Commit Graph

53 Commits

Author SHA1 Message Date
Lothar Wassmann
a9d43091c5 USB: NXP ISP1362 USB host driver
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:30 -07:00
Wan ZongShun
586dfc8caf USB: Add nuvoton Ehci driver for w90p910 platform
Add ehci support for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:20 -07:00
Magnus Damm
719a72b7c7 usb: r8a66597-hcd platform data on_chip support
Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.

This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-20 04:27:10 +09:00
Arnd Bergmann
45e83889eb USB: buildfix ppc randconfig
We could just make the USB_OHCI_HCD_PPC_OF option implicit
and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
and USB_OHCI_HCD_PPC_OF_LE are set.

[ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12 15:16:37 -07:00
Magnus Damm
64614e66fb usb: allow sh7724 to enable on-chip r8a66597
The sh7724 processor has two on-chip r8a66597 blocks, so add
it to the list of processors for SUPERH_ON_CHIP_R8A66597.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-05 00:23:50 +09:00
Paul Mundt
1b6ed69f97 USB: xhci depends on PCI.
While it looks like xhci was written with both PCI and non-PCI in mind,
apparently only the former has seen any testing. xhci-mem.o can be "fixed"
with a linux/dmapool.h include, but there are still parts of the code that
make use of struct pci_dev directly. So, at least more work is needed before
this can be turned on for non-PCI builds:

  CC      drivers/usb/host/xhci-mem.o
drivers/usb/host/xhci-mem.c: In function 'xhci_segment_alloc':
drivers/usb/host/xhci-mem.c:45: error: implicit declaration of function 'dma_pool_alloc'
drivers/usb/host/xhci-mem.c:45: warning: assignment makes pointer from integer without a cast
drivers/usb/host/xhci-mem.c: In function 'xhci_segment_free':
drivers/usb/host/xhci-mem.c:67: error: implicit declaration of function 'dma_pool_free'
drivers/usb/host/xhci-mem.c: In function 'xhci_alloc_virt_device':
drivers/usb/host/xhci-mem.c:239: warning: assignment makes pointer from integer without a cast
drivers/usb/host/xhci-mem.c:248: warning: assignment makes pointer from integer without a cast
drivers/usb/host/xhci-mem.c: In function 'xhci_mem_cleanup':
drivers/usb/host/xhci-mem.c:578: error: implicit declaration of function 'dma_pool_destroy'
drivers/usb/host/xhci-mem.c: In function 'xhci_mem_init':
drivers/usb/host/xhci-mem.c:657: error: implicit declaration of function 'dma_pool_create'
drivers/usb/host/xhci-mem.c:658: warning: assignment makes pointer from integer without a cast
drivers/usb/host/xhci-mem.c:663: warning: assignment makes pointer from integer without a cast
make[3]: *** [drivers/usb/host/xhci-mem.o] Error 1

  CC      drivers/usb/host/xhci-pci.o
drivers/usb/host/xhci-pci.c: In function 'xhci_pci_reinit':
drivers/usb/host/xhci-pci.c:39: error: implicit declaration of function 'pci_set_mwi'
drivers/usb/host/xhci-pci.c: At top level:
drivers/usb/host/xhci-pci.c:151: error: 'usb_hcd_pci_probe' undeclared here (not in a function)
drivers/usb/host/xhci-pci.c:152: error: 'usb_hcd_pci_remove' undeclared here (not in a function)
drivers/usb/host/xhci-pci.c:155: error: 'usb_hcd_pci_shutdown' undeclared here (not in a function)
drivers/usb/host/xhci-pci.c:159: warning: function declaration isn't a prototype
drivers/usb/host/xhci-pci.c:164: warning: function declaration isn't a prototype
make[3]: *** [drivers/usb/host/xhci-pci.o] Error 1

Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:51 -07:00
Sarah Sharp
eb6bab138d USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries.
Add Makefile and Kconfig entries for the xHCI host controller driver.
List Sarah Sharp as the maintainer for the xHCI driver.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:51 -07:00
Catalin Marinas
f7e7aa5850 USB: Add platform device support for the ISP1760 USB chip
Currently, the driver only supports PCI and PPC_OF but there are
boards like ARM RealView where this is a platform device. The patch adds
the necessary functions and registration to the isp1760-if.c file and
modifies the corresponding Makefile and Kconfig to be able to use this
driver even if PCI and PPC_OF are not enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:31 -07:00
Thierry Vignaud
b967c88ed1 usb: kill prehistorical comments about USB_EHCI_HCD
Remove old comments about USB_EHCI_HCD.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:31 -07:00
Anton Vorontsov
236dd4d18f USB: Driver for Freescale QUICC Engine USB Host Controller
This patch adds support for the FHCI USB controller, as found
in the Freescale MPC836x and MPC832x processors. It can support
Full or Low speed modes.

