Commit Graph

1741 Commits

Author SHA1 Message Date
Linus Torvalds
f891caf28f Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits)
  Revert "powerpc: Sync RPA note in zImage with kernel's RPA note"
  powerpc: Fix compile errors with CONFIG_BUG=n
  powerpc: Fix format string warning in arch/powerpc/boot/main.c
  powerpc: Fix bug in kernel copy of libfdt's fdt_subnode_offset_namelen()
  powerpc: Remove duplicate DMA entry from mpc8313erdb device tree
  powerpc/cell/OProfile: Fix on-stack array size in activate spu profiling function
  powerpc/mpic: Fix regression caused by change of default IRQ affinity
  powerpc: Update remaining dma_mapping_ops to use map/unmap_page
  powerpc/pci: Fix unmapping of IO space on 64-bit
  powerpc/pci: Properly allocate bus resources for hotplug PHBs
  OF-device: Don't overwrite numa_node in device registration
  powerpc: Fix swapcontext system for VSX + old ucontext size
  powerpc: Fix compiler warning for the relocatable kernel
  powerpc: Work around ld bug in older binutils
  powerpc/ppc64/kdump: Better flag for running relocatable
  powerpc: Use is_kdump_kernel()
  powerpc: Kexec exit should not use magic numbers
  powerpc/44x: Update 44x defconfigs
  powerpc/40x: Update 40x defconfigs
  powerpc: enable heap randomization for linkstations
  ...
2008-10-31 08:14:15 -07:00
Paul Mackerras
5663a1232b Revert "powerpc: Sync RPA note in zImage with kernel's RPA note"
This reverts commit 91a0030295, plus
commit 0dcd440120 ("powerpc: Revert CHRP
boot wrapper to real-base = 12MB on 32-bit") which depended on it.

Commit 91a00302 was causing NVRAM corruption on some pSeries machines,
for as-yet unknown reasons, so this reverts it until the cause is
identified.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 22:36:21 +11:00
Mark Nelson
f9226d572d powerpc: Update remaining dma_mapping_ops to use map/unmap_page
After the merge of the 32 and 64bit DMA code, dma_direct_ops lost
their map/unmap_single() functions but gained map/unmap_page().  This
caused a problem for Cell because Cell's dma_iommu_fixed_ops called
the dma_direct_ops if the fixed linear mapping was to be used or the
iommu ops if the dynamic window was to be used.  So in order to fix
this problem we need to update the 64bit DMA code to use
map/unmap_page.

First, we update the generic IOMMU code so that iommu_map_single()
becomes iommu_map_page() and iommu_unmap_single() becomes
iommu_unmap_page().  Then we propagate these changes up through all
the callers of these two functions and in the process update all the
dma_mapping_ops so that they have map/unmap_page rahter than
map/unmap_single.  We can do this because on 64bit there is no HIGHMEM
memory so map/unmap_page ends up performing exactly the same function
as map/unmap_single, just taking different arguments.

This has no affect on drivers because the dma_map_single_attrs() just
ends up calling the map_page() function of the appropriate
dma_mapping_ops and similarly the dma_unmap_single_attrs() calls
unmap_page().

This fixes an oops on Cell blades, which oops on boot without this
because they call dma_direct_ops.map_single, which is NULL.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:13:48 +11:00
Benjamin Herrenschmidt
b30115ea8f powerpc/pci: Fix unmapping of IO space on 64-bit
A typo/thinko made us pass the wrong argument to __flush_hash_table_range
when unplugging bridges, thus not flushing all the translations for
the IO space on unplug.  The third parameter to __flush_hash_table_range
is `end', not `size'.

This causes the hypervisor to refuse unplugging slots.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:13:46 +11:00
Nathan Fontenot
e90a131846 powerpc/pci: Properly allocate bus resources for hotplug PHBs
Resources for PHB's that are dynamically added to a system are not
properly allocated in the resource tree.

Not having these resources allocated causes an oops when removing
the PHB when we try to release them.

The diff appears a bit messy, this is mainly due to moving everything
one tab to the left in the pcibios_allocate_bus_resources routine.
The functionality change in this routine is only that the
list_for_each_entry() loop is pulled out and moved to the necessary
calling routine.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:12:03 +11:00
Jeremy Kerr
6098e2ee14 OF-device: Don't overwrite numa_node in device registration
Currently, the numa_node of OF-devices will be overwritten during
device_register, which simply sets the node to -1.  On cell machines,
this means that devices can't find their IOMMU, which is referenced
through the device's numa node.

