
Current implementations define NODES_SHIFT in include/asm-xxx/numnodes.h for
each arch.  Its definition is sometimes configurable.  Indeed, ia64 defines 5
NODES_SHIFT values in the current git tree.  But it looks a bit messy.

SGI-SN2(ia64) system requires 1024 nodes, and the number of nodes already has
been changeable by config.  Suitable node's number may be changed in the
future even if it is other architecture.  So, I wrote configurable node's
number.

This patch set defines just default value for each arch which needs multi
nodes except ia64.  But, it is easy to change to configurable if necessary.

On ia64 the number of nodes can be already configured in generic ia64 and SN2
config.  But, NODES_SHIFT is defined for DIG64 and HP'S machine too.  So, I
changed it so that all platforms can be configured via CONFIG_NODES_SHIFT.  It
would be simpler.

See also: http://marc.theaimsgroup.com/?l=linux-kernel&m=114358010523896&w=2

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:39 -07:00
Catalin Marinas
bb54a335ae [ARM] 3472/1: Use the D variants of FLDMIA/FSTMIA on ARMv6
Patch from Catalin Marinas

The X variants are deprecated starting with ARMv6. Using the D variants,
the fpmx_state in vfp_hard_struct is no longer needed.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-10 21:32:42 +01:00
Lennert Buytenhek
9323557975 [ARM] 3459/1: ixp23xx: fix debug serial macros for big-endian operation
Patch from Lennert Buytenhek

The debug-8250 macros do byte accesses, which means that if we're in
big-endian mode, we need to logically OR the UART address with 3, as
the LSB byte lane (where UART data and status is transferred) has the
highest byte address in the word when we are in big-endian mode.

It's unclear why this problem didn't surface earlier.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-09 22:20:57 +01:00
Russell King
f1dc24d53e [ARM] ebsa110: Fix incorrect serial port address
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-07 13:23:48 +01:00
Russell King
6e29ebad0f [ARM] Fix ebsa110 debug macros
Was including debug-8250.h rather than debug-8250.S

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-07 13:23:37 +01:00
Russell King
74d02fb954 [ARM] Move FLUSH_BASE macros to asm/arch/memory.h
FLUSH_BASE must be visible to arch/arm/mm/init.c in order for the
memory region to be setup.  Move these definitions from
asm-arm/arch-*/hardware.h into asm-arm/arch-*/memory.h where mm
stuff can see them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-07 13:22:21 +01:00
Russell King
7d12963757 [ARM] Remove unnecessary extra parens in include/asm-arm/memory.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-04 16:25:47 +01:00
KAMEZAWA Hiroyuki
0da323505f [ARM] arm's arch_local_page_offset() fix against 2.6.17-rc1
This patch fixes arch_local_page_offset(pfn,nid) in arm.
This new one (added by unify_pfn_to_page patches) is obviously buggy.

This macro calculate page offset in a node.

Note: about LOCAL_MAP_NR()
comment in arm's sub-archs says...

 /*
  * Given a kaddr, LOCAL_MAP_NR finds the owning node of the memory
  * and returns the index corresponding to the appropriate page in the
  * node's mem_map.
  */