Quite a lot the hardware is doing by itself (SOF generation, CRC
generation and checking), though scheduling and retransmission is on
software's shoulders.

This controller does not integrate the root hub, so this driver also
fakes one-port hub. External hub is required to support more than
one device.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27 16:15:38 -08:00
David Brownell
2bf5fa13fc USB: omap1 ohci buildfix (otg related)
> > drivers/built-in.o: In function `ohci_omap_init':
 > > hid-quirks.c:(.text+0x6c608): undefined reference to `otg_get_transceiver'
 > > drivers/built-in.o: In function `omap_udc_probe':
 > > hid-quirks.c:(.init.text+0x34c0): undefined reference to `otg_get_transceiver'
 > > hid-quirks.c:(.init.text+0x3d40): undefined reference to `otg_put_transceiver'

Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27 16:15:32 -08:00
Rodolfo Giometti
b92a78e582 usb host: Oxford OXU210HP HCD driver.
This driver implements the support for Oxford OXU210HP USB high-speed host,
no peripheral nor OTG.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: Kan Liu <kan.k.liu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:50 -08:00
Sebastian Andrzej Siewior
ff30bf1ca4 USB: remove optional bus bindings in isp1760, fixing runtime warning
Roland Reported the following:
| kmem_cache_create: duplicate cache isp1760_qtd
| Pid: 461, comm: modprobe Tainted: G        W  2.6.28-rc2-git3-default #4
| Call Trace:
|  [<c017540e>] kmem_cache_create+0xc9/0x3a3
|  [<c0159a8d>] free_pages_bulk+0x16c/0x1c9
|  [<f165c05f>] isp1760_init+0x0/0xb [isp1760]
|  [<f165c018>] init_kmem_once+0x18/0x5f [isp1760]
|  [<f165c064>] isp1760_init+0x5/0xb [isp1760]
|  [<c010113d>] _stext+0x4d/0x148
|  [<c0142936>] load_module+0x12cd/0x142e
|  [<c01743c4>] kmem_cache_destroy+0x0/0xd7
|  [<c0142b1e>] sys_init_module+0x87/0x176
|  [<c01039eb>] sysenter_do_call+0x12/0x2f

The reason, is that ret is initialized with ENODEV instead of 0 _or_
the kmem cache is not freed in error case with no bus binding.

The difference between OF+PCI and OF only is
| 15148     804      32   15984    3e70 isp1760-of-pci.o
| 13748     676       8   14432    3860 isp1760-of.o

about 1.5 KiB.

Until there is a checkbox where the user *must* select atleast one item,
and may select multiple entries I don't make it selectable anymore.
Having a driver which can't be used under any circumstances is broken
anyway and I've seen distros shipping it that way.

Reported-by: Roland Kletzing <devzero@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>a
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 14:45:03 -08:00
Linus Torvalds
a27028349c Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: don't rebind drivers after failed resume or reset
  USB: fix memory leak in cdc-acm
  USB: Unusual dev for Mio moov 330 gps
  USB: cdc-wdm: make module autoload work
  USB: Fix unneeded endpoint check in pxa27x_udc
  usb/gadget: fix kernel-doc warning
  USB: Speedtouch: add pre_reset and post_reset routines
  USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative
  USB: support Huawei data card product IDs
  USB: add ZTE MF626 USB GSM modem entry
  USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge
  USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc
  USB: ohci: add support for tmio-ohci cell
2008-10-23 10:09:50 -07:00
Dmitry Baryshkov
78c73414f4 USB: ohci: add support for tmio-ohci cell
Some Toshiba Mobile I/O chips have OHCI controller built in.
E.g. the tc6393xb chip found in several Toshiba e-Series PDAs
and in Sharp Zaurus SL-6000 PDA. This adds platform glue
to support OHCI function of the chip.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Ian Molton <spyro@f2s.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22 10:05:27 -07:00
David Vrabel
6a7c3e464e uwb: depend on EXPERIMENTAL
The UWB stack has some sysfs APIs that will change thus it's best
marked as EXPERIMENTAL until these APIs are finalized.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:36 +01:00
Inaky Perez-Gonzalez
d09318b8ab wusb: add HWA host controller driver
Add a driver for Wireless USB host controllers connected via USB (a
Host Wire Adapter or HWA).