Set the numa node for OF devices with no parent, and use the
lower-level device_initialize and device_add functions, so that the
node is preserved.

We can remove the call to set_dev_node in of_device_alloc, as it
will be overwritten during register.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:12:01 +11:00
Michael Neuling
16c29d180b powerpc: Fix swapcontext system for VSX + old ucontext size
Since VSX support was added, we now have two sizes of ucontext_t;
the older, smaller size without the extra VSX state, and the new
larger size with the extra VSX state.  A program using the
sys_swapcontext system call and supplying smaller ucontext_t
structures will currently get an EINVAL error if the task has
used VSX (e.g. because of calling library code that uses VSX) and
the old_ctx argument is non-NULL (i.e. the program is asking for
its current context to be saved).  Thus the program will start
getting EINVAL errors on calls that previously worked.

This commit changes this behaviour so that we don't send an EINVAL in
this case.  It will now return the smaller context but the VSX MSR bit
will always be cleared to indicate that the ucontext_t doesn't include
the extra VSX state, even if the task has executed VSX instructions.

Both 32 and 64 bit cases are updated.

[paulus@samba.org - also fix some access_ok() and get_user() calls]

Thanks to Ben Herrenschmidt for noticing this problem.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:12:00 +11:00
Michael Neuling
b160544ccc powerpc: Fix compiler warning for the relocatable kernel
Fixes this warning:
 arch/powerpc/kernel/setup_64.c:447:5: warning: "kernstart_addr" is not defined

which arises because PHYSICAL_START is no longer a constant when
CONFIG_RELOCATABLE=y.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:11:54 +11:00
Paul Mackerras
2a4b9c5af8 powerpc: Work around ld bug in older binutils
Commit 549e8152de ("powerpc: Make the
64-bit kernel as a position-independent executable") added lines to
vmlinux.lds.S to add the extra sections needed to implement a
relocatable kernel.  However, those lines seem to trigger a bug in
older versions of GNU ld (such as 2.16.1) when building a
non-relocatable kernel.  Since ld 2.16.1 is still a popular choice for
cross-toolchains, this adds an #ifdef to vmlinux.lds.S so the added
lines are only included when building a relocatable kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:11:52 +11:00
Milton Miller
8b8b0cc1c7 powerpc/ppc64/kdump: Better flag for running relocatable
The __kdump_flag ABI is overly constraining for future development.

As of 2.6.27, the kernel entry point has 4 constraints:  Offset 0 is
the starting point for the master (boot) cpu (entered with r3 pointing
to the device tree structure), offset 0x60 is code for the slave cpus
(entered with r3 set to their device tree physical id), offset 0x20 is
used by the iseries hypervisor, and secondary cpus must be well behaved
when the first 256 bytes are copied to address 0.

Placing the __kdump_flag at 0x18 is bad because:

- It was taking the last 8 bytes before the iseries hypervisor data.
- It was 8 bytes for a boolean flag
- It had no way of identifying that the flag was present
- It does leave any room for the master to add any additional code
  before branching, which hurts debug.
- It will be unnecessarily hard for 32 bit code to be common (8 bytes)

Now that we have eliminated the use of __kdump_flag in favor of
the standard is_kdump_kernel(), this flag only controls run without
relocating the kernel to PHYSICAL_START (0), so rename it __run_at_load.

Move the flag to 0x5c, 1 word before the secondary cpu entry point at
0x60.  Initialize it with "run0" to say it will run at 0 unless it is
set to 1.  It only exists if we are relocatable.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:11:49 +11:00
Milton Miller
62a8bd6c92 powerpc: Use is_kdump_kernel()
linux/crash_dump.h defines is_kdump_kernel() to be used by code that
needs to know if the previous kernel crashed instead of a (clean) boot
or reboot.

This updates the just added powerpc code to use it.  This is needed
for the next commit, which will remove __kdump_flag.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:11:47 +11:00
Milton Miller
1767c8f392 powerpc: Kexec exit should not use magic numbers
Commit 54622f10a6 ("powerpc: Support for
relocatable kdump kernel") added a magic flag value in a register to
tell purgatory that it should be a panic kernel.  This part is wrong
and is reverted by this commit.

The kernel gets a list of memory blocks and a entry point from user space.
Its job is to copy the blocks into place and then branch to the designated
entry point (after turning "off" the mmu).

