Commit Graph

25 Commits

Author SHA1 Message Date
Kumar Gala
28eac2b74c powerpc/fsl: Remove cell-index from PCI nodes
The cell-index property isn't used on PCI nodes and is ill defined.
Remove it for now and if someone comes up with a good reason and
consistent definition for it we can add it back

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:14 -05:00
Anton Vorontsov
70b3adbba0 powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:04 -05:00
Linus Torvalds
3c92ec8ae9 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
  powerpc/44x: Support 16K/64K base page sizes on 44x
  powerpc: Force memory size to be a multiple of PAGE_SIZE
  powerpc/32: Wire up the trampoline code for kdump
  powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
  powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
  powerpc/32: Setup OF properties for kdump
  powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
  powerpc: Prepare xmon_save_regs for use with kdump
  powerpc: Remove default kexec/crash_kernel ops assignments
  powerpc: Make default kexec/crash_kernel ops implicit
  powerpc: Setup OF properties for ppc32 kexec
  powerpc/pseries: Fix cpu hotplug
  powerpc: Fix KVM build on ppc440
  powerpc/cell: add QPACE as a separate Cell platform
  powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
  powerpc/mpc5200: fix error paths in PSC UART probe function
  powerpc/mpc5200: add rts/cts handling in PSC UART driver
  powerpc/mpc5200: Make PSC UART driver update serial errors counters
  powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
  powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
  ...

Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-28 16:54:33 -08:00
Andy Fleming
b31a1d8b41 gianfar: Convert gianfar to an of_platform_driver
Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method.  The old way used fields in einfo, which no longer
exists.  The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:29:15 -08:00
Anton Vorontsov
691de57679 powerpc: Remove device_type = "rtc" properties in .dts files
We don't want to encourage the device_type usage.  It isn't used in
the code, so we can simply remove it from the dts files.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-05 22:08:28 +11:00
Anton Vorontsov
672e806ee1 powerpc/83xx: Add DS1339 RTC support for MPC8349E-mITX boards .dts
The RTC is sitting on the I2C2 bus at address 0x68. RTC interrupt signal
is connected to the IPIC's EXT2 interrupt line, the line is shared with
Vitesse 8201 Ethernet PHY.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-20 23:37:32 -05:00
John Rigby
5b70a09705 powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge.
Modify mpc83xx_add_bridge to get config space register base address from
the device tree instead of immr + hardcoded offset.

83xx pci nodes have this change:
    register properties now contain two address length tuples:
	First is the pci bridge register base, this has always been there.
	Second is the config base, this is new.

This is documented in dts-bindings/fsl/83xx-512x-pci.txt

The changes accomplish these things:
    mpc83xx_add_bridge no longer needs to call get_immrbase
    it uses hard coded addresses if the second register value is missing

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
Kumar Gala
aeb42762b8 powerpc/83xx: Add missing cell-index to dma-channel device nodes
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23 22:05:10 -05:00
Kim Phillips
cf0d19fb30 powerpc/fsl: proliferate simple-bus compatibility to soc nodes
add simple-bus compatible property to soc nodes for 83xx/85xx platforms
that were missing them.  Add same to platform probe code.

This fixes SoC device drivers (such as talitos) to succeed in matching
devices present in the soc node.

also update mpc836x_rdk dts to new SEC bindings (overlooked in commit
3fd4473: powerpc/fsl: update crypto node definition and device tree
instances).

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-29 17:48:35 -05:00
Kim Phillips
3fd44736db powerpc/fsl: update crypto node definition and device tree instances
delete obsolete device-type property, delete model property
(use compatible property instead), prepend "fsl," to Freescale
specific properties. Add nodes to device trees that are missing them,
and fix broken property values in other trees.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14 07:55:47 -05:00
Kumar Gala
dee805532a powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
Added DMA nodes for the elo/elo-plus DMA engines.

Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that
its the same as all the other boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-27 16:04:29 -05:00
Paul Gortmaker
cda13dd164 [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.

The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e.  the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.

The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.

