Commit Graph

211179 Commits

Author SHA1 Message Date
Eric Sandeen
72f84e6560 ext4: update writeback_index based on last page scanned
As pointed out in a prior patch, updating the mapping's
writeback_index based on pages written isn't quite right;
what the writeback index is really supposed to reflect is
the next page which should be scanned for writeback during
periodic flush.

As in write_cache_pages(), write_cache_pages_da() does
this scanning for us as we assemble the mpd for later
writeout.  If we keep track of the next page after the
current scan, we can easily update writeback_index without
worrying about pages written vs. pages skipped, etc.

Without this, an fsync will reset writeback_index to
0 (its starting index) + however many pages it wrote, which
can mess up the progress of periodic flush.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:13 -04:00
Eric Sandeen
5b41d92437 ext4: implement writeback livelock avoidance using page tagging
This is analogous to Jan Kara's commit,
f446daaea9
mm: implement writeback livelock avoidance using page tagging

but since we forked write_cache_pages, we need to reimplement
it there (and in ext4_da_writepages, since range_cyclic handling
was moved to there)

If you start a large buffered IO to a file, and then set
fsync after it, you'll find that fsync does not complete
until the other IO stops.

If you continue re-dirtying the file (say, putting dd
with conv=notrunc in a loop), when fsync finally completes
(after all IO is done), it reports via tracing that
it has written many more pages than the file contains;
in other words it has synced and re-synced pages in
the file multiple times.

This then leads to problems with our writeback_index
update, since it advances it by pages written, and
essentially sets writeback_index off the end of the
file...

With the following patch, we only sync as much as was
dirty at the time of the sync.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:13 -04:00
Eric Sandeen
bbd08344e3 ext4: tidy up a void argument in inode.c
This doesn't fix anything at all, it just removes a vestige
of prior use from __mpage_da_writepage()

__mpage_da_writepage() had a *void argument leftover from
its previous life as a callback; make it reflect the actual type.

Fixing this up makes it slightly more obvious to read, and 
enables proper typechecking.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:12 -04:00
Lukas Czerner
27ee40df2b ext4: add batched_discard into ext4 feature list
Should be applied on the top of "lazy inode table initialization"
and "batched discard support" patch-sets.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:12 -04:00
Lukas Czerner
7360d1731e ext4: Add batched discard support for ext4
Walk through allocation groups and trim all free extents. It can be
invoked through FITRIM ioctl on the file system. The main idea is to
provide a way to trim the whole file system if needed, since some SSD's
may suffer from performance loss after the whole device was filled (it
does not mean that fs is full!).

It search for free extents in allocation groups specified by Byte range
start -> start+len. When the free extent is within this range, blocks
are marked as used and then trimmed. Afterwards these blocks are marked
as free in per-group bitmap.

Since fstrim is a long operation it is good to have an ability to
interrupt it by a signal. This was added by Dmitry Monakhov.
Thanks Dimitry.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:12 -04:00
Lukas Czerner
367a51a339 fs: Add FITRIM ioctl
Adds an filesystem independent ioctl to allow implementation of file
system batched discard support. I takes fstrim_range structure as an
argument. fstrim_range is definec in the include/fs.h and its
definition is as follows.

struct fstrim_range {
	start;
	len;
	minlen;
}

start	- first Byte to trim
len	- number of Bytes to trim from start
minlen	- minimum extent length to trim, free extents shorter than this
	  number of Bytes will be ignored. This will be rounded up to fs
	  block size.

It is also possible to specify NULL as an argument. In this case the
arguments will set itself as follows:

start = 0;
len = ULLONG_MAX;
minlen = 0;

So it will trim the whole file system at one run.

After the FITRIM is done, the number of actually discarded Bytes is stored
in fstrim_range.len to give the user better insight on how much storage
space has been really released for wear-leveling.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:11 -04:00
Lukas Czerner
77ca6cdf0a ext4: Use return value from sb_issue_discard()
Use return value from sb_issue_discard() as return value in
ext4_issue_discard(). Since sb_issue_discard() may result in more
serious errors than just -EOPNOTSUPP it is worth to inform user of this
function about them to handle error cases properly.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:11 -04:00
Namhyung Kim
877836905d ext4: Check return value of sb_getblk() and friends
Fail block allocation if sb_getblk() returns NULL. In that case,
sb_find_get_block() also likely to fail so that it should skip
calling ext4_forget().