The user space tool inserts a trampoline, called purgatory, that runs
before the user supplied code.   Its job is to establish the entry
environment for the new kernel or other application based on the contents
of memory.  The purgatory code is compiled and embedded in the tool,
where it is later patched using the elf symbol table using elf symbols.

Since the tool knows it is creating a purgatory that will run after a
kernel crash, it should just patch purgatory (or the kernel directly)
if something needs to happen.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 16:11:44 +11:00
Ingo Molnar
4944dd62de Merge commit 'v2.6.28-rc2' into tracing/urgent 2008-10-27 10:50:54 +01:00
Linus Torvalds
5b34653963 Merge branch 'x86/um-header' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86/um-header' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (26 commits)
  x86: canonicalize remaining header guards
  x86: drop double underscores from header guards
  x86: Fix ASM_X86__ header guards
  x86, um: get rid of uml-config.h
  x86, um: get rid of arch/um/Kconfig.arch
  x86, um: get rid of arch/um/os symlink
  x86, um: get rid of excessive includes of uml-config.h
  x86, um: get rid of header symlinks
  x86, um: merge Kconfig.i386 and Kconfig.x86_64
  x86, um: get rid of sysdep symlink
  x86, um: trim the junk from uml ptrace-*.h
  x86, um: take vm-flags.h to sysdep
  x86, um: get rid of uml asm/arch
  x86, um: get rid of uml highmem.h
  x86, um: get rid of uml unistd.h
  x86, um: get rid of system.h -> system.h include
  x86, um: uml atomic.h is not needed anymore
  x86, um: untangle uml ldt.h
  x86, um: get rid of more uml asm/arch uses
  x86, um: remove dead header (uml module-generic.h; never used these days)
  ...
2008-10-23 10:22:01 -07:00
Steven Rostedt
15adc04898 ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file
The entire file of ftrace.c in the arch code needs to be marked
as notrace. It is much cleaner to do this from the Makefile with
CFLAGS_REMOVE_ftrace.o.

[ powerpc already had this in its Makefile. ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:00:25 +02:00
Steven Rostedt
4d296c2432 ftrace: remove mcount set
The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:00:23 +02:00
Al Viro
2e074004c6 x86, um: get rid of uml signal.h
the only theoretical reason for it these days is ppc; aside of uml/ppc
being dead, do_signal() would be happier in arch/powerpc/kernel/signal.h
anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22 22:55:20 -07:00
Ingo Molnar
debfcaf93e Merge branch 'tracing/ftrace' into tracing/urgent 2008-10-22 09:08:14 +02:00
Mohan Kumar M
54622f10a6 powerpc: Support for relocatable kdump kernel
This adds relocatable kernel support for kdump. With this one can
use the same regular kernel to capture the kdump. A signature (0xfeed1234)
is passed in r6 from panic code to the next kernel through kexec_sequence
and purgatory code. The signature is used to differentiate between
kdump kernel and non-kdump kernels.

The purgatory code compares the signature and sets the __kdump_flag in
head_64.S.  During the boot up, kernel code checks __kdump_flag and if it
is set, the kernel will behave as relocatable kdump kernel. This kernel
will boot at the address where it was loaded by kexec-tools ie. at the
address reserved through crashkernel boot parameter.

CONFIG_CRASH_DUMP depends on CONFIG_RELOCATABLE option to build kdump
kernel as relocatable. So the same kernel can be used as production and
kdump kernel.

This patch incorporates the changes suggested by Paul Mackerras to avoid
GOT use and to avoid two copies of the code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Mohan Kumar M <mohan@in.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-22 15:01:22 +11:00
David Gibson
201bdc868d powerpc: Further compile fixup for STRICT_MM_TYPECHECKS
A patch of mine was recently committed to fix up STRICT_MM_TYPECHECKS
behaviour on powerpc (f5ea64dcba).
However, something which breaks it again seems to have slipped in
afterwards.  So, here's another small fix.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-22 11:00:26 +11:00
Michael Neuling
8873d93b4b powerpc: Remove empty #else from signal_64.c
Remove empty/bogus #else from signal_64.c

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-22 11:00:26 +11:00
Becky Bruce
f465df81a8 powerpc: Move memory size print into common show_cpuinfo for 32-bit
Most of the platforms were printing the size of the memory
in their show_cpuinfo implementations. This moves that to
the common show_cpuinfo, so that all 32-bit platforms will
now print the size of memory.  I also update the code
to deal with the fact that total_memory is now a phys_addr_t.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-22 11:00:25 +11:00
Benjamin Herrenschmidt
a02efb906d Merge commit 'origin' into master
Manual merge of:

	arch/powerpc/Kconfig
	arch/powerpc/include/asm/page.h
2008-10-21 15:52:04 +11:00
Milton Miller
34d81f858a powerpc: Delete unused prom_strtoul and prom_memparse
These functions should have been static, and inspection shows they
are no longer used.   (We used to parse mem= but we now defer that
to early_param).

