Commit Graph

37 Commits

Author SHA1 Message Date
Thomas Gleixner
8593fbc68b [MTD] Rework the out of band handling completely
Hopefully the last iteration on this!

The handling of out of band data on NAND was accompanied by tons of fruitless
discussions and halfarsed patches to make it work for a particular
problem. Sufficiently annoyed by I all those "I know it better" mails and the
resonable amount of discarded "it solves my problem" patches, I finally decided
to go for the big rework. After removing the _ecc variants of mtd read/write
functions the solution to satisfy the various requirements was to refactor the
read/write _oob functions in mtd.

The major change is that read/write_oob now takes a pointer to an operation
descriptor structure "struct mtd_oob_ops".instead of having a function with at
least seven arguments.

read/write_oob which should probably renamed to a more descriptive name, can do
the following tasks:

- read/write out of band data
- read/write data content and out of band data
- read/write raw data content and out of band data (ecc disabled)

struct mtd_oob_ops has a mode field, which determines the oob handling mode.

Aside of the MTD_OOB_RAW mode, which is intended to be especially for
diagnostic purposes and some internal functions e.g. bad block table creation,
the other two modes are for mtd clients:

MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is
described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's
up to the caller to make sure that the byte positions are not used by the ECC
placement algorithms.

MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in
the out of band area which are described by the oobfree tuples in the ecclayout
data structre which is associated to the devicee.

The decision whether data plus oob or oob only handling is done depends on the
setting of the datbuf member of the data structure. When datbuf == NULL then
the internal read/write_oob functions are selected, otherwise the read/write
data routines are invoked.

Tested on a few platforms with all variants. Please be aware of possible
regressions for your particular device / application scenario

Disclaimer: Any whining will be ignored from those who just contributed "hot
air blurb" and never sat down to tackle the underlying problem of the mess in
the NAND driver grown over time and the big chunk of work to fix up the
existing users. The problem was not the holiness of the existing MTD
interfaces. The problems was the lack of time to go for the big overhaul. It's
easy to add more mess to the existing one, but it takes alot of effort to go
for a real solution.

Improvements and bugfixes are welcome!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner
5bd34c091a [MTD] NAND Replace oobinfo by ecclayout
The nand_oobinfo structure is not fitting the newer error correction
demands anymore. Replace it by struct nand_ecclayout and fixup the users
all over the place. Keep the nand_oobinfo based ioctl for user space
compability reasons.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:50 +02:00
Thomas Gleixner
ff268fb879 [MTD] NAND Consolidate oobinfo handling
The info structure for out of band data was copied into
the mtd structure. Make it a pointer and remove the ability
to set it from userspace. The position of ecc bytes is
defined by the hardware and should not be changed by software.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:49 +02:00
Thomas Gleixner
9223a456da [MTD] Remove read/write _ecc variants
MTD clients are agnostic of FLASH which needs ECC suppport.
Remove the functions and fixup the callers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 17:21:03 +02:00
Thomas Gleixner
2528e8cdf3 [MTD] Remove readv/readv_ecc
These functions were never implemented and added only bloat to
partition and concat code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 16:10:00 +02:00
Thomas Gleixner
9d8522df37 [MTD] Remove nand writev support
NAND writev(_ecc) support is not longer necessary. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 16:06:03 +02:00
Joern Engel
5fa433942b [MTD] Introduce MTD_BIT_WRITEABLE
o Add a flag MTD_BIT_WRITEABLE for devices that allow single bits to be
  cleared.
o Replace MTD_PROGRAM_REGIONS with a cleared MTD_BIT_WRITEABLE flag for
  STMicro and Intel Sibley flashes with internal ECC.  Those flashes
  disallow clearing of single bits, unlike regular NOR flashes, so the
  new flag models their behaviour better.
o Remove MTD_ECC.  After the STMicro/Sibley merge, this flag is only set
  and never checked.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-22 23:18:29 +02:00
Joern Engel
28318776a8 [MTD] Introduce writesize
At least two flashes exists that have the concept of a minimum write unit,
similar to NAND pages, but no other NAND characteristics.  Therefore, rename
the minimum write unit to "writesize" for all flashes, including NAND.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-22 23:18:05 +02:00
Kyungmin Park
752870707f OneNAND: fix block command typo
We need to check block cmd only instead with comparing with cmd

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:51 +01:00
Kyungmin Park
493c646077 OneNAND: One-Time Programmable (OTP) support
One Block of the NAND Flash Array memory is reserved as
a One-Time Programmable Block memory area.
Also, 1st Block of NAND Flash Array can be used as OTP.

The OTP block can be read, programmed and locked using the same
operations as any other NAND Flash Array memory block.
OTP block cannot be erased.