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:31 +01:00
David Vrabel
7e6133aa42 wusb: WHCI host controller driver
A driver for Wireless USB host controllers that comply with the
Wireless Host Controller Interface (HCI) specification as published by
Intel.

The latest publically available version of the specification (0.95) is
supported (except for isochronous transfers).

Build fixes by Randy Dunlap <rdunlap@xenotime.net>

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:31 +01:00
Yoshihiro Shimoda
77d11ba993 usb: r8a66597-hcd: Add support for SH7723 USB host
R8A66597 is similar to SH7723 USB 2.0 Host/Function module.
In addition, the USB of SH7366 is compatible with SH7723.
It can support SH7723 USB host by changing Kconfig.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09 16:04:12 +09:00
David S. Miller
3eb6753e20 usb: Sparc build fix, make USB_ISP1760_OF depend on PPC_OF
Sparc doesn't have some of the OF interfaces this driver
wants to use.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-06 15:15:12 -07:00
Peter Korsgaard
e9b29ffc51 USB: add Cypress c67x00 OTG controller HCD driver
This patch adds HCD support for the Cypress c67x00 family of devices.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02 10:25:57 -07:00
Sebastian Siewior
db11e47dd7 USB: ISP1760 HCD driver
This driver has been written from scratch and supports the ISP1760. ISP1761
might (should) work as well but the OTG isn't supported. Also ISO packets are
not. However, it works on my little PowerPC board.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02 10:25:50 -07:00
Yoshihiro Shimoda
9424ea2965 USB: r8a66597-hcd: Add support for SH7366 USB host
R8A66597 is similar to SH7366 USB 2.0 Host/Function module. It can
support SH7366 USB host by changing several R8A66597 code.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24 21:16:49 -07:00
Robert P. J. Day
9ec249a658 USB: Remove EXPERIMENTAL designation from USB_EHCI_ROOT_HUB_TT.
According to David Brownell, this feature doesn't require an
experimental designation any longer.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24 21:16:43 -07:00
Anton Vorontsov
b5937a415f ehci-fsl: add PPC_MPC837x to default y
This patch converts USB_EHCI_FSL config option into the verbose
bool, so we'll able to select it for other freescale processors
with built-in EHCI controller.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:56 -08:00
Peter Korsgaard
618b886705 USB: ehci-fsl: mpc834x config symbol is PPC_MPC834x, not MPC834x
The config symbol for mpc834x processors is CONFIG_PPC_MPC834x,
not CONFIG_MPC834x.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:38:50 -08:00
David Brownell
aa16ca307e USB: ehci: minor ISO updates, always support split ISO
Small updates to the EHCI driver's ISO support:

 - Get rid of the Kconfig option for full speed ISO.  It may
   not be perfect yet, but it hasn't appeared to be dangerous
   and pretty much every configuration wants it.

 - Instead of two places to disable an empty periodic schedule
   after an ISO transfer completes, just have one.

 - After the periodic schedule is disabled, we can short-circuit
   the schedule scan ... it can't possibly have more work to do.

Assuming a typical config with split iso enabled, the only change
in behavior should be almost unobservable:  quicker termination
of periodic scans when the schedule gets emptied.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:02 -08:00
Vladimir Barinov
91bc4d31e8 USB: add ehci-ixp bus glue
EHCI Glue driver for Intel IXP4XX EHCI USB controller

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:02 -08:00
Valentine Barshak
da0e8fb00b USB: add ehci-ppc-of bus glue (device-tree aware)
This adds device-tree-aware ehci-ppc-of driver.
The code is based on the ehci-ppc-soc driver by
Stefan Roese <sr@denx.de>.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:35:01 -08:00
David Brownell
e057a35aa1 USB: fix HCD Kconfig goofage
Add a missing dependency which goofs up the xconfig display.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:59 -08:00
Adrian Bunk
1011b326b1 USB: fix USB_OHCI_HCD_SSB dependencies
This patch fixes a bug introduced by
commit b22817b3c8.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 13:58:32 -08:00
Ingo Molnar
b22817b3c8 USB: fix ssb_ohci_probe() build bug
fix ssb_ohci_probe() build bug:

 drivers/built-in.o: In function `ssb_ohci_probe':
 ohci-hcd.c:(.text+0xbff39): undefined reference to `ssb_device_enable'
 ohci-hcd.c:(.text+0xbff6f): undefined reference to `ssb_admatch_base'
 ohci-hcd.c:(.text+0xbff8b): undefined reference to `ssb_admatch_size'
 ohci-hcd.c:(.text+0xbffe5): undefined reference to `ssb_device_disable'
 [...]