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21 15:20:08 +11:00
Milton Miller
ed7b2144bc powerpc: Find and destroy possible stale kernel added properties
64 bit powerpc requires the kexec user space tools avoid overwriting
the static kernel image and translation hash table when choosing
where to put memory image data because it copies the data into place
using the kernels virtual memory system.  Kexec userspace determines
these and other areas blocked by reading properties the kernel adds,
but does not filter these properties when creating the device tree
for the next kernel.

When the second kernel tries to add its values for these properties,
the export via /proc/device-tree is hidden by the pre-existing but
stale values from the flat tree.  Kexec userspace reads the old
property, allocates the new kernel at the old kernel's end, and
gets rejected by the overlap check.

Search and remove these stale properties before adding the new values.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21 15:19:12 +11:00
Kumar Gala
a3ba68f969 powerpc: Fix build issue with CONFIG_RELOCATABLE=y
There are two issues when we enable CONFIG_RELOCATABLE.  The first is due
to the fact that phys_addr_t is now defined in linux/types.h.  The second
is due to the fact that the DMA code changes expose memstart_addr to
prom_init.c

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21 15:17:49 +11:00
roel kluin
bb5e6491ca powerpc: Unsigned speed cannot be negative in udbg_16559.c
"unsigned int" speed cannot be negative, it's thus pointless
to test if it is.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21 15:17:47 +11:00
Benjamin Herrenschmidt
e9f82cb750 powerpc/PCI: Add legacy PCI access via sysfs
This patch adds support for legacy_io and legacy_mem files in
bus class directories in sysfs for powerpc

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 11:01:47 -07:00
Steven Rostedt
606576ce81 ftrace: rename FTRACE to FUNCTION_TRACER
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER.  The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.

This patch was generated mostly by script, and partially by hand.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 18:27:03 +02:00
Vivek Goyal
57cac4d188 kdump: make elfcorehdr_addr independent of CONFIG_PROC_VMCORE
o elfcorehdr_addr is used by not only the code under CONFIG_PROC_VMCORE
  but also by the code which is not inside CONFIG_PROC_VMCORE.  For
  example, is_kdump_kernel() is used by powerpc code to determine if
  kernel is booting after a panic then use previous kernel's TCE table.
  So even if CONFIG_PROC_VMCORE is not set in second kernel, one should be
  able to correctly determine that we are booting after a panic and setup
  calgary iommu accordingly.

o So remove the assumption that elfcorehdr_addr is under
  CONFIG_PROC_VMCORE.

o Move definition of elfcorehdr_addr to arch dependent crash files.
  (Unfortunately crash dump does not have an arch independent file
  otherwise that would have been the best place).

o kexec.c is not the right place as one can Have CRASH_DUMP enabled in
  second kernel without KEXEC being enabled.

o I don't see sh setup code parsing the command line for
  elfcorehdr_addr.  I am wondering how does vmcore interface work on sh.
  Anyway, I am atleast defining elfcoredhr_addr so that compilation is not
  broken on sh.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00
Josh Boyer
df8f71faa8 powerpc/40x: Add AMCC PowerPC 405EZ to cputable
This adds the AMCC PowerPC 405EZ chip to the cputable

