Commit Graph

60 Commits

Author SHA1 Message Date
Grant Likely
d4eac7501f [POWERPC] Remove unused CONFIG_WANT_DEVICE_TREE
CONFIG_DEVICE_TREE was the only user of CONFIG_WANT_DEVICE_TREE but
it was removed in commit id 2543133381
(bootwrapper: Build multiple cuImages).

This removes CONFIG_WANT_DEVICE_TREE from Kconfig and the defconfigs.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-14 22:11:03 +11:00
Jon Loeliger
0367aad1ad [POWERPC] Fix storcenter DTS typos, feedback, IRQs.
Cleaned up IRQ layout and removed unsused ISU allocations.
Fixed RTC address typo from /dts-v1/ conversion.
Incorporated list suggestions to use an "iomega," vendor prefix,
and to use a node reference rather than a hard path.

Signed-off-by: Jon Loeliger <jdl@@jdl.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05 23:33:46 -06:00
Grant Likely
ca956f0ea8 [POWERPC] 82xx and embedded6xx: Use machine_*_initcall() hooks in platform code
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:30:41 -06:00
Jon Loeliger
3490cba56f [POWERPC] Add initial iomega StorCenter board port.
Use cuImage bootwrapper until U-Boot port is completed.
Derived heavily from Linkstation port.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Wilcox <andy@protium.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:54:36 -06:00
Jon Loeliger
1d59483aec [POWERPC] Add _nmask_and_or_msr() declartion to asm-powerpc/system.h
Prevents miscellaneous users from declaring it locally.

Signed-off-by: Jon Loeliger <jdl@freecale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:54:30 -06:00
Olof Johansson
70e47528aa [POWERPC] holly.c: Remove unnecessary include of linux/ide.h
There's nothing in holly.c that needs linux/ide.h, just remove it from
the list of includes.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:17:51 +11:00
Jon Loeliger
5f867dc798 [POWERPC] Clean out asm/of_{platform, device}.h
Convert #include of asm/of_{platform, device}.h into
linux/of_{platform,device}.h for a few scattered platforms.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 14:44:30 +11:00
Mark A. Greer
0961dbfbb8 [POWERPC] prpmc2800: Enable L2 cache
Turn on the L2 cache on the prpmc2800 platform.

Signed-off-by: Mark A. Greer <mgreer@mvista.com
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-19 15:11:30 +11:00
Kumar Gala
c9438affcb [POWERPC] Use for_each_ matching routinues for pci PHBs
On the Freescale embedded (83xx, 85xx, 86xx) and a few of the discrete
bridges (mpc10x, tsi108) use the new for_each_compatible_node() or
for_each_node_by_type() to provide more exact matching when looking for
PHBs in the device tree.

With the previous code it was possible to match on pci bridges since
we were only matching on device_type.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:40 -05:00
Roy Zang
c4e05bc57d [POWERPC] bootwrapper: adds cuboot for MPC7448HPC2 platform
This patch adds cuboot support for MPC7448HPC2 platform.
The cuImage can be used with legacy u-boot without FDT support.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:50 -05:00
Arnd Bergmann
a35e370cfd [POWERPC] Move embedded6xx into multiplatform
The various embedded 6xx systems can easily coexist in one kernel
together with the other 6xx based systems, so there is no strict
reason to keep them separate.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 09:11:25 +10:00
Dale Farnsworth
9b41fcb0eb [POWERPC] Add Marvell mv64x60 udbg putc/getc functions
Commit 69331af, "Fixes and cleanups for earlyprintk aka boot console",
resulted in printk output prior to the initialization of the mpsc
console driver not being printed.  That commit causes the mpsc's
CON_PRINTBUFFER flag to be cleared since udbg should have printed
the previous output.

I guess we can no longer ignore udbg. :)

This patch provides udbg_putc() and udbg_getc() functions for the
Marvell mv64x60 chips. These functions are enabled if an mv64x60
port is to be used as the console as determined from the device tree.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:21 +10:00
Guennadi Liakhovetski
7f2862c345 [POWERPC] linkstation updates
1. Fix RTC type - it is a rs5c372a, not rs5c372b
2. Configure both UART interrupts edge-triggered
3. Add a license header to ls_uart.c
4. Check for running on linkstation in a late_initcall() function. Needed
   for multiplatform builds, even though linkstation doesn't support them
   yet
5. Remove unneeded #include from linkstation.c

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:51:27 -05:00
Kumar Gala
33d71d26ba [POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need
To build arch/powerpc without including asm-ppc/ we need these files
in asm-powerpc/

Moved some headers under arch/powerpc/platforms if they were only used by
platform or driver files and fixed up the source file includes to match
the new locations

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:43:29 -05:00
Kumar Gala
ed16c20da6 [POWERPC] Remove old includes from arch/ppc
Remove includes of files that existed in arch/ppc that we dont need in
arch/powerpc anymore.  The following includes were removed:

 <asm/amigappc.h>
 <asm/bootinfo.h>
 <asm/ppcboot.h>
 <asm/ppc_sys.h>
 <asm/residual.h>
 <asm/m8260_pci.h>

This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be
needed and thus removed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:39:35 -05:00
Gabriel C
33567a023e [POWERPC] Typo fixes interrrupt -> interrupt
This fixes some interrrupt -> interrupt typos.