but LOCAL_MAP_NR() is designed to be able to take both paddr and kaddr.
In this case, paddr is better.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitu.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-04 16:06:00 +01:00
Linus Torvalds
1810b6cb16 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (27 commits)
  [ARM] 3433/1: ARM: OMAP: 8/8 Update board files
  [ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2
  [ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2
  [ARM] 3430/1: ARM: OMAP: 5/8 Update PM
  [ARM] 3429/1: ARM: OMAP: 4/8 Update GPIO
  [ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexing
  [ARM] 3427/1: ARM: OMAP: 2/8 Update timers
  [ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework
  [ARM] 3396/2: AT91RM9200 Platform devices update
  [ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selection
  [ARM] 3393/2: AT91RM9200 LED support
  [ARM] 3453/1: Poodle: Correctly set the memory size
  [ARM] 3446/1: i.MX: MMC/SD SDHC controller registration for i.MX/MX1 MX1ADS board
  [ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1
  [ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platform
  [ARM] 3450/1: ep93xx: use the ep93xx rtc driver
  [ARM] 3452/1: [S3C2410] RX3715 - add nand information
  [ARM] 3449/1: [S3C2410] Anubis - fix NAND timings
  [ARM] 3448/1: [S3C2410] Settle delay when _enabling_ USB PLL
  [ARM] 3442/1: [S3C2410] SMDK: NAND device setup
  ...
2006-04-02 13:34:00 -07:00
Linus Torvalds
ef7a4567dc Merge master.kernel.org:/home/rmk/linux-2.6-mmc
* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1
  [ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)
2006-04-02 13:32:55 -07:00
Linus Torvalds
86dca4f8e6 Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits)
  [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error)
  [PATCH] pcmcia: fix pcmcia_device_remove oops
  [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45
  [PATCH] pcmcia: pseudo device handling update
  [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present
  [PATCH] pcmcia: use bitfield instead of p_state and state
  [PATCH] pcmcia: remove unused p_dev->state flags
  [PATCH] pcmcia: make pcmcia_release_{io,irq} static
  [PATCH] pcmcia: add return value to _config() functions
  [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
  [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
  [PATCH] pcmcia: rename pcmcia_device.state
  [PATCH] pcmcia: remove unneeded Vcc pseudo setting
  [PATCH] pcmcia: remove export of pcmcia_release_configuration
  [PATCH] pcmcia: default suspend and resume handling
  [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq
  [PATCH] pcmcia: add pcmcia_disable_device
  [PATCH] serial_cs: add Merlin U630 IDs
  [PATCH] pcmcia: AT91RM9200 Compact Flash driver
  [PATCH] pcmcia: socket.functions starts with 1
  ...
2006-04-02 12:49:59 -07:00
Pavel Pisa
56ca904053 [ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1
Patch from Pavel Pisa

This patch adds support of i.MX/MX1 SD/MMC controller.
It has been significantly redesigned from the original Sascha Hauer's
version to support scatter-gather DMA, to conform to latest Pierre Ossman's
and Russell King's MMC-SD Linux 2.6.x infrastructure.
The handling of all events has been moved to the softirq context
and is designed with no busy-looping in mind. Unfortunately
some controller bugs has to be overcome by limited looping
about 2-20 usec but these are observed only for initial card
recognition phase.

There are still some missing/missed IRQs problems under heavy load.
Help of somebody with access to the full SDHC design information
is probably necessary.

Regenerated against 2.6.16-git-060402 to solve clash with other patches.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 19:27:07 +01:00
Andrew Victor
65dbf34393 [ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)
Patch from Andrew Victor

This patch adds support for the MMC/SD card interface on the Atmel
AT91RM9200 processor.

Original driver was by Nick Randell, but a number of people have
subsequently worked on it. It's currently maintained by Malcolm Noyes.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 19:18:51 +01:00
Tony Lindgren
9b6553cd01 [ARM] 3433/1: ARM: OMAP: 8/8 Update board files
Patch from Tony Lindgren

This patch syncs OMAP board support with linux-omap tree.
The highlights of the patch are:
- Add support for Nokia 770 by Juha Yrjola
- Add support for Samsung Apollon by Kyungmin Park
- Add support for Amstrad E3 videophone by Jonathan McDowell
- Remove board-netstar.c board support as requested by Ladislav Michl
- Do platform_device registration in board files by Komal Shah et al.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:46:30 +01:00
Tony Lindgren
120db2cba8 [ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2
Patch from Tony Lindgren

Update misc OMAP core code from linux-omap tree:

- McBSP updates by Samuel Ortiz, Andrzej Zaborowski
- Whitespace cleanups by Ladislav Michl
- Other fixes by various linux-omap developers

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:46:27 +01:00
Tony Lindgren
0dc5e77c46 [ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2
Patch from Tony Lindgren

Update OMAP framebuffer low-level init code from linux-omap tree
by Imre Deak.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:46:26 +01:00
Tony Lindgren
670c104ae8 [ARM] 3430/1: ARM: OMAP: 5/8 Update PM
Patch from Tony Lindgren

Update OMAP PM code from linux-omap tree:

- Move PM code from plat-omap to mach-omap1 and mach-omap2
  by Tony Lindgren
- Add minimal PM support for omap24xx by Tony Lindgren and
  Richard Woodruff
- Misc updates to omap1 PM code by Tuukka Tikkanen et al
- Updates to the SRAM code needed for PM and FB by Imre Deak

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:46:25 +01:00
Tony Lindgren
8d7f9f5037 [ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexing
Patch from Tony Lindgren

Update OMAP pin multiplexing code from linux-omap tree.
This patch adds new pin configurations by various OMAP
developers, and suport for omap730 by Brian Swetland.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:46:22 +01:00
Tony Lindgren
a569c6ec37 [ARM] 3427/1: ARM: OMAP: 2/8 Update timers
Patch from Tony Lindgren

Update OMAP timers from linux-omap tree. The highlights of the
patch are:

