Commit Graph

65449 Commits

Author SHA1 Message Date
Trent Piepho
19453bc188 V4L/DVB (6068): cx88-alsa: Use pci_dev->revision
The revision is part of the pci_dev struct, so there is no need to read it in.

Stop storing the revision and latency in the chip struct, since they're never
used after being printed out when the driver loads.

linux/pci.h wasn't included.  It was getting picked up something else,
probably cx88.h, but this file uses struct pci_dev so it should include pci.h.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:06:00 -03:00
Trent Piepho
5a5b3b5d4f V4L/DVB (6067): cx88-alsa: Hardware doesn't support mono audio
channels_min should be 2, not 1.  The hardware only supports stereo.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:59 -03:00
Trent Piepho
59fd8f8d8e V4L/DVB (6066): cx88-alsa: Change order of interrupt enabling, fix spurious IRQs
Currently the driver turns on audio interrupts, then sets the audio interrupt
mask to select which interrupts to get.  One could received unwanted
interrupts since the mask is set _after_ interrupts have already been turned
on.  Change the order of the operations, and clear any audio interrupt status
bits that are already set for good measure.

Before changing the SRAM FIFO parameters, make sure the FIFO isn't being used.
This shouldn't happen with just the ALSA driver, as it should never try to
turn on FIFO/RISC/DMA while they are already on.  However, the V4L driver
needs to turn the audio FIFO on for analog audio output to work (undocumented
cx88 bug).  The FIFO parameters are in an inconsistent state while they are
updated, and this results in many FIFO sync error IRQs if the FIFO is in use
while it's in this inconsistent state.

Also create and use a bunch of symbolic constants for audio interrupt mask
bits.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:55 -03:00
Trent Piepho
5ba862b77e V4L/DVB (6065): cx88-alsa: Call core irq handler when needed
When an irq handled by the cx88 core driver (currently IR and errors) occurs
and the cx88-alsa irq handler is the first called, it will claim to have
handled the irq but it doesn't call cx88_core_irq() to handle it.

The means loading cx88-alsa can disable the IR remote.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:55 -03:00
Trent Piepho
8ddac9ee4b V4L/DVB (6064): cx88: Add symbolic names for the PCI interrupt bits
Used for the PCI_INTMSK and PCI_INT_STAT registers.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:54 -03:00
Hans Verkuil
7c03a4488b V4L/DVB (6061): ivtv: add VIDIOC_OVERLAY
Add VIDIOC_OVERLAY to enable/disable the OSD. Also add the OSD state to the
log status report.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:53 -03:00
Hans Verkuil
8beb058f1e V4L/DVB (6060): ivtv: fix IVTV_IOC_DMA_FRAME bug introduced by highmem bugfix
The return value of ivtv_udma_fill_sg_list() was changed by the
highmem bugfix, but that return value was still used in ivtv-yuv.c.

Revert to the old return value, but in addition return -1 in case of
a memory allocation error.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:48 -03:00
Hans Verkuil
25e3f8f40e V4L/DVB (6059): ivtv: log stereo/bilingual audio modes
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:47 -03:00
Hans Verkuil
0989fd2c88 V4L/DVB (6058): ivtv: add support for highmem udma
When trying to DMA userspace buffers to the cx23415 you need to check
whether the page is in highmem. If this is the case, then bounce buffers
have to be used to allow DMA.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:46 -03:00
Hans Verkuil
3869c6a088 V4L/DVB (6057): ivtv-fb: remove unused header includes
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:46 -03:00
Hans Verkuil
baa4072d84 V4L/DVB (6056): ivtv: move serialization to the fileops level
Serialization is now done on the open/close/ioctl level and also when the
read/write/poll start an encoder/decoder stream.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:43 -03:00
Hans Verkuil
1aa32c2ffd V4L/DVB (6055): ivtv: improve debug messages
- add FILE debug flag for open/close/read/write/poll.
- show cmd for encoder/decoder command ioctl.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:42 -03:00
Hans Verkuil
313e91e824 V4L/DVB (6054): ivtv: specify some stream sizes in kB instead of MB
Some streams (PCM, VBI decoding) do not need that much memory, so specify
the allocated memory in kB instead of MB to limit memory usage. E.g. 1 MB
is overkill for the VBI decoding stream, 64 kB is enough.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:41 -03:00
Hans Verkuil
2ce55b606b V4L/DVB (6053): ivtv: setup TV output standard on init to prevent flicker
The TV output standard was set only on first use, which meant that the saa7127
was set to NTSC until then, leading to flickering on PAL systems.

