Commit Graph

5307 Commits

Author SHA1 Message Date
Linus Torvalds
ae83060026 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  ehea: Fix napi list corruption on ifconfig down
  igbvf: Allow VF driver to correctly recognize failure to set mac
  3c59x: Fix build failure with gcc 3.2
  sky2: Avoid transmits during sky2_down()
  iwlagn: do not send key clear commands when rfkill enabled
  libertas: Read buffer overflow
  drivers/net/wireless: introduce missing kfree
  drivers/net/wireless/iwlwifi: introduce missing kfree
  zd1211rw: fix unaligned access in zd_mac_rx
  cfg80211: fix regression on beacon world roaming feature
  cfg80211: add two missing NULL pointer checks
  ixgbe: Patch to modify 82598 PCIe completion timeout values
  bluetooth: rfcomm_init bug fix
  mlx4_en: Fix double pci unmapping.
  mISDN: Fix handling of receive buffer size in L1oIP
  pcnet32: VLB support fixes
  pcnet32: remove superfluous NULL pointer check in pcnet32_probe1()
  net: restore the original spinlock to protect unicast list
  netxen: fix coherent dma mask setting
  mISDN: Read buffer overflow
  ...
2009-08-04 15:38:34 -07:00
Michael Chan
a541f8401d iscsi: Use GFP_ATOMIC in iscsi_offload_mesg().
Changing to GFP_ATOMIC because the only caller in cnic/bnx2i may
be calling this function while holding spin_lock.

This problem was discovered by Mike Christie.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30 11:05:03 -07:00
Martin K. Petersen
ffd4bc2a98 [SCSI] sd: Avoid sending extended inquiry to legacy devices
Some USB devices crash when we send them an inquiry with the EVPD bit
set, regardless of page requested (i.e. including page 0).

We only need the extended inquiry to gain access to VPD pages 0xB0 and
0xB1.  These appeared in SBC2 and SBC3 respectively, so we can restrict
sending the extended inquiry to devices reporting SPC3 or higher.

This fixes bugzilla.kernel.org #13657.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[jejb: added comment]
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 11:37:50 -05:00
Tom Peng
19252de681 [SCSI] libsas: fix wide port hotplug issues
Hotplug of phys which form wide ports simply does not work at the moment.  Fix
this by adding checks at the hotplug points to see if the attached sas address
of the phy already exists (in which case it's part of a wide port) and act
accordingly.

Signed-off-by: Tom Peng <tom_peng@usish.com>
Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: Kevin Ao <aoqingyun@usish.com>
[jejb: tidied up coding, fixed an error case and made TRUE/FALSE lower
 case to fix a ppc64 compile error in linux-next]
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 09:54:39 -05:00
Vasu Dev
a0cc1ecc09 [SCSI] libfc: fix a circular locking warning during sending RRQ
Currently the fc_exch_rrq is called with fc_exch's ex_lock held.
The fc_exch_rrq allocates new exch and that requires taking
ex_lock again after EM lock. This locking order causes warning,
see more details on this warning at :-

 http://www.open-fcoe.org/pipermail/devel/2009-July/003251.html

This patch fixes this by dropping the ex_lock before calling
fc_exch_rrq().

The fc_exch_rrq needs to grab ex_lock lock again to schedule
RRQ retry and in the meanwhile fc_exch_reset could occur before
ex_lock is grabbed inside fc_exch_rrq. So to handle this case,
this patch adds additional check to detect fc_exch_reset after
ex_lock acquired and in case the fc_exch_reset occurred then
abandons the RRQ retry and releases the exch.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 08:50:02 -05:00
Karen Higgins
16ed55f9de [SCSI] qla4xxx: Remove hiwat code so scsi eh does not get escalated when we can make progress
Removed unnecessary hiwat code to free up the number available IOCBs.
Eliminates unnecessary eh_ escalations due to inability to obtain IOCB
pkt for marker.

v2.
- Remove define not used anymore and fix req_q_coun accounting.