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:11 -04:00
Theodore Ts'o
bd2d0210cf ext4: use bio layer instead of buffer layer in mpage_da_submit_io
Call the block I/O layer directly instad of going through the buffer
layer.  This should give us much better performance and scalability,
as well as lowering our CPU utilization when doing buffered writeback.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:10 -04:00
Theodore Ts'o
1de3e3df91 ext4: move mpage_put_bnr_to_bhs()'s functionality to mpage_da_submit_io()
This massively simplifies the ext4_da_writepages() code path by
completely removing mpage_put_bnr_bhs(), which is almost 100 lines of
code iterating over a set of pages using pagevec_lookup(), and folds
that functionality into mpage_da_submit_io()'s existing
pagevec_lookup() loop.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:10 -04:00
Theodore Ts'o
3ecdb3a193 ext4: inline walk_page_buffers() into mpage_da_submit_io
Expand the call:

  if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
                        ext4_bh_delay_or_unwritten))
	goto redirty_page

into mpage_da_submit_io().

This will allow us to merge in mpage_put_bnr_to_bhs() in the next
patch.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:10 -04:00
Theodore Ts'o
cb20d51883 ext4: inline ext4_writepage() into mpage_da_submit_io()
As a prepratory step to switching to bio_submit, inline
ext4_writepage() into mpage_da_submit() and then simplify things a
bit.  This makes it clearer what mpage_da_submit needs to do.

Also, move the ClearPageChecked(page) call into
__ext4_journalled_writepage(), as a minor bit of cleanup refactoring.

This also allows us to pull i_size_read() and
ext4_should_journal_data() out of the loop, which should be a very
minor CPU savings.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:09 -04:00
Theodore Ts'o
a42afc5f56 ext4: simplify ext4_writepage()
The actual code in ext4_writepage() is unnecessarily convoluted.
Simplify it so it is easier to understand, but otherwise logically
equivalent.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:09 -04:00
Theodore Ts'o
5a87b7a5da ext4: call mpage_da_submit_io() from mpage_da_map_blocks()
Eventually we need to completely reorganize the ext4 writepage
callpath, but for now, we simplify things a little by calling
mpage_da_submit_io() from mpage_da_map_blocks(), since all of the
places where we call mpage_da_map_blocks() it is followed up by a call
to mpage_da_submit_io().

We're also a wee bit better with respect to error handling, but there
are still a number of issues where it's not clear what the right thing
is to do with ext4 functions deep in the writeback codepath fails.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:09 -04:00
Theodore Ts'o
16828088f9 ext4: use KMEM_CACHE instead of kmem_cache_create
Also remove the SLAB_RECLAIM_ACCOUNT flag from the system zone kmem
cache.  This slab tends to be fairly static, so it shouldn't be marked
as likely to have free pages that can be reclaimed.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:09 -04:00
Theodore Ts'o
7845c04975 ext4: use search_dirblock() in ext4_dx_find_entry()
Use the search_dirblock() in ext4_dx_find_entry().  It makes the code
easier to read, and it takes advantage of common code.  It also saves
100 bytes or so of text space.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
2010-10-27 21:30:08 -04:00
Theodore Ts'o
8941ec8bb6 ext4: avoid uninitialized memory references in ext3_htree_next_block()
If the first block of htree directory is missing '.' or '..' but is
otherwise a valid directory, and we do a lookup for '.' or '..', it's
possible to dereference an uninitialized memory pointer in
ext4_htree_next_block().

We avoid this by moving the special case from ext4_dx_find_entry() to
ext4_find_entry(); this also means we can optimize ext4_find_entry()
slightly when NFS looks up "..".