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17 10:31:18 -04:00
Linus Torvalds
08d19f51f0 Merge branch 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (134 commits)
  KVM: ia64: Add intel iommu support for guests.
  KVM: ia64: add directed mmio range support for kvm guests
  KVM: ia64: Make pmt table be able to hold physical mmio entries.
  KVM: Move irqchip_in_kernel() from ioapic.h to irq.h
  KVM: Separate irq ack notification out of arch/x86/kvm/irq.c
  KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs
  KVM: Move device assignment logic to common code
  KVM: Device Assignment: Move vtd.c from arch/x86/kvm/ to virt/kvm/
  KVM: VMX: enable invlpg exiting if EPT is disabled
  KVM: x86: Silence various LAPIC-related host kernel messages
  KVM: Device Assignment: Map mmio pages into VT-d page table
  KVM: PIC: enhance IPI avoidance
  KVM: MMU: add "oos_shadow" parameter to disable oos
  KVM: MMU: speed up mmu_unsync_walk
  KVM: MMU: out of sync shadow core
  KVM: MMU: mmu_convert_notrap helper
  KVM: MMU: awareness of new kvm_mmu_zap_page behaviour
  KVM: MMU: mmu_parent_walk
  KVM: x86: trap invlpg
  KVM: MMU: sync roots on mmu reload
  ...
2008-10-16 15:36:00 -07:00
Joerg Roedel
2994a3b265 powerpc: use iommu_num_pages function in IOMMU code
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:33 -07:00
Joerg Roedel
3400001c53 powerpc: rename iommu_num_pages function to iommu_nr_pages
This is a preparation patch for introducing a generic iommu_num_pages function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:33 -07:00
Christoph Hellwig
b418da16dd compat: generic compat get/settimeofday
Nothing arch specific in get/settimeofday.  The details of the timeval
conversion varied a little from arch to arch, but all with the same
results.

Also add an extern declaration for sys_tz to linux/time.h because externs
in .c files are fowned upon.  I'll kill the externs in various other files
in a sparate patch.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:33 -07:00
Christoph Hellwig
f7a5000f7a compat: move cp_compat_stat to common code
struct stat / compat_stat is the same on all architectures, so
cp_compat_stat should be, too.

Turns out it is, except that various architectures have slightly and some
high2lowuid/high2lowgid or the direct assignment instead of the
SET_UID/SET_GID that expands to the correct one anyway.

This patch replaces the arch-specific cp_compat_stat implementations with
a common one based on the x86-64 one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [ parisc bits ]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:33 -07:00
Hollis Blanchard
49dd2c4928 KVM: powerpc: Map guest userspace with TID=0 mappings
When we use TID=N userspace mappings, we must ensure that kernel mappings have
been destroyed when entering userspace. Using TID=1/TID=0 for kernel/user
mappings and running userspace with PID=0 means that userspace can't access the
kernel mappings, but the kernel can directly access userspace.

The net is that we don't need to flush the TLB on privilege switches, but we do
on guest context switches (which are far more infrequent). Guest boot time
performance improvement: about 30%.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:16 +02:00
Hollis Blanchard
83aae4a809 KVM: ppc: Write only modified shadow entries into the TLB on exit
Track which TLB entries need to be written, instead of overwriting everything
below the high water mark. Typically only a single guest TLB entry will be
modified in a single exit.

Guest boot time performance improvement: about 15%.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:16 +02:00
Hollis Blanchard
20754c2495 KVM: ppc: Stop saving host TLB state
We're saving the host TLB state to memory on every exit, but never using it.
Originally I had thought that we'd want to restore host TLB for heavyweight
exits, but that could actually hurt when context switching to an unrelated host
process (i.e. not qemu).

Since this decreases the performance penalty of all exits, this patch improves
guest boot time by about 15%.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:16 +02:00
Benjamin Herrenschmidt
6dc6472581 Merge commit 'origin'
Manual fixup of conflicts on:

	arch/powerpc/include/asm/dcr-regs.h
	drivers/net/ibm_newemac/core.h
2008-10-15 11:31:54 +11:00
Benjamin Herrenschmidt
2bda347bc5 powerpc: Fix 32-bit SMP boot on CHRP
prom_init was changed to take a new argument, the address
where the kernel is loaded, which is now used to copy the
SMP spin loop down before use.

However, only head_64.S was adapted to pass this new value,
not head_32.S, thus breaking SMP boot on 32-bit SMP CHRP
machines.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-15 10:13:29 +11:00
Benjamin Herrenschmidt
7b6b574ca7 powerpc: Fix link errors on 32-bit machines using legacy DMA
The new merged DMA code will try to access isa_bridge_pcidev when
trying to DMA to/from legacy devices. This is however only defined
on 64-bit. Fixes this for now by adding the variable, even if it
stays NULL. In the long run, we'll make isa-bridge.c common to
32 and 64-bit.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-15 10:13:29 +11:00
Benjamin Herrenschmidt
b556151110 powerpc/pci: Improve detection of unassigned bridge resources
When the powerpc PCI layer is not configured to re-assign everything,
it currently fails to detect that a PCI to PCI bridge has been left
unassigned by the firmware and tries to allocate resource for the
default window values in the bridge (0...X) (with the notable exception
of a hack we have in there that detects some Apple firmware unassigned
bridge resources).