OTP block is fully-guaranteed to be a valid block.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:50 +01:00
Kyungmin Park
3cecf69ecd OneNAND: Handle erase correctly in Double Density Package (DDP)
There's erase bug in DDP.
We need to add DDP select in erase

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:48 +01:00
Kyungmin Park
34c1060959 OneNAND: Write oob area with aligned size, mtd->oobsize
There's some problem with write oob in serveral platform.
So we write oob with oobsize aligned (16bytes) instead of 3 bytes (from {2,
3})

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:47 +01:00
Kyungmin Park
8e6ec69059 OneNAND: Add write_oob verify function
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
2006-05-12 15:35:47 +01:00
Jarkko Lavinen
d9777f1c42 OneNand: Fix free byte positions.
Some free byte positions at onenand_oob_64 were wrong. This was also
reported by Christian Lehne. 3 byte slots are at 2+16*i and 2 byte
slots at 14+16*i.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
2006-05-12 15:35:46 +01:00
Kyungmin Park
9c01f87db1 OneNAND: handle byte access on BufferRAM
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:45 +01:00
Kyungmin Park
628bee6593 OneNAND: Add touch_softlock_watchdog()
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:45 +01:00
Tim Schmielau
de25968cc8 [PATCH] fix more missing includes
Include fixes for 2.6.14-git11.  Should allow to remove sched.h from
module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390.  Probably more
to come since I haven't yet checked the other archs.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:45 -08:00
Kyungmin Park
27f4e08347 [PATCH] mtd onenand driver: use platform_device.h instead device.h
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18 16:29:11 -08:00
Kyungmin Park
532a37cf8d [PATCH] mtd onenand driver: reduce stack usage
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18 16:28:24 -08:00
Kyungmin Park
20ba89a361 [PATCH] mtd onenand driver: fix unlock problem in DDP 2005-12-18 16:28:23 -08:00
Kyungmin Park
37b1cc3910 [PATCH] mtd onenand driver: check correct manufacturer
This (and the three subsequent patches) is working well on OMAP H4 with
2.6.15-rc4 kernel and passes the LTP fs test.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18 16:28:23 -08:00
Andrew Morton
015953d706 [PATCH] mtd: onenand_base needs sched.h
drivers/mtd/onenand/onenand_base.c: In function `onenand_wait':
drivers/mtd/onenand/onenand_base.c:293: error: `jiffies' undeclared (first use in this function)
drivers/mtd/onenand/onenand_base.c:293: error: (Each undeclared identifier is reported only once
drivers/mtd/onenand/onenand_base.c:293: error: for each function it appears in.)
drivers/mtd/onenand/onenand_base.c:293: error: implicit declaration of function `msecs_to_jiffies'
drivers/mtd/onenand/onenand_base.c:294: error: implicit declaration of function `time_before'
drivers/mtd/onenand/onenand_base.c:301: error: implicit declaration of function `cond_resched'
drivers/mtd/onenand/onenand_base.c: In function `onenand_get_device':
drivers/mtd/onenand/onenand_base.c:522: error: implicit declaration of function `set_current_state'
drivers/mtd/onenand/onenand_base.c:522: error: `TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
drivers/mtd/onenand/onenand_base.c:525: error: implicit declaration of function `schedule'
drivers/mtd/onenand/onenand_base.c: In function `onenand_release_device':
drivers/mtd/onenand/onenand_base.c:545: error: `TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
drivers/mtd/onenand/onenand_base.c:545: error: `TASK_INTERRUPTIBLE' undeclared (first use in this function)

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:50 -08:00
Thomas Gleixner
d5c5e78af5 [MTD] OneNAND: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 15:11:28 +01:00
Thomas Gleixner
46d0d0fb61 [MTD] OneNAND/Kconfig: Fix dependencies
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 01:14:05 +01:00
Thomas Gleixner
f0250fd7c3 Revert "[PATCH] OneNAND: Add simulator"
This reverts 405c829f98 commit.
2005-11-07 01:11:04 +01:00
Kyungmin Park
83a368380e [MTD] OneNAND: Enhanced support for DDP (Dual Densitiy Packages)
Add density mask for better support of DDP chips.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:59:48 +01:00
Kyungmin Park
a41371eb6d [MTD] OneNAND: Power Management (PM) support
Add suspend/resume

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:42:28 +01:00
Kyungmin Park
87590e26ff [MTD] OneNAND: Add missing files
Simple bad block table source and header files

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:39:23 +01:00
Kyungmin Park
1b01d9798d OneNAND: Remove OMAP platform driver
Now we can use the generic platform driver

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:35:12 +01:00
Kyungmin Park
68ee4b1c50 [MTD] OneNAND: Add generic platform driver
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:33:11 +01:00
Kyungmin Park
1501787675 [MTD] OneNAND: Remove experimental Kconfig dependency
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:25:42 +01:00
Kyungmin Park
d36d63d404 [PATCH] OneNAND: Fix bug in write verify
- Remove unused block, page parameters
- Add constant instead of runtime value

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:24:51 +01:00
Kyungmin Park
405c829f98 [PATCH] OneNAND: Add simulator
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:23:10 +01:00
Kyungmin Park
fcc31470c4 [PATCH] OneNAND: Update OMAP OneNAND mapping using device driver model
- Update OMAP OneNAND mapping file using device driver model
- Remove board specific macro and values.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:22:01 +01:00
Kyungmin Park
cdc001305d [PATCH] OneNAND: Simple Bad Block handling support
Based on NAND memory bad block table code

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:20:53 +01:00
Kyungmin Park
52b0eea73d [PATCH] OneNAND: Sync. Burst Read support
Add OneNAND Sync. Burst Read support
Tested with OMAP platform

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:19:37 +01:00
Kyungmin Park
cd5f6346bc [MTD] Add initial support for OneNAND flash chips
OneNAND is a new flash technology from Samsung with integrated SRAM
buffers and logic interface.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:17:24 +01:00