Since the saa7127 has no firmware it is OK to initialize it immediately.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:40 -03:00
Hans Verkuil
8267761881 V4L/DVB (6051): cx25840: make proper use of SOFT_RESET
Whenever the 0x80b register is used the microcontroller should be reset.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:38 -03:00
Hans Verkuil
e17a06bada V4L/DVB (6050): ivtv: retry/timer improvements
- Give up frame after three retries.
- When the last capture/decode ends, make sure to delete the dma_timer.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:37 -03:00
Hans Verkuil
51a99c0428 V4L/DVB (6049): ivtv: fix VBI reinsertion decoding
- Invalid VBI packets should result in an empty VBI frame, not
  in an zero-sized frame that causes the reader to incorrectly
  return a 0 (EOF) value.
- PIO completion should not reset the sg_pending_size field.
- The DMA offset detection code should be ignored for PIO transfers:
  it somehow messes up the data on the card and is not needed anyway
  for PIO.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:36 -03:00
Hans Verkuil
de870b52be V4L/DVB (6048): ivtv: fix stop stream locking
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:36 -03:00
Hans Verkuil
37093b1ea6 V4L/DVB (6047): ivtv: Fix scatter/gather DMA timeouts
It turns out that the cx23415/6 DMA engine cannot do scatter/gather DMA
reliably. Every so often depending on the phase of the moon and your
hardware configuration the cx2341x DMA engine simply chokes on it and
you have to reboot to get it working again.

This change replaced the scatter/gather DMA by single transfers at a time,
where the driver is now responsible for DMA-ing each buffer.

UDMA is still done using scatter/gather DMA, that will be fixed soon.

Many thanks to Mark Bryars <mark.bryars@etvinteractive.com> for discovering
the link between scatter/gather and the DMA timeouts.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:32 -03:00
Hans Verkuil
f4071b85ea V4L/DVB (6046): ivtv: always steal full frames if out of buffers.
When there are no more free buffers, then buffers are stolen from the
predma queue. Buffers should be stolen from the head of that queue (which
is where the most recently added buffers are) and all buffers belonging
to a frame should be stolen. Otherwise 'half-frames' would remain in the
queue, which leads to ugly playback and complete sync failure for YUV
buffers.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:32 -03:00
Hans Verkuil
3562c43be8 V4L/DVB (6045): ivtv: fix handling of INITIALIZE_INPUT fw call
The CX2341X_ENC_INITIALIZE_INPUT firmware call requires careful handling,
otherwise the computer can freeze or the top-third of the screen can start
flickering. This patch ensures that CX2341X_ENC_INITIALIZE_INPUT is called
at the right time and in the right way.

In addition the stop capture handling was improved so that the last pending
DMA transfer is also processed. Otherwise this would be the first data that
arrived when a new capture was started which is not what you want.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:31 -03:00
Kazuhiko Kawakami
da80be2136 V4L/DVB (6044): vp27smpx: clarify history of this source.
Signed-off-by: Kazuhiko Kawakami <kazz-0@mail.goo.ne.jp>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:30 -03:00
Hans Verkuil
33bc4dea0e V4L/DVB (6043): ivtv: fix incorrect round-robin implementation
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:27 -03:00
Darren Salt
b1139e353c V4L/DVB (6040): Add IR support for Nova-T Stick
Working with Nova-T Stick (70001) with remote control model A415.
Untested with other dib0700m/dib0700p devices.

Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:26 -03:00
Darren Salt
faebb91439 V4L/DVB (6039): Typo fix in Nova-TD description
Typo fix in Nova-TD description

Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:26 -03:00
Michael Mauch
e927b3fa59 V4L/DVB (6038): Trivial: repair mixed parm descs in dvb-usb-init.c
Repair modinfo parameter descriptions for force_pid_filter_usage and
disable_rc_polling.

Signed-off-by: Michael Mauch <michael.mauch@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:25 -03:00
Alan Nisota
458b634cd8 V4L/DVB (6037): Updated GenPix USB driver
There are now 4 different versions of the GENPIX USB adapter.  The 
newest 'Skywalker' models are fully self-contained, and need no 
additional hardware to be used.  A very reliable DVB-S card even without 
using any of the alternate modulatations (which this kernel module does 
not currently support)

The following patch adds support for all 4 versions of the genpix
adapter (www.genpix-electronics.com).