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
[michaelc: ported patch from qlogic.com driver to upstream]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 08:50:01 -05:00
Karen Higgins
612f734887 [SCSI] qla4xxx: Fix srb lookup in qla4xxx_eh_device_reset
eh_device_reset may be called from scsi error handler or sg_reset, etc.
When called from sg_reset, there will not be an associated srb.  The
driver should lookup the corresponding device handle given information
from the supplied cmd structure and should not assume that there exists
an srb.

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 08:50:01 -05:00
Karen Higgins
dca05c4c07 [SCSI] qla4xxx: Fix Driver Fault Recovery Completion
Fixed driver bug where adapter recovery did not complete if there were
outstanding commands detected on that host adapter.

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 08:50:00 -05:00
Mike Christie
5c656af7e4 [SCSI] qla4xxx: add timeout handler
Recently dm-multipath began calling blk_abort_queue. This causes all the
commands/request running on the path to have the timeout function called.
If a path does go down, and the LLD returns DID_*, dm-multpiath will eventually
get this error and begin to call the cmd timeout handler. qla4xxx currently
does not set a timed out handler and so the default one could return
BLK_EH_NOT_HANDLED and end up firing the scsi eh and stopping IO to all
paths on the host when only one path is affected.

For software and offload iscsi we have a timed out handler already.
This patch adds a driver specific one to qla4xxx because there
are some ddb->state and session->state and command completion races
that are better handled in the LLD.

This also handles the problem where if the session is down,
we do not need the scsi eh to run until the transport code
has tried to reconnect us.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 08:50:00 -05:00
Karen Higgins
94bced3c1b [SCSI] qla4xxx: Correct Extended Sense Data Errors
Fixed sense data errors occurring above the first 32 bytes,
as required by some third party applications.  Sense data
in the first 32 bytes has always been correct.

Patch updated to use srb data variables instead of scsi command
scratchpad data area, as scratchpad area is already used.

Also, corrected debug print alignment bug in dump_buffer routine.
Changed KERN_DEBUG to KERN_INFO in printk statements in this routine.

Changed version number to 5.01.00-k9

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
[michaelc: fixed checkpath.pl errors]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 08:50:00 -05:00
Mike Christie
6187c24208 [SCSI] libiscsi: disable bh in and abort handler.
The session lock can be held in the scsi eh thread or the completion
paths run from the net softirq. This disables bhs in iscsi_eh_abort when
taking the session lock.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30 08:49:59 -05:00
Tom Peng
5381837f12 [SCSI] libsas: reuse the original port when hotplugging phys in wide ports
There's a hotplug problem in the way libsas allocates ports: it loops over the
available ports first trying to add to an existing for a wide port and
otherwise allocating the next free port.  This scheme only works if the port
array is packed from zero, which fails if a port gets hot unplugged and the
array becomes sparse.  In that case, a new port is formed even if there's a
wide port it should be part of.  Fix this by creating two loops over all the
ports:  the first to see if the phy should be part of a wide port and the
second to form a new port in an empty port slot.

Signed-off-by: Tom Peng <tom_peng@usish.com>
Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-16 12:50:44 -05:00
Alexey Dobriyan
405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
FUJITA Tomonori
ecb554a846 block: fix sg SG_DXFER_TO_FROM_DEV regression
I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use
the block layer mapping API (2.6.28).

Douglas Gilbert explained SG_DXFER_TO_FROM_DEV:

http://www.spinics.net/lists/linux-scsi/msg37135.html

=
The semantics of SG_DXFER_TO_FROM_DEV were:
   - copy user space buffer to kernel (LLD) buffer
   - do SCSI command which is assumed to be of the DATA_IN
     (data from device) variety. This would overwrite
     some or all of the kernel buffer
   - copy kernel (LLD) buffer back to the user space.

