android_kernel_xiaomi_sdm845/drivers/usb
Marcin Slusarz 327d74f6b6 USB: emi26: fix oops on load
Fix oops introduced by commit ae93a55bf9
(emi26: use request_firmware()):

usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
emi26 - firmware loader 1-1:1.0: emi26_probe start
usb 1-1: firmware: requesting emi26/loader.fw
usb 1-1: firmware: requesting emi26/bitstream.fw
usb 1-1: firmware: requesting emi26/firmware.fw
usb 1-1: emi26_set_reset - 1
usb 1-1: emi26_set_reset - 0
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26]
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/firmware/1-1/loading
Modules linked in: emi26(+) ipv6 cpufreq_ondemand coretemp arc4 ecb iwl3945 irtty_sir sir_dev nsc_ircc ehci_hcd uhci_hcd mac80211 irda usbcore snd_hda_intel thinkpad_acpi rfkill hwmon led_class e1000e snd_pcm cfg80211 snd_timer crc_ccitt snd snd_page_alloc aes_generic

Pid: 5082, comm: modprobe Not tainted (2.6.28 #2) 17023QG
EIP: 0060:[<f80dc487>] EFLAGS: 00010206 CPU: 0
EIP is at emi26_probe+0x2f7/0x620 [emi26]
EAX: 0000015c EBX: 00000000 ECX: c1ffd9c0 EDX: 00000000
ESI: 0000015c EDI: f6bb215c EBP: f6bb0400 ESP: f00ebcfc
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 5082, ti=f00ea000 task=f5c7c700 task.ti=f00ea000)
Stack:
 0000015c 000000a5 f6a67cb8 f80dc7e0 c01c6262 fbef2986 f6bb2000 00008fe0
 0000015c f715f748 f715f740 f715f738 f715f748 f6a67c00 f80dd040 f80dcfc0
 f6bb0400 fbacb290 f6a67c94 fbae0160 c01c70bf 00000000 f6a67c1c 00000000
Call Trace:
 [<c01c6262>] sysfs_add_one+0x12/0x50
 [<fbacb290>] usb_probe_interface+0xa0/0x140 [usbcore]
 [<c01c70bf>] sysfs_create_link+0xf/0x20
 [<c02dead2>] driver_probe_device+0x82/0x180
 [<fbac9eeb>] usb_match_id+0x3b/0x50 [usbcore]
 [<c02dec4e>] __driver_attach+0x7e/0x80
 [<c02de27a>] bus_for_each_dev+0x3a/0x60
 [<c02de956>] driver_attach+0x16/0x20
 [<c02debd0>] __driver_attach+0x0/0x80
 [<c02de7b1>] bus_add_driver+0x1a1/0x220
 [<c02dee4d>] driver_register+0x4d/0x120
 [<c024e622>] idr_get_empty_slot+0xf2/0x290
 [<fbacab71>] usb_register_driver+0x81/0x100 [usbcore]
 [<f806c000>] emi26_init+0x0/0x14 [emi26]
 [<c0101126>] do_one_initcall+0x36/0x1b0
 [<c01c5e70>] sysfs_ilookup_test+0x0/0x10
 [<c0197a61>] ifind+0x31/0x90
 [<c01c6229>] __sysfs_add_one+0x59/0x80
 [<c01c64e4>] sysfs_addrm_finish+0x14/0x1c0
 [<c0175ca3>] __vunmap+0xa3/0xd0
 [<c014b854>] load_module+0x1544/0x1640
 [<c014b9d7>] sys_init_module+0x87/0x1b0
 [<c0187f41>] sys_read+0x41/0x70
 [<c01032a5>] sysenter_do_call+0x12/0x21
 [<c03d0000>] wait_for_common+0x40/0x110
Code: 66 c1 e8 08 66 09 d0 75 a5 31 d2 89 e8 e8 72 fc ff ff 85 c0 0f 88 9a 02 00 00 b8 fa 00 00 00 e8 30 46 05 c8 8b 74 24 28 8b 5e 04 <8b> 03 89 44 24 1c 0f c8 89 44 24 1c 0f b7 4b 04 c7 44 24 20 00
EIP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] SS:ESP 0068:f00ebcfc
---[ end trace 2eefa13825431230 ]---

After the last "package" of firmware data is sent to the device, we dereference
NULL pointer (on access to rec->addr). Fix it.

Reported--by: David Flatz <david@upcs.at>
Tested-by: David Flatz <david@upcs.at>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable <stable@kernel.org> [2.6.27, 2.6.28]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 10:00:13 -08:00
..
atm net: convert more to %pM 2008-10-27 17:47:26 -07:00
c67x00
class USB: Enhance usage of pm_message_t 2009-01-07 10:00:03 -08:00
core USB: fix minor nit in usbfs checking 2009-01-07 10:00:13 -08:00
gadget USB: Fix goku_udc usb speed handling 2009-01-07 10:00:13 -08:00
host USB: automatically enable wakeup for PCI host controllers 2009-01-07 10:00:12 -08:00
image USB: change interface to usb_lock_device_for_reset() 2009-01-07 09:59:52 -08:00
misc USB: emi26: fix oops on load 2009-01-07 10:00:13 -08:00
mon USB: Allow usbmon as a module even if usbcore is builtin 2009-01-07 09:59:54 -08:00
musb USB: musb: Kill some compiling warning in musb Blackfin part 2009-01-07 10:00:08 -08:00
otg USB: otg: twl4030 transceiver driver 2009-01-07 10:00:11 -08:00
serial USB: option: increase outgoing buffer size and number 2009-01-07 10:00:06 -08:00
storage USB: storage: set CAPACITY_HEURISTICS flag for bad vendors 2009-01-07 10:00:12 -08:00
wusbcore USB: wusb: annotate association types withe proper endianness 2009-01-07 09:59:51 -08:00
Kconfig USB: move isp1301_omap to drivers/usb/otg 2009-01-07 10:00:02 -08:00
Makefile wusb: add HWA host controller driver 2008-09-17 16:54:31 +01:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.