Commit Graph

63 Commits

Author SHA1 Message Date
Nishanth Aravamudan
66c006a551 [PATCH] drivers/md: fix-up schedule_timeout() usage
Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:57 -08:00
Jens Axboe
a362357b6c [BLOCK] Unify the seperate read/write io stat fields into arrays
Instead of having ->read_sectors and ->write_sectors, combine the two
into ->sectors[2] and similar for the other fields. This saves a branch
several places in the io path, since we don't have to care for what the
actual io direction is. On my x86-64 box, that's 200 bytes less text in
just the core (not counting the various drivers).

Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-01 09:26:16 +01:00
NeilBrown
72626685dc [PATCH] md: add write-intent-bitmap support to raid5
Most awkward part of this is delaying write requests until bitmap updates have
been flushed.

To achieve this, we have a sequence number (seq_flush) which is incremented
each time the raid5 is unplugged.

If the raid thread notices that this has changed, it flushes bitmap changes,
and assigned the value of seq_flush to seq_write.

When a write request arrives, it is given the number from seq_write, and that
write request may not complete until seq_flush is larger than the saved seq
number.

We have a new queue for storing stripes which are waiting for a bitmap flush
and an extra flag for stripes to record if the write was 'degraded' and so
should not clear the a bit in the bitmap.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:39:12 -07:00
NeilBrown
e5dcdd80a6 [PATCH] md: fail IO request to md that require a barrier.
md does not yet support BIO_RW_BARRIER, so be honest about it and fail
(-EOPNOTSUPP) any such requests.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:39:09 -07:00
NeilBrown
b158156618 [PATCH] md: make sure raid5/raid6 resync uses correct 'max_sectors'
The default resync_max_sector is set to "mddev->size << 1".  If the
raid-personality-module updates mddev->size, it must update
resync_max_sectors too.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 19:14:01 -07:00
NeilBrown
4b5c7ae837 [PATCH] md: when resizing an array, we need to update resync_max_sectors as well as size
Without this, and attempt to 'grow' an array will claim to have synced the
extra part without actually having done anything.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:48 -07:00
NeilBrown
3d310eb7b3 [PATCH] md: fix deadlock due to md thread processing delayed requests.
Before completing a 'write' the md superblock might need to be updated.
This is best done by the md_thread.

The current code schedules this up and queues the write request for later
handling by the md_thread.

However some personalities (Raid5/raid6) will deadlock if the md_thread
tries to submit requests to its own array.

So this patch changes things so the processes submitting the request waits
for the superblock to be written and then submits the request itself.

This fixes a recently-created deadlock in raid5/raid6

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:46 -07:00
NeilBrown
57afd89f98 [PATCH] md: improve the interface to sync_request
1/ change the return value (which is number-of-sectors synced)
 from 'int' to 'sector_t'.
 The number of sectors is usually easily small enough to fit
 in an int, but if resync needs to abort, it may want to return
 the total number of remaining sectors, which could be large.
 Also errors cannot be returned as negative numbers now, so use
 0 instead
2/ Add a 'skipped' return parameter to allow the array to report
 that it skipped the sectors.  This allows md to take this into account
 in the speed calculations.
 Currently there is no important skipping, but the bitmap-based-resync
 that is coming will use this.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:43 -07:00
NeilBrown
06d91a5fe0 [PATCH] md: improve locking on 'safemode' and move superblock writes
When md marks the superblock dirty before a write, it calls
generic_make_request (to write the superblock) from within
generic_make_request (to write the first dirty block), which could cause
problems later.

With this patch, the superblock write is always done by the helper thread, and
write request are delayed until that write completes.

Also, the locking around marking the array dirty and writing the superblock is
improved to avoid possible races.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:43 -07:00
NeilBrown
fca4d848f0 [PATCH] md: merge md_enter_safemode into md_check_recovery
md_enter_safemode checks if it is time to mark the md superblock as 'clean'.
i.e.  if all writes have completed and a suitable delay has passed.

This is currently called from md_handle_safemode which in-turn is called
(almost) every time md_check_recovery is called, and from the end of
md_do_sync which causes the mddev->thread to run, which will always call
md_check_recovery as well.

So it doesn't need to be a separate function and fits quite well into
md_check_recovery.

The "almost" is because multipathd calls md_check_recovery but not
md_handle_safemode.  This is OK because the code from md_enter_safemode is a
no-op if mddev->safemode == 0, which it always is for a multipathd (providing
we don't allow it to be set to 2 on a signal...)

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:42 -07:00
NeilBrown
7a5febe9ff [PATCH] md: set the unplug_fn and issue_flush_fn for md devices *after* committed to creation
We we set the too early, they may still be in place and possibly get called
even though the array didn't get set up properly.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:12 -07:00
Paul E. McKenney
fbd568a3e6 [PATCH] Change synchronize_kernel to _rcu and _sched
This patch changes calls to synchronize_kernel(), deprecated in the earlier
"Deprecate synchronize_kernel, GPL replacement" patch to instead call the new
synchronize_rcu() and synchronize_sched() APIs.

Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:04 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00