The idea was to detect short reads by filling the original
user space buffer with some marker bytes ("0xec" it would
seem in this report). The "resid" value is a better way
of detecting short reads but that was only added this century
and requires co-operation from the LLD.
=

This patch changes the block layer mapping API to support this
semantics. This simply adds another field to struct rq_map_data and
enables __bio_copy_iov() to copy data from user space even with READ
requests.

It's better to add the flags field and kills null_mapped and the new
from_user fields in struct rq_map_data but that approach makes it
difficult to send this patch to stable trees because st and osst
drivers use struct rq_map_data (they were converted to use the block
layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer
mapping API.

zhou sf reported this regiression and tested this patch:

http://www.spinics.net/lists/linux-scsi/msg37128.html
http://www.spinics.net/lists/linux-scsi/msg37168.html

Reported-by: zhou sf <sxzzsf@gmail.com>
Tested-by: zhou sf <sxzzsf@gmail.com>
Cc: stable@kernel.org
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:53 +02:00
Joe Perches
ad361c9884 Remove multiple KERN_ prefixes from printk formats
Commit 5fd29d6ccb ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08 10:30:03 -07:00
Linus Torvalds
29f31773e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: finally remove the obsolete variable $TOPDIR
  gitignore: ignore scripts/ihex2fw
  Kbuild: Disable the -Wformat-security gcc flag
  gitignore: ignore gcov output files
  kbuild: deb-pkg ship changelog
  Add new __init_task_data macro to be used in arch init_task.c files.
  asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h
  Add new macros for page-aligned data and bss sections.
  asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
2009-07-04 09:46:01 -07:00
Linus Torvalds
c7cba0623f Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] cxgb3i: fix connection error when vlan is enabled
  [SCSI] FC transport: Locking fix for common-code FC pass-through patch
  [SCSI] zalon: fix oops on attach failure
  [SCSI] fnic: use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK
  [SCSI] fnic: remove redundant BUG_ONs and fix checks on unsigned
  [SCSI] ibmvscsi: Fix module load hang
2009-07-02 16:52:25 -07:00
Jens Axboe
018e044689 block: get rid of queue-private command filter
The initial patches to support this through sysfs export were broken
and have been if 0'ed out in any release. So lets just kill the code
and reclaim some space in struct request_queue, if anyone would later
like to fixup the sysfs bits, the git history can easily restore
the removed bits.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:26 +02:00
Karen Xie
a222ad1a4b [SCSI] cxgb3i: fix connection error when vlan is enabled
There is a bug when VLAN is configured on the cxgb3 interface, the iscsi
conn. would be denied with message "cxgb3i: NOT going through cxgbi device."

This patch adds code to get the real egress net_device when vlan is configured.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-27 12:56:00 -05:00
Amerigo Wang
1129423539 kbuild: finally remove the obsolete variable $TOPDIR
TOPDIR is obsolete, it can be finally removed now.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-27 00:27:17 +02:00
Christof Schmitt
39562e7839 [SCSI] FC transport: Locking fix for common-code FC pass-through patch
Fix this:
------------[ cut here ]------------
Badness at block/blk-core.c:244
CPU: 0 Tainted: G        W  2.6.31-rc1-00004-gd3a263a #3
Process zfcp_wq (pid: 901, task: 000000002fb7a038, ksp: 000000002f02bc78)
Krnl PSW : 0704300180000000 00000000002141ba (blk_remove_plug+0xb2/0xb8)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:3 PM:0 EA:3
Krnl GPRS: 0000000000000001 0000000000000001 0000000022811440 0000000022811798
           000000000027ff4e 0000000000000000 0000000000000000 000000002f00f000
           070000000006a0f4 000000002af70000 000000002af2a800 00000000228d1c00
           0000000022811440 000000000050c708 000000002f02bca8 000000002f02bc80
Krnl Code: 00000000002141b0: b9140022		lgfr	%r2,%r2
           00000000002141b4: 07fe		bcr	15,%r14
           00000000002141b6: a7f40001		brc	15,2141b8
          >00000000002141ba: a7f4ffbe		brc	15,214136
           00000000002141be: 0707		bcr	0,%r7
           00000000002141c0: ebaff0680024	stmg %r10,%r15,104(%r15)
           00000000002141c6: c0d00017c2a9	larl	%r13,50c718
           00000000002141cc: a7f13fc0		tmll	%r15,16320
Call Trace:
([<000000000050e7d8>] C.272.16122+0x88/0x110)
 [<00000000002141ec>] __blk_run_queue+0x2c/0x154
 [<000000000028013a>] fc_remote_port_add+0x85e/0x95c
 [<000000000037596e>] zfcp_scsi_rport_work+0xe6/0x148
 [<000000000006908c>] worker_thread+0x25c/0x318
 [<000000000006f10c>] kthread+0x94/0x9c
 [<000000000001c2b2>] kernel_thread_starter+0x6/0xc
 [<000000000001c2ac>] kernel_thread_starter+0x0/0xc
INFO: lockdep is turned off.
Last Breaking-Event-Address:
 [<00000000002141b6>] blk_remove_plug+0xae/0xb8

