Commit Graph

65 Commits

Author SHA1 Message Date
Marcelo Tosatti
84261923d3 KVM: protect concurrent make_all_cpus_request
make_all_cpus_request contains a race condition which can
trigger false request completed status, as follows:

CPU0                                              CPU1

if (test_and_set_bit(req,&vcpu->requests))
   ....                                        	   if (test_and_set_bit(req,&vcpu->requests))
   ..                                                  return
proceed to smp_call_function_many(wait=1)

Use a spinlock to serialize concurrent CPUs.

Cc: stable@kernel.org
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-28 14:10:29 +03:00
Marcelo Tosatti
547de29e5b KVM: protect assigned dev workqueue, int handler and irq acker
kvm_assigned_dev_ack_irq is vulnerable to a race condition with the
interrupt handler function. It does:

        if (dev->host_irq_disabled) {
                enable_irq(dev->host_irq);
                dev->host_irq_disabled = false;
        }

If an interrupt triggers before the host->dev_irq_disabled assignment,
it will disable the interrupt and set dev->host_irq_disabled to true.

On return to kvm_assigned_dev_ack_irq, dev->host_irq_disabled is set to
false, and the next kvm_assigned_dev_ack_irq call will fail to reenable
it.

Other than that, having the interrupt handler and work handlers run in
parallel sounds like asking for trouble (could not spot any obvious
problem, but better not have to, its fragile).

CC: sheng.yang@intel.com
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:53 +03:00
Marcelo Tosatti
32f8840064 KVM: use smp_send_reschedule in kvm_vcpu_kick
KVM uses a function call IPI to cause the exit of a guest running on a
physical cpu. For virtual interrupt notification there is no need to
wait on IPI receival, or to execute any function.

This is exactly what the reschedule IPI does, without the overhead
of function IPI. So use it instead of smp_call_function_single in
kvm_vcpu_kick.

Also change the "guest_mode" variable to a bit in vcpu->requests, and
use that to collapse multiple IPI's that would be issued between the
first one and zeroing of guest mode.

This allows kvm_vcpu_kick to called with interrupts disabled.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:53 +03:00
Sheng Yang
522c68c441 KVM: Enable snooping control for supported hardware
Memory aliases with different memory type is a problem for guest. For the guest
without assigned device, the memory type of guest memory would always been the
same as host(WB); but for the assigned device, some part of memory may be used
as DMA and then set to uncacheable memory type(UC/WC), which would be a conflict of
host memory type then be a potential issue.

Snooping control can guarantee the cache correctness of memory go through the
DMA engine of VT-d.

[avi: fix build on ia64]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:50 +03:00
Gleb Natapov
78646121e9 KVM: Fix interrupt unhalting a vcpu when it shouldn't
kvm_vcpu_block() unhalts vpu on an interrupt/timer without checking
if interrupt window is actually opened.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:33 +03:00
Sheng Yang
e56d532f20 KVM: Device assignment framework rework
After discussion with Marcelo, we decided to rework device assignment framework
together. The old problems are kernel logic is unnecessary complex. So Marcelo
suggest to split it into a more elegant way:

1. Split host IRQ assign and guest IRQ assign. And userspace determine the
combination. Also discard msi2intx parameter, userspace can specific
KVM_DEV_IRQ_HOST_MSI | KVM_DEV_IRQ_GUEST_INTX in assigned_irq->flags to
enable MSI to INTx convertion.

2. Split assign IRQ and deassign IRQ. Import two new ioctls:
KVM_ASSIGN_DEV_IRQ and KVM_DEASSIGN_DEV_IRQ.

This patch also fixed the reversed _IOR vs _IOW in definition(by deprecated the
old interface).