the reason was that this Kconfig combination was allowed:

 CONFIG_SSB=m
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_SSB=y

the fix is to require a modular USB_OHCI_HCD build when SSB is modular.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25 12:18:44 -07:00
Michael Buesch
c604e85148 USB: ohci SSB bus glue
This adds SSB bus glue for the USB OHCI HCD. 

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:55:33 -07:00
M4rkusXXL
fa0de2b614 usb: typo in usb R8A66597 HCD config
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:27:49 -07:00
Li Yang
ba02978a48 USB: ehci_fsl update for MPC831x support
For MPC831x support, change the ehci-fsl driver to preserve
bits set in platform code.  Add a common CONFIG_USB_EHCI_FSL
to indicate presence of Freescale EHCI SOC.  Add FSL_USB2_DR_OTG
operating mode support, thus both host and device can work for the
mini-ab receptacle.  Note: this doesn't enable OTG protocol
support.

Signed-off-by: Li Yang <leoli@freescale.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12 16:29:50 -07:00
Stefan Roese
4d68c0be69 USB: Set CONFIG_USB_EHCI_BIG_ENDIAN_MMIO/_DESC in usb/host/Kconfig
Now select the big-endian configuration options
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO and CONFIG_USB_EHCI_BIG_ENDIAN_DESC in
the usb host Kconfig file and not in the platform Kconfig files.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12 16:29:50 -07:00
Yoshihiro Shimoda
5d3043586d USB: r8a66597-hcd: host controller driver for R8A66597
I would like to submit Renesas R8A66597 USB HCD driver.

R8A66597 is Renesas USB 2.0 host and peripheral combined
controller device originally designed for embedded products.
As a limitation of this device, it does not support externel
hub more than 2 tier, and cannot communicate with a USB
device more than 10. Then this device is not compatible with
EHCI and/or OHCI, I wrote driver support patch based on
sl811 code.

This driver has the following unique specifications:
- Implement transfer timeout to share one pipe with plural endpoint.
- Detach detection of a USB device connected to externel hub.

The driver has been tested external hub, usb-hdd, usb-cdrom,
usb-speaker, mice, keyboard, and usbtest driver.

Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12 16:29:45 -07:00
Stefan Roese
6dbd682b7c USB: EHCI support for big-endian descriptors
This patch implements supports for EHCI controllers whose in-memory
data structures are represented in big-endian format. This is needed
(unfortunately) for the AMCC PPC440EPx SoC EHCI controller; the EHCI
spec doesn't specify little-endian format, although that's what most
other implementations use.

The guts of the patch are to introduce the hc32 type and change all
references from le32 to hc32.  All access routines are converted from
cpu_to_le32(...) to cpu_to_hc32(ehci, ...) and similar for the other
"direction".  (This is the same approach used with OHCI.)

David fixed:
	Whitespace fixes; refresh against ehci cpufreq patch; move glue
	for that PPC driver to the patch adding it; fix free symbol
	capture bugs in modified "constant" macros; and make "hc32" etc
	be "le32" unless we really need the BE options, so "sparse" can
	do some real good.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12 16:29:45 -07:00
Sylvain Munaut
495a678fc6 ohci: Add support for OHCI controller on the of_platform bus
PPC embedded systems can have a ohci controller builtin. In the
new model, it will end up as a driver on the of_platform bus,
this patches takes care of them.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:33 -08:00
Benjamin Herrenschmidt
083522d766 USB: Implement support for EHCI with big endian MMIO
This patch implements supports for EHCI controllers whose MMIO
registers are big endian and enables that functionality for
the Toshiba SCC chip. It does _not_ add support for big endian
in-memory data structures as this is not needed for that chip
and I hope it will never be.