Thanks to Brad Spengler for pointing a Clang warning that led me to
look more closely at this code.  The warning was harmless, but it was
useful in pointing out code that was too ugly to live.  This warning was
also reported by Roman Borisov.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
2010-10-27 21:30:08 -04:00
Eric Sandeen
640e939656 ext4: remove unused ext4_sb_info members
Not that these take up a lot of room, but the structure is long enough
as it is, and there's no need to confuse people with these various
undocumented & unused structure members...

Signed-off-by: Eric Sandeen <sandeen@redaht.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:08 -04:00
Eric Sandeen
c999af2b34 ext4: queue conversion after adding to inode's completed IO list
By queuing the io end on the unwritten workqueue before adding it
to our inode's list of completed IOs, I think we run the risk
of the work getting completed, and the IO freed, before we try
to add it to the inode's i_completed_io_list.

It should be safe to add it to the inode's list of completed
IOs, and -then- queue it for completion, I think.

Thanks to Dave Chinner for pointing out the race.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:07 -04:00
Eric Sandeen
3e1e5f5016 ext4: don't use ext4_allocation_contexts for tracing
Many tracepoints were populating an ext4_allocation_context
to pass in, but this requires a slab allocation even when
tracepoints are off.  In fact, 4 of 5 of these allocations
were only for tracing.  In addition, we were only using a
small fraction of the 144 bytes of this structure for this
purpose.

We can do away with all these alloc/frees of the ac and
simply pass in the bits we care about, instead.

I tested this by turning on tracing and running through
xfstests on x86_64.  I did not actually do anything with
the trace output, however.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:07 -04:00
Eric Sandeen
4d5476164a ext4: fix oops in trace_ext4_mb_release_group_pa
Our QA reported an oops in the ext4_mb_release_group_pa tracing,
and Josef Bacik pointed out that it was because we may have a
non-null but uninitialized ac_inode in the allocation context.

I can reproduce it when running xfstests with ext4 tracepoints on, 
on a CONFIG_SLAB_DEBUG kernel.

We call trace_ext4_mb_release_group_pa from 2 places, 
ext4_mb_discard_group_preallocations and 
ext4_mb_discard_lg_preallocations

In both cases we allocate an ac as a container just for tracing (!)
and never fill in the ac_inode.  There's no reason to be assigning,
testing, or printing it as far as I can see, so just remove it from
the tracepoint.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:07 -04:00
Toshiyuki Okajima
0c9169ccad ext4: fix potential infinite loop in ext4_da_writepages()
On linux-2.6.36-rc2, if we execute the following script, we can hang
the system when the /bin/sync command is executed:

========================================================================
#!/bin/sh

echo -n "HANG UP TEST: "
/bin/dd if=/dev/zero of=/tmp/img bs=1k count=1 seek=1M 2> /dev/null
/sbin/mkfs.ext4 -Fq /tmp/img
/bin/mount -o loop -t ext4 /tmp/img /mnt
/bin/dd if=/dev/zero of=/mnt/file bs=1 count=1 \
seek=$((16*1024*1024*1024*1024-4096)) 2> /dev/null
/bin/sync
/bin/umount /mnt
echo "DONE"
exit 0
========================================================================

We can see the following backtrace if we get the kdump when this
hangup occurs:

======================================================================
kthread()
=> bdi_writeback_thread()
   => wb_do_writeback()
      => wb_writeback()
         => writeback_inodes_wb()
            => writeback_sb_inodes()
               => writeback_single_inode()
                  => ext4_da_writepages()  ---+ 
                                ^ infinite    |
                                |   loop      |
                                +-------------+
======================================================================

The reason why this hangup happens is described as follows:
1) We write the last extent block of the file whose size is the filesystem 
   maximum size.
2) "BH_Delay" flag is set on the buffer_head of its block.
3) - the member, "m_lblk" of struct mpage_da_data is 4294967295 (UINT_MAX)
   - the member, "m_len" of struct mpage_da_data is 1
  mpage_put_bnr_to_bhs() which is called via ext4_da_writepages()
  cannot clear "BH_Delay" flag of the buffer_head because the type of
  m_lblk is ext4_lblk_t and then m_lblk + m_len is overflow.