[avi: replace homemade bitcount() by hweight_long()]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:29 +03:00
Gleb Natapov
343f94fe4d KVM: consolidate ioapic/ipi interrupt delivery logic
Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10 11:48:27 +03:00
Gleb Natapov
a53c17d21c KVM: ioapic/msi interrupt delivery consolidation
ioapic_deliver() and kvm_set_msi() have code duplication. Move
the code into ioapic_deliver_entry() function and call it from
both places.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10 11:48:27 +03:00
Christian Borntraeger
b95b51d580 KVM: declare ioapic functions only on affected hardware
Since "KVM: Unify the delivery of IOAPIC and MSI interrupts"
I get the following warnings:

  CC [M]  arch/s390/kvm/kvm-s390.o
In file included from arch/s390/kvm/kvm-s390.c:22:
include/linux/kvm_host.h:357: warning: 'struct kvm_ioapic' declared inside parameter list
include/linux/kvm_host.h:357: warning: its scope is only this definition or declaration, which is probably not what you want

This patch limits IOAPIC functions for architectures that have one.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:24 +03:00
Sheng Yang
2350bd1f62 KVM: Add MSI-X interrupt injection logic
We have to handle more than one interrupt with one handler for MSI-X. Avi
suggested to use a flag to indicate the pending. So here is it.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:23 +03:00
Sheng Yang
c1e0151429 KVM: Ioctls for init MSI-X entry
Introduce KVM_SET_MSIX_NR and KVM_SET_MSIX_ENTRY two ioctls.

This two ioctls are used by userspace to specific guest device MSI-X entry
number and correlate MSI-X entry with GSI during the initialization stage.

MSI-X should be well initialzed before enabling.

Don't support change MSI-X entry number for now.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:23 +03:00
Sheng Yang
116191b69b KVM: Unify the delivery of IOAPIC and MSI interrupts
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:22 +03:00
Gleb Natapov
4925663a07 KVM: Report IRQ injection status to userspace.
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:11 +02:00
Gerd Hoffmann
c807660407 KVM: Fix kvmclock on !constant_tsc boxes
kvmclock currently falls apart on machines without constant tsc.
This patch fixes it.  Changes:

  * keep tsc frequency in a per-cpu variable.
  * handle kvmclock update using a new request flag, thus checking
    whenever we need an update each time we enter guest context.
  * use a cpufreq notifier to track frequency changes and force
    kvmclock updates.
  * send ipis to kick cpu out of guest context if needed to make
    sure the guest doesn't see stale values.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:09 +02:00
Sheng Yang
79950e1073 KVM: Use irq routing API for MSI
Merge MSI userspace interface with IRQ routing table. Notice the API have been
changed, and using IRQ routing table would be the only interface kvm-userspace
supported.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:09 +02:00
Marcelo Tosatti
44882eed2e KVM: make irq ack notifications aware of routing table
IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.

Translate before acking.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
2009-03-24 11:03:08 +02:00
Avi Kivity
399ec807dd KVM: Userspace controlled irq routing
Currently KVM has a static routing from GSI numbers to interrupts (namely,
0-15 are mapped 1:1 to both PIC and IOAPIC, and 16:23 are mapped 1:1 to
the IOAPIC).  This is insufficient for several reasons:

- HPET requires non 1:1 mapping for the timer interrupt
- MSIs need a new method to assign interrupt numbers and dispatch them
- ACPI APIC mode needs to be able to reassign the PCI LINK interrupts to the
  ioapics

This patch implements an interrupt routing table (as a linked list, but this
can be easily changed) and a userspace interface to replace the table.  The
routing table is initialized according to the current hardwired mapping.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:06 +02:00
Avi Kivity
75858a84a6 KVM: Interrupt mask notifiers for ioapic
Allow clients to request notifications when the guest masks or unmasks a
particular irq line.  This complements irq ack notifications, as the guest
will not ack an irq line that is masked.

Currently implemented for the ioapic only.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:03 +02:00
Sheng Yang
67346440e8 KVM: Remove duplicated prototype of kvm_arch_destroy_vm
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:01 +02:00
Jan Kiszka
d0bfb940ec KVM: New guest debug interface
This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL
instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic
part, controlling the "main switch" and the single-step feature. The
arch specific part adds an x86 interface for intercepting both types of
debug exceptions separately and re-injecting them when the host was not
interested. Moveover, the foundation for guest debugging via debug
registers is layed.

