Commit Graph

8151 Commits

Author SHA1 Message Date
Andrew Victor
f21738341c [ARM] 3867/1: AT91 GPIO update
This patch makes the AT91 gpio.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The GPIO controllers supported by a particular AT91
processor are defined in the processor-specific file and are registered
with gpio.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:53:47 +01:00
Andrew Victor
2eeaaa21de [ARM] 3866/1: AT91 clock update
This patch makes the AT91 clock.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The clocks supported by a particular AT91 processor
are defined in the processor-specific file and are registered with
clock.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:52:06 +01:00
Andrew Victor
72729910c3 [ARM] 3865/1: AT91RM9200 header updates
This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:52:05 +01:00
David Anders
26f908186f [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
this patch registers the wakeup irq, sets a gpio pin to indicate the
status of system for suspend/resume operations, and adds the machine to
the supported machines for use with the simtec-pm

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 23:44:33 +01:00
Serge E. Hallyn
ea33a59802 [ARM] kthread: switch arch/arm/kernel/apm.c
Switch arch/arm/kernel/apm.c from using kernel_thread - whose export
is deprecated - to kthread.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 23:17:54 +01:00
Eric Sesterhenn
d1d8f7dec1 [ARM] Off-by-one in arch/arm/common/icst*
hi,

a quick find -iname \*.[ch] | xargs grep "> ARRAY_SIZE(", revealed
these in the icst drivers.
If i == ARRAY_SIZE, we get past the idx2s array.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 23:17:54 +01:00
Dirk Opfer
576b3ef249 [ARM] 3864/1: Refactore sharpsl_pm
This patch adds another hook into sharpsl_pm to notify the machine
specific driver immediately after resume. This is needed to support the Sharp SL-6000 (Tosa).

Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 20:59:22 +01:00
Dirk Opfer
a2025e7f73 [ARM] 3863/1: Add Locomo SPI Device
The Locomo chip has a SPI interface which is used for SD/MMC cards (only collie).
This patch adds the definition for the SPI device inside the Locomo chip.

Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 20:59:00 +01:00
Richard Purdie
8d48427ecb [ARM] 3847/2: Convert LOMOMO to use struct device for GPIOs
Convert LOMOMO to use struct device * for GPIOs instead of struct
locomo_dev. This enables access to the GPIOs from code which is not
a locomo device itself (such as audio). Access for gpio 31 is removed
for error handling (no such hardware exists).

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 20:58:59 +01:00
Russell King
2dc94310bd Merge master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-upstream into devel 2006-09-27 19:57:54 +01:00
Paul Brook
c06015148f [ARM] 3860/1: Versatile PCI config byte accesses
The ARM Versatile board PCI config space read routines are broken for byte
accesses.  The access uses a byte read, so masking the bottom two bits of the
address is wrong.

I guess this is a cut/paste error from the the halfword code which uses
aligned word access+shift+mask.

Signed-off-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 09:35:07 +01:00
George G. Davis
4052ebb7a2 [ARM] 3859/1: Fix devicemaps_init() XIP_KERNEL odd 1MiB XIP_PHYS_ADDR translation error
The ARM XIP_KERNEL map created in devicemaps_init() is wrong.
The map.pfn is rounded down to an even 1MiB section boundary
which results in va/pa translations errors when XIP_PHYS_ADDR
starts on an odd 1MiB boundary and this causes the kernel to
hang.  This patch fixes ARM XIP_KERNEL translation errors for
the odd 1MiB XIP_PHYS_ADDR boundary case.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 09:35:05 +01:00
Ben Dooks
4b053e7a32 [ARM] 3858/1: S3C2412: power management code
Add S3C2412 power management code, and move the
core register saving in from s3c2412.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 09:35:04 +01:00
David Anders
da56c94926 [ARM] 3854/2: S3C2410 - add machine type for AML M5900 series (resubmitted)
Add the AML M5900 series to the list of supported machines in the
arch/arm/mach-s3c2410 directory. This ensures the core peripherals
are registered, and the timer source is configured. if selected in
the kernel config the framebuffer registers and mtd partition
information are set.  This version of the patch has corrected
formatting and removed the legacy procfs directory entry.

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 09:35:03 +01:00
Tony Lindgren
fb60cf4ab5 ARM: OMAP: Remove common pm.c
There is now separate pm.c for OMAP1 and OMAP2.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 13:28:17 +03:00
Tony Lindgren
90afd5cb2a ARM: OMAP: Sync clocks with linux-omap tree
Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a
patch from Imre Deak to make McSPI clocks use id.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 13:27:20 +03:00
Komal Shah
1630b52ddf [PATCH] ARM: OMAP: Check gpio_fck not gpio_ick
Check gpio_fck not gpio_ick.

