Commit Graph

26 Commits

Author SHA1 Message Date
Christoph Hellwig
dfd287f6ee [SCSI] aic7xxx: sane pci probing
always probe in bus order, avoid any reordering

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11 12:43:09 -05:00
James Bottomley
ace4e7185d [SCSI] aic7xxx: fix boot hang with Fujitsu drives
Apparently these are the only drives that try to negotiate IU and QAS
at u160 speeds.  The aic7xxx driver can't cope with this.  The fix is
to eliminate the IU and QAS setting routines.  I've #if 0'd them out,
just in case we ever get the sequencer documentation out of Adaptec,
since we'd then be able to fix the driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-03 10:44:21 -05:00
Jeff Garzik
68b3aa7c98 [SCSI] allow sleeping in ->eh_bus_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:10 -05:00
Jeff Garzik
8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
James Bottomley
12021fff2b [SCSI] aic7xxx: fix the BIOS limits setting routines
Following the go around over the SONY DVD that needs artificial limits,
this should be the correct code for all cases (minus the debugging
prints).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-13 21:37:27 -05:00
Christoph Hellwig
d6cbbad729 [SCSI] aic7xxx: clean up eisa support
- the eisa layer only probes when it's actually safe, no need for
   a driver option
 - store the id table directly in linux format instead of convering
   at runtime

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:45:06 -05:00
Christoph Hellwig
8eb3794257 [SCSI] aic7xxx: remove some dead wood
especially the now dead scsi_cmnd overlay

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:44:12 -05:00
James Bottomley
597487b9ba [SCSI] fix aic7xxx coupled parameter problem
For setting coupled parameters, we need to be comparing against the goal
settings, not the current ones.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03 12:38:39 -05:00
James Bottomley
b1abb4d67f [SCSI] aic7xxx: remove separate target and device allocations
Since the aic driver is now taught to speak in terms of the generic
linux devices, we can now also dispense with the transport class get
routines (since we update the parameters when the driver sees they
change) and also plumb it into the spi transport transfer agreement
reporting infrastructure.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26 14:28:31 -04:00
Andrew Morton
d981289627 [PATCH] aic7xxx_osm build fix
Fix a c99ism.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-24 20:08:14 -07:00
James Bottomley
2bf2c568c8 [SCSI] aic7xxx: fix U160 mode
The new period/dt setting routines don't get the coupling of these
parameters correct.  This means that Domain Validation never gets DT
set, and thus the drive gets restricted to U80.

Fix this by restoring the couplings in the set routines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 16:43:51 -05:00
James Bottomley
fb3089dfb5 [SCSI] aic7xxx: add back locking
Tampering with the settings has to be done under the host lock ...
slave_alloc isn't called under any lock, so this has to be done
explicitly.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:43 -05:00
James Bottomley
c7525233d2 [SCSI] aic7xxx: make correct use of slave_alloc/destroy and remove the per device timer
The allocation of all of our components should be done in slave alloc.
Currently it's rather fancifully refcounted in the queuecommand
callback.  This patch moves allocation and destroy to their correct
places in slave_alloc/slave_destory.  Now we can guarantee that
everywhere a device is requested, it's actually been allocated, so don't
check for this anymore.

Additionally, the per device busy timer was the only source of potential
use after free.  It's been deleted because Linux does the correct thing
with busy returns, so there's no need to implement a separate timer in
the driver.

Finally, implement code that forces all the device parameters to zero
(i.e. async and narrow) in the slave alloc, inform the spi class of the
bios recorded maximums and wait until slave configure before trying
anything more adventurous.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:42 -05:00
James Bottomley
8e45ebcc66 [SCSI] aic7xxx: remove the completeq
This should finish the spurious queue removal from aic7xxx (there are
other queues that are probably unnecessary, but at least the major and
obviously unnecessary ones are done with).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:40 -05:00
James Bottomley
38c29ce06d [SCSI] aic7xxx: remove the last vestiges of the runq
This was rendered obsolete by the busyq removal; remove some of the last
remnants of its presence.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:39 -05:00
Christoph Hellwig
013791ee01 [SCSI] aic7xxx: remove usage of obsolete typedefs
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:38 -05:00
Christoph Hellwig
7dfa0f2673 [SCSI] remove dma_mask hacks
pci_alloc_consistent is under 4G by default.  Also simplify the
definition of bus_dmamap_t.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:37 -05:00
Christoph Hellwig
dedd831081 [SCSI] aic7xxx: remove Linux 2.4 ifdefs
There's not much sense in sharing code anymore now that aic7xxx uses
various transport class facilities.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:36 -05:00
James Bottomley
e4e360c325 [SCSI] remove aic7xxx busyq
The aic7xxx driver has two spurious queues in it's linux glue code: the
busyq which queues incoming commands to the driver and the completeq
which queues finished commands before sending them back to the mid-layer

This patch just removes the busyq and makes the aic finally return the
correct status to get the mid-layer to manage its queueing, so a command
is either committed to the sequencer or returned to the midlayer for
requeue.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:34 -05:00
James Bottomley
fad01ef88d [SCSI] correct aic7xxx period setting routines
This is similar to the previous sym2 problem.  For Domain Validation to
work we can't allow any period setting to turn wide on if it was
previously off.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:33 -05:00
Christoph Hellwig
0bdcd78ea2 [SCSI] aic7xxx: remove inquiry sniffing leftovers
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-21 16:13:39 -04:00
James Bottomley
858eaca169 [PATCH] Fix aic7xxx_osm.c compile with older gcc's
My version of gcc doesn't warn about this error (declaration in the
middle of a set of statements).

The fix is simple (this also corrects return code; for init functions it
should be zero or error).
2005-04-21 07:35:45 -07:00
cb624029ca aic7xxx: convert to SPI transport class Domain Validation
Now that we export all the parameters, this is easy to do.
It also means that we can dump about 2000 lines of code that
were dedicated to doing this internally.

Additionally, this removes all the aic7xxx driver abuse
of SCSI timers which were embedded in the DV routines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:52:27 -05:00
92d161c373 aic7xxx: add support for the SPI transport class
This is just a simplistic patch to export all of the
aic7xxx internal transport parameters via the SPI
transport class.  It doesn't actually alter the way the
driver works at all.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:52:02 -05:00
be7db055dd [PATCH] remove old scsi data direction macros
these have been wrappers for the generic dma direction bits since 2.5.x.
This patch converts the few remaining drivers and removes the macros.

Arjan noticed there's some hunk in here that shouldn't.  Updated patch
below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:49:58 -05:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00