The guts of the patch are to convert readl(...) to
ehci_readl(ehci, ...) and similarly for register writes.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:32 -08:00
Benjamin Herrenschmidt
11d1a4aa8d USB: Implement support for "split" endian OHCI
This patch separates support for big endian MMIO register access
and big endian descriptors in order to support the Toshiba SCC
implementation which has big endian registers but little endian
in-memory descriptors.

It simplifies the access functions a bit in ohci.h while at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:31 -08:00
Matt LaPlante
3cb2fccc5f Fix misc Kconfig typos
Fix various Kconfig typos.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 05:22:59 +01:00
Tony Olech
d774efeabc USB: u132-hcd: host controller driver for ELAN U132 adapter
This "u132-hcd" module is one half of the "driver" for
ELAN's U132 which is a USB to CardBus OHCI controller
adapter. This module needs the "ftdi-elan" module in
order to communicate to CardBus OHCI controller inserted
into the U132 adapter.

When the "ftdi-elan" module detects a supported CardBus
OHCI controller in the U132 adapter it loads this "u132-hcd"
module.

Upon a successful device probe() the single workqueue
is started up which does all the processing of commands
from the USB core that implement the host controller.

The workqueue maintains the urb queues and issues commands
via the functions exported by the "ftdi-elan" module. Each
such command will result in a callback.

Note that the "ftdi-elan" module is a USB client driver.

Note that this "u132-hcd" module is a (cut-down OHCI)
host controller.

Thus we have a topology with the parent of a host controller
being a USB client! This really stresses the USB subsystem
semaphore/mutex handling in the module removal.

Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 11:58:59 -07:00
Andrew Morton
26facdff1d USB: kill usb kconfig warning
drivers/usb/host/Kconfig:87:warning: 'select' used by config symbol 'USB_OHCI_HCD' refer to undefined symbol 'I2C_PNX'


Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 11:58:48 -07:00
Vitaly Wool
60bbfc84b6 USB OHCI controller support for PNX4008
inlined is the patch that adds basic support for USB OHCI controller
support for PNX4008 Philips PNX4008 ARM board. Due to HW design, it
depends on I2C driver for PNX4008 which I've recetnly posted to LKML and
i2c at lm-sensors.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 11:58:48 -07:00
Jean-Luc Leger
5a9d6e0632 [PATCH] clean up default value of USB_ISP116X_HCD, USB_SL811_HCD and USB_SL811_CS
Default values for boolean and tristate options can only be 'y', 'm' or 'n'.
This patch removes wrong default for USB_ISP116X_HCD, USB_SL811_HCD and
USB_SL811_CS.

Signed-off-by: Jean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:04 -07:00
Dan Streetman
ba47f66bd9 [PATCH] improved TT scheduling for EHCI
This updates the EHCI driver by adding an improved scheduler for the
transaction translators, found in USB 2.0 hubs and used for low and
full speed devices.

 - adds periodic_tt_usecs() and some helper functions, which does
   the same thing that "periodic_usecs" does, except on the other
   side of the TT, i.e.  it calculates the low/fullspeed bandwidth
   usage instead of highspeed.

 - adds a tt_available() function which is the new implementation
   of what tt_no_collision() does ... while tt_no_collision() ensures
   that each TT handles only 1 periodic transfer at a time (a very
   pessimistic approach) this version instead tracks bandwidth and
   allows each TT to handle as many transfers as will fit on each TT's
   downstream bus (closer to best-case).

The new scheduler is selected by a config option, marked as EXPERIMENTAL
so it can be tested (and more broadly reviewed) for a while until it
seems safe to remove the original scheduler.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Jordan Crouse
76fa9a240d [PATCH] USB: EHCI for AU1200
ALCHEMY:  Add EHCI support for AU1200

Updated by removing the OHCI support

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:49:55 -08:00
Randy Vinson
80cb9aee01 [PATCH] USB: EHCI for Freescale 83xx
Adding a Host Mode USB driver for the Freescale 83xx.

This driver supports both the Dual-Role (DR) controller and the
Multi-Port-Host (MPH) controller present in the Freescale MPC8349. It has
been tested with the MPC8349CDS reference system. This driver depends on
platform support code for setting up the pins on the device package in a
manner appropriate for the board in use. Note that this patch requires
selecting the EHCI controller option under the USB Host menu.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:49:55 -08:00
Jesper Juhl
b3c29d85bf Small fixups to the EHCI Kconfig help text
Here's a small patch with a few tiny fixups for the EHCI Kconfig help
text. Please consider applying.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-10 00:35:22 +01:00