Signed-off-by: Alan Nisota alannisota@gmail.com
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:22 -03:00
Trent Piepho
fa40b2237a V4L/DVB (6034): cx88: Add parameter to control radio deemphasis time constant
FM radio transmission use a preemphasis/deemphasis scheme to reduce
high-frequency noise.  The cx88 audio decoder is supposedly set to no
deemphasis by the current driver.

However, the "no deemphasis" setting doesn't work.  On my chip, cx23883, it
produces the same result as the 75 us time constant.  Maybe the default
settings on the cx23881 are for 50 us?

Since the deemphasis time constant varies by country, allow setting it via a
module parameter.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:21 -03:00
Trent Piepho
82e67246cd V4L/DVB (6031): Fix for bug 7819: fixed hotplugging for dvbnet
The first part of dvb_net_close() is just a cut&paste from
dvb_generic_release(), so maybe it would be better to just call
dvb_generic_release() instead?

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Markus Rechberger <mrechberger@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:21 -03:00
Adrian Bunk
89d969a39d V4L/DVB (6025): Net_ule(): fix check-after-use
The Coverity checker spotted that we'd have already oops'ed if "dev"
was NULL.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:20 -03:00
Trent Piepho
5772f81326 V4L/DVB (6023): cx88: Clean up some ugly and inconsistent printk()s
Get rid of the "CORE" prefix from cx88 printks.  It was only used a few times,
and it makes it look like they're coming from the kernel core or something.

Fix the message, "TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe", by adding a
"cx88[0]" prefix to be consistent, and to keep people who grep their dmesg
output for cx88 from missing it.  Get rid of the addresses, which are always
wrong.  The addresses are always set to -1, but because it's an unsigned 8-bit
value, the left shift converts it to the nonsense address 0x1fe.

In the cx8802 driver, some cut and pasted code prefixed lines with "CORE
cx88[0]:", which has been changed to "cx88[0]/2:" like the other printks from
the cx8802 driver.

Also fix some ugly printks in the cx8802 driver that used __FUNCTION__ for
KERN_INFO and KERN_ERR messages.

The changed printks in cx88-mpeg.c also needed lots of whitespace and
80-column fixes.

A bunch of misc changes in cx88-dvb.c and cx88-video.c to add message levels
or a consistent "cx88[?]/2" or "cx88[?]/0" prefix.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:17 -03:00
Trent Piepho
bbc83597df V4L/DVB (6022): cx88: Move card core creation from cx88-core.c to cx88-cards.c
A lot of code in cx88-cards.c was only used by cx88-core.c when the core state
is first allocated and initialized.  Moving that task to cx88-cards makes the
driver simpler and the files more self contained.

- Module parameters tuner, radio, card, and latency move to cx88-cards.c
- cx88_boards is made static
- cx88_subids is made static and const
- cx88_bcount is eliminated
- cx88_idcount is eliminated
- cx88_card_list() is made static
- cx88_card_setup_pre_i2c() is made static
- cx88_card_setup() is made static
- cx88_pci_quirks() is moved from cx88-core to cx88-cards
  The function argument "char *name" is made const too
- get_ressources() is moved from cx88-core to cx88-cards, and renamed to
  cx88_get_resources()
- The code to allocate and initialize the core state struct and the chip is
  moved out of cx88-core.c:cx88_get_core() and into a new function in
  cx88-cards.c, cx88_core_create().  This makes both functions simpler.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:16 -03:00
Trent Piepho
6a59d64c5c V4L/DVB (6021): cx88: Copy board information into card state
The cx88 driver state stored the ID of the board type in core->board.  Every
time the driver need to get some information about the board configuration, it
uses the board number as an index into board configuration array.

This patch changes it so that the board number is in core->boardnr, and
core->board is a copy of the board configuration information.  This allows
access to board information without the extra indirection.  e.g.
cx88_boards[core->board].mpeg becomes core->board.mpeg.

This has a number of advantages:
- The code is simpler to write.

- It compiles to be smaller and faster, without needing the extra array lookup
  to get at the board information.

- The cx88_boards array no longer needs to be exported to all cx88 modules.

- The boards array can be made const

- It should be possible to avoid keeping the (large) cx88_boards array around
  after the module is loaded.