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Jon Loeliger
2a4a9fbf26 [POWERPC] embedded6xx: Remove unnecessary loops_per_jiffy initialization code
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Kumar Gala
2e56ff206b [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
Make it so we do a runtime check to know if we need to write cfg_addr
as big or little endian.  This is needed if we want to allow 86xx support
to co-exist in the same kernel as other 6xx PPCs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:29:09 -05:00
Robert P. J. Day
f8eb77d6fb [POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-22 21:30:58 +10:00
Kumar Gala
dbf8471f52 [POWERPC] Merge ppc32 and ppc64 pcibios_alloc_controller() prototypes
Make the ppc32 pcibios_alloc_controller take a device node to match
the ppc64 prototypes and have it set arch_data.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:39 -05:00
Kumar Gala
7d52c7b0cd [POWERPC] Pass the pci_controller into pci_exclude_device
There are times that we need to know which controller we are on to decide
how to exclude devices properly.  We now pass the pci_controller that we
are going to use down to the pci_exclude_device function. This will
greatly simplify being able to exclude the PHBs in multiple controller
setups.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:57:22 -05:00
Arnd Bergmann
d3c7ffabf0 [POWERPC] disallow building powermac and tsi108 without PCI
The TSI108 code and the 32 bit powermac and chrp platforms
have dependency on PCI that is not easy or desirable to get rid
of.

The easiest fix is to always select CONFIG_PCI if one of those
platforms is enabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:57:00 -05:00
Arnd Bergmann
d665840867 [POWERPC] fix building without PCI
Some code looks can be configured to be built without
PCI support, but does not work properly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:56:53 -05:00
Arnd Bergmann
3dfaa762b5 [POWERPC] kill isa_{io,mem}_base definitions for !PCI
When CONFIG_PCI is disabled, the definitions for isa_io_base,
isa_mem_base and pci_dram_offset are entirely unused, but they
can result in link failure because they are defined in multiple
places.

The easiest fix is to just remove all these definitions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:56:43 -05:00
Arnd Bergmann
09b55f76c9 [POWERPC] rename add_bridge to avoid namespace clashes
Many platforms currently define their own add_bridge function, some
of them globally. This breaks some multiplatform configurations.
Prefixing each of these functions with the platform name avoids
this problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:56:23 -05:00
Mark A. Greer
b0e80206cc [POWERPC] Update holly to use new dts wrapping feature
The holly support currently has separate rules to wrap its device tree
with its zImage.  This can now be done automatically without the extra
rules so update holly support to use the automatic feature.

Signed-off-by: Mark A. Greer <mgreer@mista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-25 17:02:04 +10:00
Dale Farnsworth
fd4ba7e2b7 [POWERPC] Add arch/powerpc support for the Motorola PrPMC2800
This finally adds the PPC_PRPMC2800 Kconfig option, the board setup
code (the setup and reset functions) and the defconfig, to support the
Motorola PrPMC2800 platform.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:50 +10:00
Dale Farnsworth
06cce43cf0 [POWERPC] Check cache coherency of kernel vs firmware
check_cache_coherency() verifies that the cache coherency setting of
the kernel (CONFIG_NOT_COHERENT_CACHE) matches that left by the firmware,
as indicated by coherency-off device tree property.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:50 +10:00
Dale Farnsworth
e1a3107b06 [POWERPC] Add Marvell mv64x60 PCI bridge support
This patch adds PCI bridge support for the Marvell mv64x60 chip.
We also provide the ability to read/write the mv64x60 hotswap
register via sysfs if the hs_reg_valid property is set in the
device tree.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:50 +10:00
Dale Farnsworth
52d3aff903 [POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data
This patch creates platform_device entries for the Marvell mv64x60
MPSC (multi-protocol serial controller) ports, based on information
contained in the device tree.

This driver (like the other mv64x60 drivers) are unusual in that it
works on both the MIPS and PowerPC architectures.  Because of that,
the drivers do not support the normal PowerPC of_platform_bus_type.
They support platform_bus_type instead.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:49 +10:00
Josh Boyer
cb9e4d10c4 [POWERPC] Add support for 750CL Holly board
Add PowerPC 750 Holly/Hickory platform support

Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 11:54:20 +10:00
Josh Boyer
05ad6a9159 [POWERPC] Generalize tsi108 PCI setup
Generalize tsi108_setup_pci to take the config space physical address and
primary bus designator as a parameter.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 11:54:20 +10:00
Josh Boyer
08390db07a [POWERPC] Add tsi108_pci.h for common PCI functions
Add a header file for the common PCI routines used for the TSI bridge

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 11:54:20 +10:00
Zang Roy-r61911
6bfeccdc11 [POWERPC] kernel: Remove loops_per_jiffy code for 7448HPC2 platforms
Remove loops_per_jiffy early initialization code for 7448HPC2 platforms.
Since udelay no longer uses loops_per_jiffy it is not necessary to
initialize it early.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 16:42:16 +10:00
Stephen Rothwell
e2eb63927b [POWERPC] Rename get_property to of_get_property: arch/powerpc
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:19 +10:00
Olaf Hering
8545cd2011 [POWERPC] Remove unused inclusion of linux/ide.h
Remove unneeded inclusion of linux/ide.h
It does not compile with CONFIG_BLOCK=n.