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:51:08 +03:00
Tony Lindgren
709eb3e5cc ARM: OMAP: Sync DMA with linux-omap tree
This patch syncs OMAP DMA code with linux-omap tree.
Mostly allow changing DMA callback function and set
OMAP2 specific transfer mode.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:45:45 +03:00
Juha Yrjola
ddc32a8749 ARM: OMAP2: Make sure peripherals can be accessed after clk_enable
Some peripherals seem to need additional delay until they
can actually be accessed after enabling their FCLK and ICLK.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:50 +03:00
Juha Yrjola
dc0d794e48 ARM: OMAP2: Keep both APLLs active during bootup
Enabling and disabling the 54 MHz and 96 MHz APLLs can happen
unnecessarily often during bootup. Make sure they're kept
enabled during init.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:49 +03:00
Juha Yrjola
dee45648a5 ARM: OMAP: Add sanity check to clk_disable
BUG() if the clock use count is already zero.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:47 +03:00
Hiroshi DOYU
bee7930f4a ARM: OMAP: GPIO: IRQSTATUS2 workaround for retention state
In OMAP2420, an incoming GPIO interrupt always sets both GPIO_IRQSTATUS1
and GPIO_IRQSTATUS2, even if the relevant bit is disabled in
GPIO_IRQENABLE1/2 and DSP doesn't use GPIO at all. GPIO_IRQSTATUS1
is for MPU and GPIO_IRQSTATUS2 is for DSP. If IRQSTATUS is set, this
will prevent the system from going to idle state. This patch also clears
IRQSTATUS2 to avoid the above situation.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:46 +03:00
Tony Lindgren
0d9356cbb5 ARM: OMAP: Fix typo for 24xx GPIO resume
Fix typo for 24xx GPIO resume

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:45 +03:00
Juha Yrjola
39020842b3 ARM: OMAP: OMAP2 dmtimer power management support
GPT1 will be set into non-posted mode, and the wakeup register
is set for all timers.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:44 +03:00
Juha Yrjola
ab0a2b9b9f ARM: OMAP: Add support for forcing osc_ck on
Some boards might use the oscillator clock for powering
external peripherals. Add support for making sure osc_ck
stays active even when trying to go to sleep.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:43 +03:00
Timo Teras
12583a70ac ARM: OMAP: Add enable/disable functions for dmtimer
Add enable/disable functions which effectively control the GPT iclk and fclk.

Signed-off-by: Timo Teras <timo.teras@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:42 +03:00
David Brownell
893a668ee2 ARM: OMAP: Remove Remove superfluous/recursive locking for GPIO
Remove Remove superfluous/recursive locking for GPIO

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:41 +03:00
Tony Lindgren
14188b3a4c ARM: OMAP: Fix spinlock recursion for dyntick
Fix spinlock recursion for dyntick. Modified version based
on Imre Deak's earlier patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:40 +03:00
Komal Shah
e4d5ee8109 ARM: OMAP: Remove IVA IRQ bank
ARM11 can't access the IVA interrupt controller from
IVA slave port.

From Richard Woodruff:

"The 0x40000000 is an IVA-ARM7 local bus address.
The IVA-INTC is NOT accessible through the IVA-L3-Slave Port.
The current TRM does say this directly and indirectly in a few spots and
in figures."

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:39 +03:00
Tony Lindgren
4196dd6baa ARM: OMAP: Reset GPIO irq state after free_irq()
This is needed to reset GPIO after free_irq().

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:38 +03:00
Juha Yrjola
eaca33df44 ARM: OMAP: Add write memory barriers to OMAP2 clock code
After adjusting clock parameters, OMAP2 CPUs need a memory
barrier to make sure the changes go into effect immediately.
Otherwise bad things will happen if we try to access the
peripheral whose clock is just being enabled.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:37 +03:00
Samuel Ortiz
dbab288be4 ARM: OMAP: Fix OMAP2 clock.c typo
A forgotten parenthesis in clock.c caused the PLL stabilization loop
to not be executed correctly.

Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:36 +03:00
Timo Teras
fa4bb626c6 ARM: OMAP: Use GPT iclk only when needed
This patch makes the OMAP2 dmtimers module using the interface
clocks only while the registers are accessed (except GPT1 which has
iclk enabled all the time).

Signed-off-by: Timo Teras <timo.teras@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:35 +03:00
Tony Lindgren
123e9a5573 ARM: OMAP: DMA source and destination addresses are unsigned
Also export some omap24xx specific DMA functions.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:34 +03:00
Imre Deak
f37e4580c4 ARM: OMAP2: Dynamic allocator for GPMC memory space
Add support for assigning memory regions dynamically to peripherals
attached to GPMC interface. Platform specific code should now call
gpmc_cs_request to get a free GPMC memory region instead of using
a fixed address.

Make the H4 and Apollon platform initialization use the new API.