To signal breakpoint events properly back to userland, an arch-specific
data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block
contains the PC, the debug exception, and relevant debug registers to
tell debug events properly apart.

The availability of this new interface is signaled by
KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are
provided.

Note that both SVM and VTX are supported, but only the latter was tested
yet. Based on the experience with all those VTX corner case, I would be
fairly surprised if SVM will work out of the box.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:49 +02:00
Sheng Yang
ad8ba2cd44 KVM: Add kvm_arch_sync_events to sync with asynchronize events
kvm_arch_sync_events is introduced to quiet down all other events may happen
contemporary with VM destroy process, like IRQ handler and work struct for
assigned device.

For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so
the state of KVM here is legal and can provide a environment to quiet down other
events.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:36 +02:00
Joerg Roedel
19de40a847 KVM: change KVM to use IOMMU API
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:11:07 +01:00
Weidong Han
b653574a7d Deassign device in kvm_free_assgined_device
In kvm_iommu_unmap_memslots(), assigned_dev_head is already empty.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:10:08 +01:00
Weidong Han
0a92035674 KVM: support device deassignment
Support device deassignment, it can be used in device hotplug.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:02:19 +01:00
Weidong Han
260782bcfd KVM: use the new intel iommu APIs
intel iommu APIs are updated, use the new APIs.

In addition, change kvm_iommu_map_guest() to just create the domain, let kvm_iommu_assign_device() assign device.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:02:19 +01:00
Mark McLoughlin
defaf1587c KVM: fix handling of ACK from shared guest IRQ
If an assigned device shares a guest irq with an emulated
device then we currently interpret an ack generated by the
emulated device as originating from the assigned device
leading to e.g. "Unbalanced enable for IRQ 4347" from the
enable_irq() in kvm_assigned_dev_ack_irq().

The fix is fairly simple - don't enable the physical device
irq unless it was previously disabled.

Of course, this can still lead to a situation where a
non-assigned device ACK can cause the physical device irq to
be reenabled before the device was serviced. However, being
level sensitive, the interrupt will merely be regenerated.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:47 +02:00
Sheng Yang
0937c48d07 KVM: Add fields for MSI device assignment
Prepared for kvm_arch_assigned_device_msi_dispatch().

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:01 +02:00
Sheng Yang
4f906c19ae KVM: Replace irq_requested with more generic irq_requested_type
Separate guest irq type and host irq type, for we can support guest using INTx
with host using MSI (but not opposite combination).

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:01 +02:00
Sheng Yang
e19e30effa KVM: IRQ ACK notifier should be used with in-kernel irqchip
Also remove unnecessary parameter of unregister irq ack notifier.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:51:47 +02:00
Sheng Yang
5550af4df1 KVM: Fix guest shared interrupt with in-kernel irqchip
Every call of kvm_set_irq() should offer an irq_source_id, which is
allocated by kvm_request_irq_source_id(). Based on irq_source_id, we
identify the irq source and implement logical OR for shared level
interrupts.

The allocated irq_source_id can be freed by kvm_free_irq_source_id().

Currently, we support at most sizeof(unsigned long) different irq sources.

[Amit: - rebase to kvm.git HEAD
       - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file
       - move kvm_request_irq_source_id to the update_irq ioctl]

[Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-28 14:21:34 +02:00
Xiantao Zhang
3de42dc094 KVM: Separate irq ack notification out of arch/x86/kvm/irq.c
Moving irq ack notification logic as common, and make
it shared with ia64 side.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:35 +02:00
Xiantao Zhang
c77fb9dc7a KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs
Add a kvm_ prefix to avoid polluting kernel's name space.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:34 +02:00
Xiantao Zhang
8a98f6648a KVM: Move device assignment logic to common code
To share with other archs, this patch moves device assignment
logic to common parts.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:33 +02:00
Marcelo Tosatti
4731d4c7a0 KVM: MMU: out of sync shadow core
Allow guest pagetables to go out of sync.  Instead of emulating write
accesses to guest pagetables, or unshadowing them, we un-write-protect
the page table and allow the guest to modify it at will.  We rely on
invlpg executions to synchronize individual ptes, and will synchronize
the entire pagetable on tlb flushes.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15 14:25:25 +02:00
Ben-Ami Yassour
62c476c7c7 KVM: Device Assignment with VT-d
Based on a patch by: Kay, Allen M <allen.m.kay@intel.com>

This patch enables PCI device assignment based on VT-d support.
When a device is assigned to the guest, the guest memory is pinned and
the mapping is updated in the VT-d IOMMU.

[Amit: Expose KVM_CAP_IOMMU so we can check if an IOMMU is present
and also control enable/disable from userspace]

Signed-off-by: Kay, Allen M <allen.m.kay@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Amit Shah <amit.shah@qumranet.com>

Acked-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:04 +02:00
Marcelo Tosatti
d76901750a KVM: x86: do not execute halted vcpus
Offline or uninitialized vcpu's can be executed if requested to perform
userspace work.

Follow Avi's suggestion to handle halted vcpu's in the main loop,
simplifying kvm_emulate_halt(). Introduce a new vcpu->requests bit to
indicate events that promote state from halted to running.

Also standardize vcpu wake sites.

Signed-off-by: Marcelo Tosatti <mtosatti <at> redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:26 +02:00
Hollis Blanchard
d98e634635 KVM: Move KVM TRACE DEFINITIONS to common header
Move KVM trace definitions from x86 specific kvm headers to common kvm
headers to create a cross-architecture numbering scheme for trace
events. This means the kvmtrace_format userspace tool won't need to know
which architecture produced the log file being processed.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:12 +02:00
Andrea Arcangeli
e930bffe95 KVM: Synchronize guest physical memory map to host virtual memory map
Synchronize changes to host virtual addresses which are part of
a KVM memory slot to the KVM shadow mmu.  This allows pte operations
like swapping, page migration, and madvise() to transparently work
with KVM.

Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-29 12:33:53 +03:00
Marcelo Tosatti
34d4cb8fca KVM: MMU: nuke shadowed pgtable pages and ptes on memslot destruction
Flush the shadow mmu before removing regions to avoid stale entries.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:42:40 +03:00
Laurent Vivier
5f94c1741b KVM: Add coalesced MMIO support (common part)
This patch adds all needed structures to coalesce MMIOs.
Until an architecture uses it, it is not compiled.

Coalesced MMIO introduces two ioctl() to define where are the MMIO zones that
can be coalesced:

- KVM_REGISTER_COALESCED_MMIO registers a coalesced MMIO zone.
  It requests one parameter (struct kvm_coalesced_mmio_zone) which defines
  a memory area where MMIOs can be coalesced until the next switch to
  user space. The maximum number of MMIO zones is KVM_COALESCED_MMIO_ZONE_MAX.

- KVM_UNREGISTER_COALESCED_MMIO cancels all registered zones inside
  the given bounds (bounds are also given by struct kvm_coalesced_mmio_zone).

The userspace client can check kernel coalesced MMIO availability by asking
ioctl(KVM_CHECK_EXTENSION) for the KVM_CAP_COALESCED_MMIO capability.
The ioctl() call to KVM_CAP_COALESCED_MMIO will return 0 if not supported,
or the page offset where will be stored the ring buffer.
The page offset depends on the architecture.

After an ioctl(KVM_RUN), the first page of the KVM memory mapped points to
a kvm_run structure. The offset given by KVM_CAP_COALESCED_MMIO is
an offset to the coalesced MMIO ring expressed in PAGE_SIZE relatively
to the address of the start of th kvm_run structure. The MMIO ring buffer
is defined by the structure kvm_coalesced_mmio_ring.