The FC pass-through support triggers the WARN_ON(!irqs_disabled()) in
blk_plug_device. Since blk_plug_device requires being called with
disabled interrupts, use spin_lock_irqsave in fc_bsg_goose_queue to
disable the interrupts before calling into the block layer.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-26 10:29:48 -05:00
James Bottomley
d3a263a816 [SCSI] zalon: fix oops on attach failure
I recently discovered on my zalon that if the attachment fails because
of a bus misconfiguration (I scrapped my HVD array, so the card is now
unterminated) then the system oopses.  The reason is that if
ncr_attach() returns NULL (signalling failure) that NULL is passed by
the goto failed straight into ncr_detach() which oopses.

The fix is just to return -ENODEV in this case.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-25 11:37:23 -05:00
Abhijeet Joglekar
e3f47cc74b [SCSI] fnic: use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK
Robert Love reported warning while building fnic_main.c:
drivers/scsi/fnic/fnic_main.c:478: warning: `DMA_nnBIT_MASK' is deprecated.

Replaced use of DMA_nnBIT_MASK by DMA_BIT_MASK(nn)

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-25 11:08:53 -05:00
Roel Kluin
87a2d34b03 [SCSI] fnic: remove redundant BUG_ONs and fix checks on unsigned
The shost sg tablesize is set to FNIC_MAX_SG_DESC_CNT and fnic uses
scsi_dma_map, so both BUG_ONs can be removed.

scsi_dma_map may return -ENOMEM, sg_count should be int to catch that.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-25 11:08:23 -05:00
Brian King
e08afeb7e6 [SCSI] ibmvscsi: Fix module load hang
Fixes a regression seen in the ibmvscsi driver when using the VSCSI
server in SLES 9 and SLES 10. The VSCSI server in these releases
has a bug in it in which it does not send responses to unknown MADs.
Check the OS Type field in the adapter info response and do not send
these unsupported commands when talking to an older server.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-25 11:06:41 -05:00
James Bottomley
3c559ea8fd [SCSI] scsi_transport_fc: replace BUS_ID_SIZE by fixed count
BUS_ID_SIZE is being removed from the kernel.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 12:11:43 -05:00
Hannes Reinecke
b391277a56 sd, sr: fix Driver 'sd' needs updating message
If a SCSI ULD driver sets blk_queue_prep_rq(), it should clean it
up itself on remove(), and not from the bus callbacks. This
removes the need to hook into bus->remove(), which should not
be used at the same time as driver->remove().

[jejb: fix sdkp initialisation problem due to mismerge]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 12:01:27 -05:00
Jaswinder Singh Rajput
24add1c432 scsi_transport_iscsi: return -EOVERFLOW for Too many iscsi targets
setting err as -EOVERFLOW for Too many iscsi targets.