  Therefore an infinite loop occurs because ext4_da_writepages()
  cannot write the page (which corresponds to the block) since
  "BH_Delay" flag isn't cleared.
----------------------------------------------------------------------
static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd,
				struct ext4_map_blocks *map)
{
...
	int blocks = map->m_len;
...
		do {
			// cur_logical = 4294967295
			// map->m_lblk = 4294967295
			// blocks = 1
			// *** map->m_lblk + blocks == 0 (OVERFLOW!) ***
			// (cur_logical >= map->m_lblk + blocks) => true
			if (cur_logical >= map->m_lblk + blocks)
				break;
----------------------------------------------------------------------

NOTE: Mounting with the nodelalloc option will avoid this codepath,
and thus, avoid this hang

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:07 -04:00
Toshiyuki Okajima
e0d10bfa91 ext4: improve llseek error handling for overly large seek offsets
The llseek system call should return EINVAL if passed a seek offset
which results in a write error.  What this maximum offset should be
depends on whether or not the huge_file file system feature is set,
and whether or not the file is extent based or not.


If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be 
written (write systemcall) is different from the maximum size which can be 
sought (lseek systemcall).

For example, the following 2 cases demonstrates the differences
between the maximum size which can be written, versus the seek offset
allowed by the llseek system call:

#1: mkfs.ext3 <dev>; mount -t ext4 <dev>
#2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev>

Table. the max file size which we can write or seek
       at each filesystem feature tuning and file flag setting
+============+===============================+===============================+
| \ File flag|                               |                               |
|      \     |     !EXT4_EXTENTS_FL          |        EXT4_EXTETNS_FL        |
|case       \|                               |                               |
+------------+-------------------------------+-------------------------------+
| #1         |   write:      2194719883264   | write:       --------------   |
|            |   seek:       2199023251456   | seek:        --------------   |
+------------+-------------------------------+-------------------------------+
| #2         |   write:      4402345721856   | write:       17592186044415   |
|            |   seek:      17592186044415   | seek:        17592186044415   |
+------------+-------------------------------+-------------------------------+

The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes
(= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped 
maxbytes).  Although generic_file_llseek uses only extent-mapped maxbytes.
(llseek of ext4_file_operations is generic_file_llseek which uses
sb->s_maxbytes.)

Therefore we create ext4 llseek function which uses 2 maxbytes.

The new own function originates from generic_file_llseek().
If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters 
inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes.

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
2010-10-27 21:30:06 -04:00
Maciej Żenczykowski
c41303ced6 ext4: don't update sb journal_devnum when RO dev
An ext4 filesystem on a read-only device, with an external journal
which is at a different device number then recorded in the superblock
will fail to honor the read-only setting of the device and trigger
a superblock update (write).

For example:
  - ext4 on a software raid which is in read-only mode
  - external journal on a read-write device which has changed device num
  - attempt to mount with -o journal_dev=<new_number>
  - hits BUG_ON(mddev->ro = 1) in md.c

Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:06 -04:00
Lukas Czerner
2407518de6 ext4: use sb_issue_zeroout in ext4_ext_zeroout
Change ext4_ext_zeroout to use sb_issue_zeroout instead of its
own approach to zero out extents.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:06 -04:00
Lukas Czerner
a31437b85a ext4: use sb_issue_zeroout in setup_new_group_blocks
Use sb_issue_zeroout to zero out inode table and descriptor table
blocks instead of old approach which involves journaling.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:05 -04:00
Lukas Czerner
857ac889cc ext4: add interface to advertise ext4 features in sysfs
User-space should have the opportunity to check what features doest ext4
support in each particular copy. This adds easy interface by creating new
"features" directory in sys/fs/ext4/. In that directory files
advertising feature names can be created.

Add lazy_itable_init to the feature list.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:05 -04:00
Lukas Czerner
bfff68738f ext4: add support for lazy inode table initialization
When the lazy_itable_init extended option is passed to mke2fs, it
considerably speeds up filesystem creation because inode tables are
not zeroed out.  The fact that parts of the inode table are
uninitialized is not a problem so long as the block group descriptors,
which contain information regarding how much of the inode table has
been initialized, has not been corrupted However, if the block group
checksums are not valid, e2fsck must scan the entire inode table, and
the the old, uninitialized data could potentially cause e2fsck to
report false problems.