Remove asm/ide.h from ksyms file, it gets included earlier via
linux/ide.h.

Compile tested with all defconfig files.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
Kumar Gala
fd42c71751 [POWERPC] Removed config options that we don't support in embedded6xx
When we started arch/powerpc we duplicated a number of config options from
arch/ppc for various platforms that are supported.  Now that we actually
support a few platforms, remove all the ones that haven't been moved over.
Additionally, this cleanup moved the 82xx/PQ2 options over into
arch/powerpc/platforms/82xx/Kconfig where they belong.  It also killed
GEN550 which doesn't exist in arch/powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-22 10:06:40 -05:00
Zang Roy-r61911
6406063899 [POWERPC] Remove fixed setting of ROOT_DEV for 7448HPC2 platforms
Remove fixed setting of ROOT_DEV for 7448HPC2 platforms.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09 15:03:26 +11:00
Segher Boessenkool
44d7631bdb [POWERPC] PowerPC: select default image for Linkstation
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: G. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09 15:03:23 +11:00
Guennadi Liakhovetski
8500adc79b [POWERPC] Update to linkstation / kurobox support
Linkstation systems capable of running mainline kernels use u-boot as a
bootloader, so, specifying a suitable kernel command is not a problem.
Don't guess. Also extend linkstation_defconfig to support the linkstation HS
model with a IT8212 IDE controller and kuroboxHD/HD-HLAN linkstation
models with a tulip ethernet chip. The latter also require a slightly
different .dts file, which is also included with this patch.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-09 11:41:18 -06:00
Adrian Bunk
c53653130f [POWERPC] Remove the broken Gemini support
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:58 +11:00
Robert P. J. Day
bef1f40261 kconfig: Standardize "depends" -> "depends on" in Kconfig files
Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12 20:04:19 +01:00
David Howells
6d5aefb8ea WorkQueue: Fix up arch-specific work items where possible
Fix up arch-specific work items where possible to use the new work_struct and
delayed_work structs.

Three places that enqueue bits of their stack and then return have been marked
with #error as this is not permitted.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 19:36:26 +00:00
Guennadi Liakhovetski
04d76b937b [POWERPC] Linkstation / kurobox support
Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo
Technology, should be also applicable to the PPC TeraStation family.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:42:08 +11:00
Grant Likely
d4150248fc [POWERPC] Put mpc52xx support file in platforms/52xx
platforms/embedded6xx is probably going away, and 52xx boards need
some extra support the 52xx interrupt controller and DMA engine
anyway.  It makes sense to group all the 52xx bits into a single path.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:37 +11:00
Zang Roy-r61911
5873c9bdb0 [POWERPC] Make pci_read_irq_line the default on mpc7448hpc2 board
The following patch adds a tsi108/9 pci interrupt controller host.
On mpc7448hpc2 board, pci_irq_fixup function is removed, which makes the
pci_read_irq_line be the default pci irq fixup.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:27 +11:00
Benjamin Herrenschmidt
f90bb153b1 [POWERPC] Make pci_read_irq_line the default
This patch reworks the way IRQs are fixed up on PCI for arch powerpc.

It makes pci_read_irq_line() called by default in the PCI code for
devices that are probed, and add an optional per-device fixup in
ppc_md for platforms that really need to correct what they obtain
from pci_read_irq_line().

It also removes ppc_md.irq_bus_setup which was only used by pSeries
and should not be needed anymore.

I've also removed the pSeries s7a workaround as it can't work with
the current interrupt code anyway. I'm trying to get one of these
machines working so I can test a proper fix for that problem.

I also haven't updated the old-style fixup code from 85xx_cds.c
because it's actually buggy :) It assigns pci_dev->irq hard coded
numbers which is no good with the new IRQ mapping code. It should
at least use irq_create_mapping(NULL, hard_coded_number); and possibly
also set_irq_type() to set them as level low.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 16:00:04 +11:00
Olaf Hering
35a84c2f56 [POWERPC] Fix up after irq changes
Remove struct pt_regs * from all handlers.
Also remove the regs argument from get_irq() functions.
Compile tested with arch/powerpc/config/* and
arch/ppc/configs/prep_defconfig

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-07 22:08:26 +10:00
Dave Jones
038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Paul Mackerras
aa43f77939 Merge branch 'merge' 2006-08-31 15:45:48 +10:00