Also fixes a spurious compiler warning for gcc 4.3.3 and gcc 4.4 :

  CC      drivers/scsi/scsi_transport_iscsi.o
drivers/scsi/scsi_transport_iscsi.c: In function ‘iscsi_add_session’:
drivers/scsi/scsi_transport_iscsi.c:678: warning: ‘err’ may be used uninitialized in this function

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:58:11 -05:00
Giridhar Malavali
47e7e89ed0 fc_transport: Selective return value from BSG timeout function
The return value from BSG timout function should be based on the state of the
BSG job. This helps block layer to take selective actions to clean up BSG job.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:13:41 -05:00
Giridhar Malavali
b5c6f77680 fc_transport: The softirq_done function registration for BSG request
Registered the softirq_done function, since this is requried iby an request
using block level request timeout functionality. This function will be called
by the block layer as part of time out clean process to release the BSG
request.

Moved some of the BSG request completion activities to softirq_done routine to
take care of both normal and timout completions.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:12:56 -05:00
John Stoffel
75be63bcf7 sym53c8xx: ratelimit parity errors
This makes a huge difference when you have a serial console on bootup to limit
these messages to a sane number.

Signed-off-by: John Stoffel <john@stoffel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:12:17 -05:00
Stefan Richter
5e2fb91792 explain the hidden scsi_wait_scan Kconfig variable
People keep sending patches to expose CONFIG_SCSI_WAIT_SCAN as a tunable
item.  These patches aren't accepted upstream, so let's stop the ongoing
irritation of people due to the unconditionally installed module and its
Kconfig symbol.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:10:41 -05:00
Brian King
017b2ae33c ibmvfc: Fix endless PRLI loop in discovery
Fixes a problem seen where sending a PRLI to a target
resulted in it sending a LOGO. This caused the ibmvfc
driver to go back through discovery again, which caused
another PRLI attempt, which caused another LOGO. Fix this
behavior by ignoring LOGO if we haven't even logged into
the target yet.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:09:57 -05:00
Brian King
f1d7fb7a8a ibmvfc: Process async events before command responses
Since async events could indicate changes to link status, or
events which could affect decisions made during discovery, we should
process async events prior to command completion responses.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:09:56 -05:00
Robert Love
7414705ea4 libfc: Add runtime debugging with debug_logging module parameter
This patch adds the /sys/module/libfc/parameters/debug_logging
file to sysfs as a module parameter. It accepts an integer
bitmask for logging. Currently it supports:

   bit
LSB 0 = general libfc debugging
    1 = lport debugging
    2 = disc debugging
    3 = rport debugging
    4 = fcp debugging
    5 = EM debugging
    6 = exch/seq debugging
    7 = scsi logging (mostly error handling)

the other bits are not used at this time.

The patch converts all of the libfc source files to use
these new macros and removes the old FC_DBG macro.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:07:08 -05:00
Robert Love
650bd12b9e libfcoe: Add runtime debugging with module param debug_logging
This patch adds a 'debug_logging' module parameter to
libfcoe.ko. It is an unsigned int that represents a bitmask of
available debug logging levels, each of which can be tuned at
runtime. Currently there are only two logging levels for this
module-

   bit
LSB 0 = libfcoe general logging
    1 = FIP logging

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:07:06 -05:00
Robert Love
d5488eb9cd fcoe: Add runtime debug logging with module parameter debug_logging
This patch converts all FC_DBG statements to use new runtime tunable
debug macros. The fcoe.ko module now has a debug_logging module
parameter.

fcoe_debug_logging is an unsigned integer representing a bitmask of all
available logging levels. Currently only two logging levels are
supported-

   bit
LSB 0 = general fcoe logging
    1 = netdevice related logging

This patch also attempts to clean up some debug statement formatting
so it's more readable.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:07:02 -05:00
Martin K. Petersen
ea61fca58c scsi_debug: Add support for physical block exponent and alignment
This patch adds support for setting the physical block exponent and
lowest aligned LBA in the READ CAPACITY(16) response.