Hence, it is important for the inode tables to be initialized as soon
as possble.  This commit adds this feature so that mke2fs can safely
use the lazy inode table initialization feature to speed up formatting
file systems.

This is done via a new new kernel thread called ext4lazyinit, which is
created on demand and destroyed, when it is no longer needed.  There
is only one thread for all ext4 filesystems in the system. When the
first filesystem with inititable mount option is mounted, ext4lazyinit
thread is created, then the filesystem can register its request in the
request list.

This thread then walks through the list of requests picking up
scheduled requests and invoking ext4_init_inode_table(). Next schedule
time for the request is computed by multiplying the time it took to
zero out last inode table with wait multiplier, which can be set with
the (init_itable=n) mount option (default is 10).  We are doing
this so we do not take the whole I/O bandwidth. When the thread is no
longer necessary (request list is empty) it frees the appropriate
structures and exits (and can be created later later by another
filesystem).

We do not disturb regular inode allocations in any way, it just do not
care whether the inode table is, or is not zeroed. But when zeroing, we
have to skip used inodes, obviously. Also we should prevent new inode
allocations from the group, while zeroing is on the way. For that we
take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem
in the ext4_claim_inode, so when we are unlucky and allocator hits the
group which is currently being zeroed, it just has to wait.

This can be suppresed using the mount option no_init_itable.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:05 -04:00
Lukas Czerner
e6fa0be699 Add helper function for blkdev_issue_zeroout (sb_issue_discard)
This is done the same way as helper sb_issue_discard for
blkdev_issue_discard.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:04 -04:00
Theodore Ts'o
5c2178e785 jbd2: Add sanity check for attempts to start handle during umount
An attempt to modify the file system during the call to
jbd2_destroy_journal() can lead to a system lockup.  So add some
checking to make it much more obvious when this happens to and to
determine where the offending code is located.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:04 -04:00
Sergey Senozhatsky
a1c6c5698d ext4: fix NULL pointer dereference in print_daily_error_info()
Fix NULL pointer dereference in print_daily_error_info, when   
called on unmounted fs (EXT4_SB(sb) returns NULL), by removing error 
reporting timer in ext4_put_super.

Google-Bug-Id: 3017663

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:04 -04:00
Lukas Czerner
53fdcf992d ext4: don't hold spinlock while calling ext4_issue_discard()
We can't hold the block group spinlock because we ext4_issue_discard()
calls wait and hence can get rescheduled.

Google-Bug-Id: 3017678

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:04 -04:00
Lukas Czerner
5829870982 ext4: check for negative error code from sb_issue_discard
sb_issue_discard() is returning negative error code, so check for
-EOPNOTSUPP.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:03 -04:00
Eric Sandeen
b443e7339a ext4: don't bump up LONG_MAX nr_to_write by a factor of 8
I'm uneasy with lots of stuff going on in ext4_da_writepages(),
but bumping nr_to_write from LLONG_MAX to -8 clearly isn't
making anything better, so avoid the multiplier in that case.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:03 -04:00
Eric Sandeen
659c6009ca ext4: stop looping in ext4_num_dirty_pages when max_pages reached
Today we simply break out of the inner loop when we have accumulated
max_pages; this keeps scanning forwad and doing pagevec_lookup_tag()
in the while (!done) loop, this does potentially a lot of work
with no net effect.

When we have accumulated max_pages, just clean up and return.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:03 -04:00
Curt Wohlgemuth
fb1813f4a8 ext4: use dedicated slab caches for group_info structures
ext4_group_info structures are currently allocated with kmalloc().
With a typical 4K block size, these are 136 bytes each -- meaning
they'll each consume a 256-byte slab object.  On a system with many
ext4 large partitions, that's a lot of wasted kernel slab space.
(E.g., a single 1TB partition will have about 8000 block groups, using
about 2MB of slab, of which nearly 1MB is wasted.)