This results in resource allocation failures, which are generally
fixed up later on but it causes scary warnings in the logs and we
have seen the fixup code fall over in some circumstances (a different
issue to fix as well).

This code improves that by providing a more complete & useful function
to intuit that a bridge was left unassigned by the firmware, and thus
force a full re-allocation by the PCI code without trying to allocate
the existing useless resources first.

The algorithm we use basically considers unassigned a window that
starts at 0 (PCI address) if the corresponding address space enable
bit is not set. In addition, for memory space, it considers such a
resource unassigned also if the host bridge isn't configured to
forward cycles to address 0 (ie, the resource basically overlaps
main memory).

This fixes a range of problems with things like Bare-Metal support
on pSeries machines, or attempt to use partial firmware PCI setup.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-15 10:13:29 +11:00
Sebastian Andrzej Siewior
cd301c7ba4 powerpc: Reflect the used arguments in machine_init() prototype
The "phys" argument to machine_init() isn't used and isn't likely to
ever be so let's remove it.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-14 10:35:26 +11:00
Benjamin Herrenschmidt
8aa2659009 powerpc: Fix DMA offset for non-coherent DMA
After Becky's work we can almost have different DMA offsets
between on-chip devices and PCI. Almost because there's a
problem with the non-coherent DMA code that basically ignores
the programmed offset to use the global one for everything.
This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-14 10:35:26 +11:00
David Woodhouse
e758936e02 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	include/asm-x86/statfs.h
2008-10-13 17:13:56 +01:00
Milton Miller
9bd54d185a powerpc: remove non-dependent load fsl_booke PTE_64BIT
b38fd42ff4 added false dependencys
to order the load of upper and lower halfs of the pte, but only
adjusted whitespace instead of deleting the old load in the iside
handler, letting the hardware see the non-dependent load.

This patch removes the extra load.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:59 -05:00
John Rigby
4a015c3740 powerpc/fsl: Hide MPC5121 pci bridge.
The class of the MPC5121 pci host bridge is PCI_CLASS_BRIDGE_OTHER
while other freescale host bridges have class set to
PCI_CLASS_PROCESSOR_POWERPC.

This patch makes fixup_hide_host_resource_fsl match
PCI_CLASS_BRIDGE_OTHER in addition to PCI_CLASS_PROCESSOR_POWERPC.

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
Milton Miller
22d660ffd0 powerpc/smp: No need to set_need_resched when getting a resched IPI
The comment in the code was asking "Do we have to do this?", and according
to x86 and s390 the answer is no, the scheduler will do it before calling
the arch hook.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-13 16:24:20 +11:00
Paul Mackerras
91a0030295 powerpc: Sync RPA note in zImage with kernel's RPA note
Commit 9b09c6d909 ("powerpc: Change the
default link address for pSeries zImage kernels") changed the
real-base value in the CHRP note added by the addnote program from
12MB to 32MB to give more space for Open Firmware to load the zImage.
(The real-base value says where we want OF to position itself in
memory.)  However, this change was ineffective on most pSeries
machines, because the RPA note added by addnote has the "ignore me"
flag set to 1.  This was intended to tell OF to ignore just the RPA
note, but has the side effect of also making OF ignore the CHRP note
(at least on most pSeries machines).

To solve this we have to set the "ignore me" flag to 0 in the RPA
note.  (We can't just omit the RPA note because that is equivalent to
having an RPA note with default values, and the default values are not
what we want.)  However, then we have to make sure the values in the
zImage's RPA note match up with the values that the kernel supplies
later in prom_init.c with either the ibm,client-architecture-support
call or the process-elf-header call in prom_send_capabilities().

So this sets the "ignore me" flag in the RPA note in addnote to 0, and
adjusts the RPA note values in addnote.c and in prom_init.c to be
consistent with each other and with the values in ibm_architecture_vec.

However, since the wrapper is independent of the kernel, this doesn't
ensure that the notes will stay consistent.  To ensure that, this adds
code to addnote.c so that it can extract the kernel's RPA note from
the kernel binary and put that in the zImage.  To that end, we put the
kernel's fake ELF header (which contains the kernel's RPA note) into
its own section, and arrange for wrapper to pull out that section with
objcopy and pass it to addnote, which then extracts the RPA note from
it and transfers it to the zImage.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-10 15:55:19 +11:00