The B0 VPD page is adjusted accordingly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:03:54 -05:00
Randy Dunlap
895553824e cnic: add NETDEV_1000 and NETDEVICES to Kconfig select
NETDEVICES + NETDEV_1000 need to be enabled so that kconfig will check
those branches for selects and enforce "select UIO" under CNIC.
Otherwise the build fails with:

ERROR: "uio_unregister_device" [drivers/net/cnic.ko] undefined!
ERROR: "uio_event_notify" [drivers/net/cnic.ko] undefined!
ERROR: "__uio_register_device" [drivers/net/cnic.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:02:59 -05:00
Wayne Boyer
1be7bd82bf ipr: differentiate pci-x and pci-e based adapters
MSI has only been tested on and known to work with PCI-E based adapters.  This
patch adds a field to struct ipr_chip_t to indicate which type of interrupt to
use based on what is known about the chip.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:47 -05:00
Wayne Boyer
95fecd9039 ipr: add test for MSI interrupt support
The return value from pci_enable_msi() can not always be trusted.  This patch
adds code to generate an interrupt after MSI has been enabled and tests
whether or not we can receive and process it.  If the tests fails, then fall
back to LSI.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:46 -05:00
James Bottomley
a9e0edb687 scsi_transport_spi: Blacklist Ultrium-3 tape for IU transfers
There have been several bug reports which identified the Ultrium-3
tape as just hanging up on the bus during certain types of IU
transfer.  The identified culpret is type 0x02 (MULTIPLE COMMAND)
transfers.  The only way to prevent this tape wedging is to prevent it
from using IU transfers at all.  So this patch uses the exported
blacklist matching technology to recognise the drive and force it not
to use IU transfers.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:46 -05:00
James Bottomley
9872b81cf9 scsi_transport_spi: use spi target settings instead of inquiry data for DV
Right at the moment, we carefully set up the spi_support_xx in the
device configuration routines, but then we never actually use the
results: we rely on the inquiry strings.  If we're going to allow
overrides to the inquiry data, we have to rely on our own internal
settings.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:45 -05:00
James Bottomley
598fa4b775 enhance device info matching for multiple tables
The current scsi_devinfo.c matching routines use a single table for
the global blacklist.  However, we're developing a need to blacklist
from specific transports too (notably some tape drives using SPI which
don't respond well to high speed protocols).  Instead of developing
separate blacklist matching for each transport class needing it,
enhance the current list matching to permit multiple lists.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:45 -05:00
Andrew Vasquez
e0420029de qla2xxx: Update version number to 8.03.01-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:44 -05:00
Andrew Vasquez
e18e963b7e qla2xxx: Correct (again) overflow during dump-processing on large-memory ISP23xx parts.
Commit 7b867cf76f ([SCSI] qla2xxx:
Refactor qla data structures) inadvertently reverted
e792121ec8 ([SCSI] qla2xxx: Correct
overflow during dump-processing on large-memory ISP23xx parts.).

Cc: stable@kernel.org
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:44 -05:00
Andrew Vasquez
9d2683c05c qla2xxx: Limit querying to supported mailbox-registers while reading FW state.
Pre-ISP24xx chips have dedicated uses for mailbox 4 and 5 which
software should typically not query nor update.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:44 -05:00
Harish Zunjarrao
1bb3954851 qla2xxx: Correct iiDMA-update calling conventions.
* To set iiDMA speeds for ISP81XX, bits 5-0 are used whereas for
  other older ISPs bits 2-0 are used.
* Pass proper VP index

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:43 -05:00
Anirban Chakraborty
27dc9c5a3d qla2xxx: Fixed a bug in number of response queue creation logic.
Cc: stable@kernel.org
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:43 -05:00
Joe Eykholt
30c9afa6cc fix race that can give duplicate host number
Just once, two fcoe instances got the same host number
from scsi_add_host().

Use atomic_t and atomic_inc_return() to get next host number.
Subtract 1, so that scsi_host still starts with 0.

[jejb: added comment about unusual subtraction]
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:42 -05:00