This patch creates an array of slab pointers created as needed --
depending on the superblock block size -- and uses these slabs to
allocate the group info objects.

Google-Bug-Id: 2980809

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:29:12 -04:00
Wen Congyang
b853fd3648 ext4: avoid null dereference in trace_ext4_mballoc_discard
ac->inode is set to null in function ext4_mb_release_group_pa(),
and then trace_ext4_mballoc_discard(ac) is called, the kernel
will panic.

BUG: unable to handle kernel NULL pointer dereference at 000000a4
IP: [<f87e1714>] ftrace_raw_event_ext4__mballoc+0x54/0xc0 [ext4]
*pdpt = 0000000000abd001 *pde = 0000000000000000
Oops: 0000 [#1] SMP

Pid: 550, comm: flush-8:16 Not tainted 2.6.36-rc1 #1 SE7320EP2/Altos G530
EIP: 0060:[<f87e1714>] EFLAGS: 00010206 CPU: 1
EIP is at ftrace_raw_event_ext4__mballoc+0x54/0xc0 [ext4]
EAX: f32ac840 EBX: f3f1cf88 ECX: f32ac840 EDX: 00000000
ESI: f32ac83c EDI: f880b9d8 EBP: 00000000 ESP: f4b77ae4
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process flush-8:16 (pid: 550, ti=f4b76000 task=f613e540 task.ti=f4b76000)
Call Trace:
 [<f87f5ac1>] ? ext4_mb_release_group_pa+0x121/0x150 [ext4]
 [<f87f8356>] ? ext4_mb_discard_group_preallocations+0x336/0x400 [ext4]
 [<f87fb7f1>] ? ext4_mb_new_blocks+0x3d1/0x4f0 [ext4]
 [<c05a6c5b>] ? __make_request+0x10b/0x440
 [<f87f1fb4>] ? ext4_ext_map_blocks+0x1334/0x1980 [ext4]
 [<c04ac78a>] ? rb_reserve_next_event+0xaa/0x3b0
 [<f87d18d6>] ? ext4_map_blocks+0xd6/0x1d0 [ext4]
 [<f87d2da7>] ? mpage_da_map_blocks+0xc7/0x8a0 [ext4]
 [<c04c8a68>] ? find_get_pages_tag+0x38/0x110
 [<c04d23a5>] ? __pagevec_release+0x15/0x20
 [<f87d3ca5>] ? ext4_da_writepages+0x2b5/0x5d0 [ext4]
 [<c04cfbe0>] ? __writepage+0x0/0x30
 [<c04d0e34>] ? do_writepages+0x14/0x30
 [<c0526600>] ? writeback_single_inode+0xa0/0x240
 [<c0526971>] ? writeback_sb_inodes+0xc1/0x180
 [<c0526ab8>] ? writeback_inodes_wb+0x88/0x140
 [<c0526d7b>] ? wb_writeback+0x20b/0x320
 [<c045aca7>] ? lock_timer_base+0x27/0x50
 [<c0526fe0>] ? wb_do_writeback+0x150/0x190
 [<c05270a8>] ? bdi_writeback_thread+0x88/0x1f0
 [<c043b680>] ? complete+0x40/0x60
 [<c0527020>] ? bdi_writeback_thread+0x0/0x1f0
 [<c0469474>] ? kthread+0x74/0x80
 [<c0469400>] ? kthread+0x0/0x80
 [<c040a23e>] ? kernel_thread_helper+0x6/0x10

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:27:12 -04:00
Brian King
39e3ac2599 jbd2: Fix I/O hang in jbd2_journal_release_jbd_inode
This fixes a hang seen in jbd2_journal_release_jbd_inode
on a lot of Power 6 systems running with ext4. When we get
in the hung state, all I/O to the disk in question gets blocked
where we stay indefinitely. Looking at the task list, I can see
we are stuck in jbd2_journal_release_jbd_inode waiting on a
wake up. I added some debug code to detect this scenario and
dump additional data if we were stuck in jbd2_journal_release_jbd_inode
for longer than 30 minutes. When it hit, I was able to see that
i_flags was 0, suggesting we missed the wake up.