[akio: fix oops during guest shutdown]

Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:42:31 +03:00
Laurent Vivier
92760499d0 KVM: kvm_io_device: extend in_range() to manage len and write attribute
Modify member in_range() of structure kvm_io_device to pass length and the type
of the I/O (write or read).

This modification allows to use kvm_io_device with coalesced MMIO.

Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:42:30 +03:00
Avi Kivity
7cc8883074 KVM: Remove decache_vcpus_on_cpu() and related callbacks
Obsoleted by the vmx-specific per-cpu list.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:42:25 +03:00
Marcelo Tosatti
06e0564566 KVM: close timer injection race window in __vcpu_run
If a timer fires after kvm_inject_pending_timer_irqs() but before
local_irq_disable() the code will enter guest mode and only inject such
timer interrupt the next time an unrelated event causes an exit.

It would be simpler if the timer->pending irq conversion could be done
with IRQ's disabled, so that the above problem cannot happen.

For now introduce a new vcpu requests bit to cancel guest entry.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-24 12:16:59 +03:00
Marcelo Tosatti
2f5997140f KVM: migrate PIT timer
Migrate the PIT timer to the physical CPU which vcpu0 is scheduled on,
similarly to what is done for the LAPIC timers, otherwise PIT interrupts
will be delayed until an unrelated event causes an exit.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-06 21:25:51 +03:00
Al Viro
66c0b394f0 KVM: kill file->f_count abuse in kvm
Use kvm own refcounting instead of playing with ->filp->f_count.
That will allow to get rid of a lot of crap in anon_inode_getfd() and
kill a race in kvm_dev_ioctl_create_vm() (file might have been closed
immediately by another thread, so ->filp might point to already freed
struct file when we get around to setting it).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 18:21:46 +03:00
Hollis Blanchard
76f7c87902 KVM: Rename debugfs_dir to kvm_debugfs_dir
It's a globally exported symbol now.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 18:21:36 +03:00
Marcelo Tosatti
62d9f0dbc9 KVM: add ioctls to save/store mpstate
So userspace can save/restore the mpstate during migration.

[avi: export the #define constants describing the value]
[christian: add s390 stubs]
[avi: ditto for ia64]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 18:21:16 +03:00
Marcelo Tosatti
3d80840d96 KVM: hlt emulation should take in-kernel APIC/PIT timers into account
Timers that fire between guest hlt and vcpu_block's add_wait_queue() are
ignored, possibly resulting in hangs.

Also make sure that atomic_inc and waitqueue_active tests happen in the
specified order, otherwise the following race is open:

CPU0                                        CPU1
                                            if (waitqueue_active(wq))
add_wait_queue()
if (!atomic_read(pit_timer->pending))
    schedule()
                                            atomic_inc(pit_timer->pending)

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:04:11 +03:00
Feng(Eric) Liu
d4c9ff2d1b KVM: Add kvm trace userspace interface
This interface allows user a space application to read the trace of kvm
related events through relayfs.

Signed-off-by: Feng (Eric) Liu <eric.e.liu@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:01:22 +03:00
Anthony Liguori
35149e2129 KVM: MMU: Don't assume struct page for x86
This patch introduces a gfn_to_pfn() function and corresponding functions like
kvm_release_pfn_dirty().  Using these new functions, we can modify the x86
MMU to no longer assume that it can always get a struct page for any given gfn.

We don't want to eliminate gfn_to_page() entirely because a number of places
assume they can do gfn_to_page() and then kmap() the results.  When we support
IO memory, gfn_to_page() will fail for IO pages although gfn_to_pfn() will
succeed.

This does not implement support for avoiding reference counting for reserved
RAM or for IO memory.  However, it should make those things pretty straight
forward.

Since we're only introducing new common symbols, I don't think it will break
the non-x86 architectures but I haven't tested those.  I've tested Intel,
AMD, NPT, and hugetlbfs with Windows and Linux guests.

[avi: fix overflow when shifting left pfns by adding casts]

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:01:15 +03:00