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:33 +03:00
Jonathan McDowell
193e68be33 ARM: OMAP: Fix OMAP1 compilation after MPUIO check change
The recent MPUIO range change fix breaks compilation if
CONFIG_ARCH_OMAP24XX isn't defined; it should be OMAP_MAX_GPIO_LINES not
MAX_GPIO_LINES I believe. This one liner fixes it.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:30 +03:00
Mark Howell
75a1d10e2f ARM: OMAP: mux: add config for 16xx SPI pins
This patch adds pin mux info for the SPI master/slave interface on
OMAP16xx. Data from OMAP 1611/1612 TRM and errata. Works for me on my
1611/H2 with current git kernel.

Signed-off-by: Mark Howell <mhowell@northlink.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:29 +03:00
Imre Deak
b5beef5d5d ARM: OMAP: Sleep is prevented when no LCD is attached
We have to make sure that the LCD DMA external destination bit is
cleared by default, otherwise OMAP won't sleep.

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:28 +03:00
Imre Deak
5a4e86daa2 ARM: OMAP: GPIO: fix MPUIO check
- MPUIO doesn't exist on OMAP2
- no error was returned for too big MPUIO numbers

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:27 +03:00
Tony Lindgren
0e0a198690 ARM: OMAP: Remove sys_ck and sys_clkout from McBSP for 24xx
McBSP does not need sys_ck or sys_clkout. If the devices connected
to McBSP need sys_clkout, they need to request it.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:26 +03:00
Kyungmin Park
abc45e1d69 ARM: OMAP: Apollon MMC support
Apollon board MMC supports on OMAP2

TODO:
        We have to check MMC on H4

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:25 +03:00
Kevin Hilman
d1284b5f11 ARM: OMAP: 2420 boot BUG(): failure to map SRAM
ARM: OMAP: Fix SRAM static mapping for EMU devices.

Fix SRAM static mapping for EMU devices.

Signed-off-by: Kevin Hilman <khilman@deeprooted.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:24 +03:00
Imre Deak
df51a84d93 ARM: OMAP: timer32k: fix tick count calculation when reprogramming
Reprogramming takes places before putting the CPU into idle mode if
the dynamic tick option is enabled. The timer is then set to expire
at the next pending timer event. Because some time has already passed
since the last reported jiffy we have to wait less than the time
specified in jiffies.

Also make sure we don't set a load value of 0 whose outcome is
unspecified according to the TRM.

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:21 +03:00
Tony Lindgren
ae78dcf79a ARM: OMAP: Avoid sleeping during arch_reset
If we call clk_get() from arch_reset we get ugly messages before
reboot.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:20 +03:00
Tony Lindgren
7d95ded911 [ARM] 3838/1: ARM: DCC debug console support for ARM11
Adds support for CONFIG_DEBUG_ICEDCC for ARM11.
Tested on ARM1136 (OMAP2420).

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:36:09 +01:00
Russell King
baf97ce6ed [ARM] Cleanups for 4cc9bd2eaa
- Document the meaning for OP_SCALAR, OP_SD and add OP_DD.
- Formatting cleanups
- Remove now redundant code for making compare instructions
  operate on scalar values.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:34:59 +01:00
Gen FUKATSU
4cc9bd2eaa [ARM] 3789/4: Fix VFP emulation to ignore VECITR for scalar instruction
VECITR in Floating-Point Exception register indicates the number of
remaining short vector iterations after a potential exception was
detected.

In case of exception caused by scalar instructions, VECITR is NOT updated.
Therefore emulation for VFP must ignore VECITR field
and treat "veclen" as zero when recognizing scalar instructing.

Signed-off-by: Gen Fukatsu <fukatsu.gen@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:34:06 +01:00
Dan Fandrich
f8c440b209 [ARM] 3792/2: Fix description of ZBOOT_ROM_BSS
The documentation for the ZBOOT_ROM_BSS config option describes it as
"The base address of 64KiB of read/write memory in the target for the
ROM-able zImage..." In actuality, it requires more than 100 KiB of
space in addition to enough space to hold the decompressed kernel.
This patch fixes the description in the Kconfig file.

Signed-off-by: Dan Fandrich <dfandrich@intrinsyc.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:34:05 +01:00
George G. Davis
a71ebdfa52 [ARM] 3853/1: Fix flush_ptrace_access() thinko for nonaliasing VIPT cache case
Fix thinko in the flush_ptrace_access() "if (expr)" for the ARM
VIPT non-aliasing cache case.  We only need to flush cache when
VM_EXEC is set in vma->vm_flags but "if (expr) always evaluates
to true on UP systems for the ARM VIPT non-aliasing cache case.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:34:04 +01:00
Lennert Buytenhek
0c92e830bd [ARM] 3851/1: iop3xx: add io-data glantank support
Add support for the IO-Data GLAN Tank, from Martin Michlmayr.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:34:02 +01:00