- Move timer32k code from mach-omap1 to plat-omap and make it
  work also on omap24xx by Tony Lindgren
- Add support for dmtimer idle check for PM by Tuukka Tikkanen

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:46:21 +01:00
Tony Lindgren
b824efae12 [ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework
Patch from Tony Lindgren

Update OMAP clock framework from linux-omap tree.
The highlights of the patch are:

- Add support for omap730 clocks by Andrzej Zaborowski
- Fix compile warnings by Dirk Behme
- Add support for using dev id by Tony Lindgren and Komal Shah
- Move memory timings and PRCM into separate files by Tony Lindgren

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:46:20 +01:00
Andrew Victor
3267c077e5 [ARM] 3396/2: AT91RM9200 Platform devices update
Patch from Andrew Victor

This patch updates the platform device resources for the Ethernet and
MMC peripherals.  It also adds platform device information for the NAND
(SmartMedia), I2C and the RTC.

(This version of the patch can be applied before Patch 3392/1)

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:15:51 +01:00
Andrew Victor
cc2832a131 [ARM] 3393/2: AT91RM9200 LED support
Patch from Andrew Victor

This patch adds support for the LED(s) on the AT91RM9200-based boards.

(This version of the patch can be applied before Patch 3392/1)

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:15:48 +01:00
Pavel Pisa
999331af45 [ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1
Patch from Pavel Pisa

This patch contains simplified set of changes to add scatter-gather
emulation capability into MX1 DMA support. The result should
be still usable for next combination of DMA transfers
  Statter-Gather/linear/2D/FIFO to linear/2D/FIFO and
  linear/2D/FIFO to Statter-Gather/2D/FIFO
The patch corrects channel priority allocation to be compatible
with MX1 hardware implementation.
Previous code has not been adapted from its PXA original.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 16:58:37 +01:00
Lennert Buytenhek
7ba01f9728 [ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platform
Patch from Lennert Buytenhek

Instantiate the recently merged m48t86 rtc driver in the ts72xx code.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 16:17:40 +01:00
Ben Dooks
26f91fd54d [ARM] 3443/1: [S3C2410] Improve IRQ entry code
Patch from Ben Dooks

Remove the old debug from the IRQ entry code,
update the comments on the handling of the
IRQ registers.

The message "bad interrupt offset" is removed
as it is only helpful for debugging, and can
cause printk() flooding when under load.

Make the code to deal with GPIO interrupts
faster, and use the same path to deal with
unexplained results from the IRQ registers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 00:09:26 +01:00
Lennert Buytenhek
23759dc643 [ARM] 3439/2: xsc3: add I/O coherency support
Patch from Lennert Buytenhek

This patch adds support for the I/O coherent cache available on the
xsc3.  The approach is to provide a simple API to determine whether the
chipset supports coherency by calling arch_is_coherent() and then
setting the appropriate system memory PTE and PMD bits.  In addition,
we call this API on dma_alloc_coherent() and dma_map_single() calls.
A generic version exists that will compile out all the coherency-related
code that is not needed on the majority of ARM systems.

Note that we do not check for coherency in the dma_alloc_writecombine()
function as that still requires a special PTE setting.  We also don't
touch dma_mmap_coherent() as that is a special ARM-only API that is by
definition only used on non-coherent system.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 00:07:39 +01:00
Lennert Buytenhek
532bda5d9c [ARM] 3438/1: ixp23xx: add pci slave support
Patch from Lennert Buytenhek

On the Double Espresso board, the IXP2350s are PCI slave devices and
we skip calling pci_common_init() as that enumerates the bus.  But even
though we are a PCI slave device, there is still some PCI-related setup
that has to be done.

Create ixp23xx_pci_common_init(), move the common initialisation bits
there, and have this function called from both the PCI master and the
PCI slave init path.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01 18:33:35 +01:00
Linus Torvalds
5b67e8dd5a Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3424/2: ixp23xx: fix uncompress.h for recent CRLF decompressor change
  [ARM] 3434/1: pxa i2s amsl define
  [ARM] 3425/1: xsc3: need to include pgtable-hwdef.h
  [ARM] Allow un-muxed syscalls to be available for everyone
  [ARM] 3420/1: Missing clobber in example code
  [ARM] nommu: fixups for the exception vectors
  [ARM] nommu: add nommu specific Kconfig and MMUEXT variable in Makefile
  [ARM] nommu: start-up code
  [ARM] nommu: MPU support in boot/compressed/head.S
2006-03-31 21:33:07 -08:00