Commit Graph

25 Commits

Author SHA1 Message Date
Roland Dreier
fd9cfdd11b IB/mthca: Semaphore to mutex conversions
Convert semaphores to mutexes in mthca.  Leave firmware command
interface poll_sem and event_sem as semaphores.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 16:45:11 -08:00
Michael S. Tsirkin
e3aa31c517 IB/mthca: Don't cancel commands on a signal
We have run into the following problem: if a task receives a signal
while in the process of e.g. destroying a resource (which could be
because the relevant file was closed) mthca could bail out from trying
to take a command interface semaphore without performing the
appropriate command to tell hardware that the resource is being
destroyed.

As a result we see messages like
 ib_mthca 0000:04:00.0: HW2SW_CQ failed (-4)

In this case, hardware could access the resource after the memory has
been freed, possibly causing memory corruption.

A simple solution is to replace down_interruptible() by down() in
command interface activation.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
[ It's also not safe to bail out on multicast table operations, since
  they may be invoked on the cleanup path too.  So use down() for
  mcg_table.sem too. ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 16:22:29 -08:00
Michael S. Tsirkin
c063a06835 IB/mthca: Cosmetic: use the ALIGN macro
Use the ALIGN macro to simplify some rounding code.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12 15:43:58 -08:00
Ishai Rabinovitz
59f174faff IB/mthca: Fix memory leak of multicast group structures
Convert "/ (1 << lg)" to ">> lg" for a slight code size reduction.

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24)
function                                     old     new   delta
mthca_map_cmd                                613     589     -24

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12 15:24:51 -08:00
Jack Morgenstein
a3c8ab4fe8 IB/mthca: fix QP size limits for mem-free HCAs
Unlike tavor, the max work queue size is an exact power of 2 for arbel
mode, despite what the documentation (of the QUERY_DEV_LIM firmware
command) says.  Without this patch, on Arbel, we can start with a QP
of a valid size and get above the reported limit after rounding to the
next power of two.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-30 09:55:22 -08:00
Jack Morgenstein
77369ed31d [IB] uverbs: have kernel return QP capabilities
Move the computation of QP capabilities (max scatter/gather entries,
max inline data, etc) into the kernel, and have the uverbs module
return the values as part of the create QP response.  This keeps
precise knowledge of device limits in the low-level kernel driver.

This requires an ABI bump, so while we're making changes, get rid of
the max_sge parameter for the modify SRQ command -- it's not used and
shouldn't be there.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10 10:22:50 -08:00
Roland Dreier
a4da0628ef Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2005-10-28 15:50:51 -07:00
Al Viro
87b750dc4b [PATCH] gfp_t: drivers/infiniband
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:50 -07:00
Roland Dreier
3d155f8cd0 [IB] mthca: first pass at catastrophic error reporting
Add some initial support for detecting and reporting catastrophic
errors reported by Mellanox HCAs.  We start a periodic timer which
polls the catastrophic error reporting buffer in device memory.  If an
error is detected, we dump the contents of the buffer for port-mortem
debugging, and report a fatal asynchronous error to higher levels.

In the future we can try to recover from these errors by resetting the
device, but this will require some work in higher-level code as well.
Let's get this in now, so that we at least get catastrophic errors
reported in logs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-27 11:03:38 -07:00
Jack Morgenstein
efaae8f71f [IB] mthca: Better limit checking and reporting
Check the sizes of CQs, QPs and SRQs when creating objects, and fail
instead of creating too-big queues.  Also return real limits instead
of just plausible-sounding values from mthca_query_device().

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:29 -07:00
Michael S. Tsirkin
44dd823b00 [IB] mthca: Fix off by one bug in mthca_map_cmd
The loop in mthca_map_cmd() would fill one entry past the end of the
mailbox buffer before calling the firmware command.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26 09:42:09 -07:00
Roland Dreier
a4d61e8480 [PATCH] IB: move include files to include/rdma
Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:38 -07:00
Roland Dreier
ec34a922d2 [PATCH] IB/mthca: Add SRQ implementation
Add mthca support for shared receive queues (SRQs),
including userspace SRQs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:37 -07:00
Roland Dreier
da6561c285 [PATCH] IB/mthca: Use correct port width capability value
When we call the INIT_IB firmware command to bring up a port, use
the actual port width capability returned by the QUERY_DEV_LIM
command instead of always trying to enable both 1X and 4X.  This
fixes breakage seen when the firmware is build to allow 4X only.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:36 -07:00
Michael S. Tsirkin
2e8b981c5d [PATCH] IB/mthca: add HCA board ID to sysfs info
Add support for reporting HCA board ID returned from QUERY_ADAPTER
firmware command through sysfs.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:35 -07:00
Sean Hefty
97f52eb438 [PATCH] IB: sparse endianness cleanup
Fix sparse warnings.  Use __be* where appropriate.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:35 -07:00
Roland Dreier
2a1d9b7f09 [PATCH] IB: Add copyright notices
Make some lawyers happy and add copyright notices for people who
forgot to include them when they actually touched the code.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:35 -07:00
Roland Dreier
ed878458ee [PATCH] IB/mthca: Align FW command mailboxes to 4K
Future versions of Mellanox HCA firmware will require command mailboxes to be
aligned to 4K.  Support this by using a pci_pool to allocate all mailboxes.
This has the added benefit of shrinking the source and text of mthca.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:46 -07:00
Roland Dreier
80fd823873 [PATCH] IB/mthca: Encapsulate command interface init
Encapsulate mthca command interface initialization/cleanup.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:46 -07:00
Roland Dreier
d10ddbf6d7 [PATCH] IB/mthca: encapsulate mem-free check into mthca_is_memfree()
Clean up mem-free mode support by introducing mthca_is_memfree() function,
which encapsulates the logic of deciding if a device is mem-free.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:32 -07:00
Roland Dreier
6bd6228eed [PATCH] IB/mthca: tweaks to mthca_cmd.c
Minor tweaks to firmware command handling: kill off an unused get of a value,
and add a little more info to debug output.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:31 -07:00
Michael S. Tsirkin
b8ca06f674 [PATCH] IB/mthca: add SYNC_TPT firmware command
Add code for SYNC_TPT firmware command, which will be used by FMR
implementation.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:28 -07:00
Roland Dreier
44ea66879d [PATCH] IB/mthca: fix MTT allocation in mem-free mode
Fix bug in MTT allocation in mem-free mode.

I misunderstood the MTT size value returned by the firmware -- it is really
the size of a single MTT entry, since mem-free mode does not segment the MTT
as the original firmware did.  This meant that our MTT addresses ended up
being off by a factor of 8.  This meant that our MTT allocations might
overlap, and so we could overwrite and corrupt earlier memory regions when
writing new MTT entries.

We fix this by always using our 64-byte MTT segment size.  This allows some
simplification of the code as well, since there's no reason to put the MTT
segment size in a variable -- we can always use our enum value directly.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:24 -07:00
Roland Dreier
8cf2daf3fe [PATCH] IB/mthca: fill in more device query fields
Implement more of the device_query method in mthca.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:14 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00