- If module parameters or eeprom info override some board configuration
  setting, it's not necessary to modify the boards array, which would
  affect all boards of the same type.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:16 -03:00
Trent Piepho
b09a79f584 V4L/DVB (6020): cx88: Fix use of uninitialized variable
An error message for PCI resource allocation failure used the board type
before it was set.  Just get rid of the error message, as get_ressources()
[sic] already prints one.  Format that error message better, and add the pci
function and subsystem information to better associate the error with what
caused it.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:15 -03:00
Trent Piepho
c252b05115 V4L/DVB (6019): cx88: Make card database more memory efficient
The vmux setting is only two bits, but was taking up a whole 32 
in the input description struct.  By changing it to a two-bit 
bitfield, it can fit in what was padding space before and drop 
the input size by 4 bytes, from 28 to 24. This drops the board 
description struct, which has 9 inputs, from 280 to 244 bytes.  
Total driver size decreases by 2108 bytes.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:12 -03:00
Kay Sievers
5f553388b0 V4L/DVB (6015): DVB: convert struct class_device to struct device
The currently used "struct class_device" will be removed from the
kernel. Here is a trivial patch that converts DVB to use struct device.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:11 -03:00
Mauro Carvalho Chehab
acb09af4e3 V4L/DVB (6014): vivi: use videobuf_read_stream()
videobuf_read_stream is more efficient than videobuf_read_one

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:10 -03:00
Kumar Gala
e9f668dd12 V4L/DVB (6010): Use inline functions instead of inline asm for powerpc
Change io_st_le32() to use inline functions rather than
direct inline assembly code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:07 -03:00
Adrian Bunk
fbd8af0706 V4L/DVB (6009): Bt8xx: "extern inline" -> "static inline"
"extern inline" will have different semantics with gcc 4.3.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:05 -03:00
Michael Krufky
6b1dde90de V4L/DVB (6006): tuner: move last_div to tuner-simple private data
tuner-simple is the only sub-driver that uses last_div, so we 
can free up two bytes of memory for all other tuners, by moving 
this into tuner-simple's private data area.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:01 -03:00
Rolf Eike Beer
afa76b392e V4L/DVB (6005): Initialize filp->private_data only once in em28xx_v4l2_open
Some lines later filp->private_data is initialized to dev again.
Since there are some checks that might fail in the mean time
keep the later version.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:00 -03:00
Hans Verkuil
be848fe39a V4L/DVB (6003): vp27smpx: correctly attribute the origin of the driver
Correctly attribute the origin of the driver to Kazuhiko 
Kawakami.

It took some time to get the S-O-B line from the original 
tvaudio patch author, but here it is.

Signed-off-by: Kazuhiko Kawakami <kazz-0@mail.goo.ne.jp>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:00 -03:00
Hans Verkuil
6af5a0394a V4L/DVB (6002): ivtv: remove unused struct field.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:04:59 -03:00
Hans Verkuil
39c4ad6ab3 V4L/DVB (5999): cx25840: add radio support.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:04:56 -03:00
Hans Verkuil
9085009683 V4L/DVB (5998): ivtv: no need to mute the audio input
When changing channels the audio has to be muted. This is done 
by calling CX2341X_ENC_MUTE_AUDIO and by muted the audio input. 
The latter is not necessary and is now removed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:04:56 -03:00
Hans Verkuil
87410dab12 V4L/DVB (5997): cx25840: fix audio mute handling and reporting
Audio muting for the tuner input was implemented by stopping the 
audio microcontroller and restarting it on unmute. However, it 
appears that this method can actually crash the audio firmware. 
It's rare and seems to happen with NTSC only.

It has been reimplemented by setting to volume to 0. In addition, the
reporting of the mute state has been improved as well: it used to be
impossible to detect whether the audio was muted by the user or if it
was muted due to the microcontroller trying to detect the audio
standard. This is now clearly stated.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:04:55 -03:00
Hans Verkuil
372978055d V4L/DVB (5995): ivtv: add AverMedia M116
- Split Club3D card from Yuan PG600-2, GotView PCI DVD Lite
  (different composite input)
- Add AVerTV MCE 116 Plus (M116) card
- Allow Xceive cards to be used without Xceive support

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:04:54 -03:00
Hans Verkuil
2cc720957a V4L/DVB (5994): ivtv: make VIDIOC_INT_RESET support smarter.
Add support to optionally reset the IR and/or the video digitizer.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:04:51 -03:00
Hans Verkuil
89fc4eb924 V4L/DVB (5993): cx25840: resetting also requires reloading the firmware
Resetting without reloading the firmware is not enough. Sometimes the
firmware is 'stuck' and needs to be reloaded.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:04:50 -03:00
Hans Verkuil
94104aa2a8 V4L/DVB (5992): ivtv: show card name as well in the LOG_STATUS output.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:04:49 -03:00