I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 16:16:38 -06:00
Anton Vorontsov
f3a2b29d93 [POWERPC] fsl_spi: stop using device_type = "spi"
Also:
- rename "fsl_spi" to "fsl,spi";
- add and use cell-index property, if found;
- split probing code out of fsl_spi_init, thus we can call
  it for legacy device_type probing and new "compatible" probing.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:32:58 -06:00
Li Yang
866b6ddd28 [POWERPC] 83xx: USB device tree cleanups
Remove device_type = "usb" for 83xx SoC USB controller

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:33:05 -06:00
Kumar Gala
ea082fa94e [POWERPC] FSL: Added aliases node to device trees
Added aliases nodes for kurobox, 83xx, 85xx, and 86xx platforms.
This included added labels and cell-index properties for serial and
pci nodes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-12 01:51:03 -06:00
Kumar Gala
e77b28eb19 [POWERPC] FSL: enet device tree cleanups
* Removed address fields in ethernet nodes
* Removed #address-cells, #size-cells from gianfar nodes
* Added cell-index to gianfar and ucc ethernet nodes
* Added enet[0..3] labels
* Renamed compatible node for gianfar mdio to "fsl,gianfar-mdio"
* Removed device_type = "mdio"

The matching for gianfar mdio still supports the old "mdio"/"gianfar" combo
but it is now considered deprecated.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-12 01:50:45 -06:00
Kumar Gala
ec9686c4a5 [POWERPC] FSL: I2C device tree cleanups
* Removed device_type = "i2c"
* Added missing second I2C controller on MPC8548 CDS, MPC8544 DS
* Added #address-cells, #size-cells, and cell-index where missing

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 23:17:24 -06:00
Peter Korsgaard
33799e3379 [POWERPC] spi: Use fsl_spi instead of mpc83xx_spi
According to booting-without-of.txt, compatible should be "fsl_spi" and
mode "cpu" or "qe" for the fsl SPI controllers.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:17 -05:00
Grant Likely
ad25a4cca7 [POWERPC] mpc8349: Add linux,network-index to ethernet nodes in device tree
cuImage needs to know the logical index of the ethernet devices in order
to assign mac addresses.  This adds the needed properties.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
CC: Scott Wood <scottwood@freescale.com>
CC: Kumar Gala <galak@kernel.crashing.org>
CC: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:22 +10:00
Kumar Gala
1b3c5cdab4 [POWERPC] Move PCI nodes to be sibilings with SOC nodes
Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:22 -05:00
Kumar Gala
f0c8ac8083 [POWERPC] DTS cleanup
Removed the following cruft from .dts files:
* 32-bit in cpu node -- doesn't exist in any spec and not used by kernel
* removed built-in (chrp legacy)
* Removed #interrupt-cells in places they don't need to be set
* Fixed ranges on lite5200*
* Removed clock-frequency from i8259 pic node, not sure where this came from
* Removed big-endian from i8259 pic nodes, this was just bogus

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:16 -05:00
Roy Zang
344ffde71e [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree
Updated the 83xx & 85xx device tree PCI related compartible property.

Used the following compatible properties:
	PCI     "fsl,mpc8349-pci"
	PCI     "fsl,mpc8540-pci"
	PCI-X:  "fsl,mpc8540-pcix"
	PCIe:   "fsl,mpc8548-pcie"

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:08 -05:00
Stuart Yoder
500798d48f [POWERPC] Remove unused, undocumented #cpus property from cpus node
The #cpus property is unused and undocumented and is therefore
being removed.

Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09 15:03:24 +11:00
Kumar Gala
d71a1dc62b [POWERPC] 83xx: Cleaned up 83xx platform dts files
* Fixed up top level compatible property for all boards
* Removed explicit linux,phandle usage. Use references and labels now
* Fixed interrupt sense attribute, some interrupts were marked edge, that are level

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-16 10:10:52 -06:00
Timur Tabi
8c4a013da8 [POWERPC] 83xx: Add support for MPC8349E-mITX-GP
This patch adds a defconfig and a DTS for the MPC8349E-mITX-GP, a variant of
the MPC8349E-mITX.

USB is disabled because the only USB port is not setup properly by
firmware/kernel

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-13 12:48:56 -06:00