This patch changes i_flags to be an unsigned long, uses bit operators
to access it, and adds barriers around the accesses. Prior to applying
this patch, we were regularly hitting this hang on numerous systems
in our test environment. After applying the patch, the hangs no longer
occur.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:25:12 -04:00
Theodore Ts'o
58590b06d7 ext4: fix EOFBLOCKS_FL handling
It turns out we have several problems with how EOFBLOCKS_FL is
handled.  First of all, there was a fencepost error where we were not
clearing the EOFBLOCKS_FL when fill in the last uninitialized block,
but rather when we allocate the next block _after_ the uninitalized
block.  Secondly we were not testing to see if we needed to clear the
EOFBLOCKS_FL when writing to the file O_DIRECT or when were converting
an uninitialized block (which is the most common case).

Google-Bug-Id: 2928259

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:23:12 -04:00
Linus Torvalds
899611ee7d Linux 2.6.36-rc6 2010-09-28 18:01:22 -07:00
David Howells
62bdb288bf MN10300: Handle missing sys_cacheflush() when caching disabled
When caching is disabled on the MN10300 arch, the sys_cacheflush()
function is removed by conditional stuff in the makefiles, but is still
referred to by the syscall table.

Provide a null version that just returns 0 when caching is disabled (or
-EINVAL if the arguments are silly).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-28 18:01:14 -07:00
Linus Torvalds
0f44fbd297 alpha: fix compile problem in arch/alpha/kernel/signal.c
Tssk.  Apparently Al hadn't checked commit c52c2ddc1d ("alpha: switch
osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile.

Fixed as per suggestions from Michael Cree.

Reported-by: Michael Cree <mcree@orcon.net.nz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-28 13:26:57 -07:00
Linus Torvalds
7268e3c4b5 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: fix module refcount breakage introduced by libahci split
2010-09-28 12:38:52 -07:00
Tejun Heo
fad16e7a7f ahci: fix module refcount breakage introduced by libahci split
libata depends on scsi_host_template for module reference counting and
sht's should be owned by each low level driver.  During libahci split,
the sht was left with libahci.ko leaving the actual low level drivers
not reference counted.  This made ahci and ahci_platform always
unloadable even while they're being actively used.

Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for
each low level ahci driver.

stable: only applicable to 2.6.35.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-28 15:14:51 -04:00
Linus Torvalds
b4d32648c1 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon (coretemp): Fix build breakage if SMP is undefined
2010-09-28 12:13:13 -07:00
Linus Torvalds
0d70397bc7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: fix pci_resource_alignment prototype
2010-09-28 12:02:22 -07:00
Linus Torvalds
a2724f28d9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  tcp: Fix >4GB writes on 64-bit.
  net/9p: Mount only matching virtio channels
  de2104x: fix ethtool
  tproxy: check for transparent flag in ip_route_newports
  ipv6: add IPv6 to neighbour table overflow warning
  tcp: fix TSO FACK loss marking in tcp_mark_head_lost
  3c59x: fix regression from patch "Add ethtool WOL support"
  ipv6: add a missing unregister_pernet_subsys call
  s390: use free_netdev(netdev) instead of kfree()
  sgiseeq: use free_netdev(netdev) instead of kfree()
  rionet: use free_netdev(netdev) instead of kfree()
  ibm_newemac: use free_netdev(netdev) instead of kfree()
  smsc911x: Add MODULE_ALIAS()
  net: reset skb queue mapping when rx'ing over tunnel
  br2684: fix scheduling while atomic
  de2104x: fix TP link detection
  de2104x: fix power management
  de2104x: disable autonegotiation on broken hardware
  net: fix a lockdep splat
  e1000e: 82579 do not gate auto config of PHY by hardware during nominal use
  ...
2010-09-28 12:01:26 -07:00
Guenter Roeck
fff2017354 hwmon (coretemp): Fix build breakage if SMP is undefined
Commit e40cc4bdfd introduced
a build breakage if CONFIG_SMP is undefined. This commit
fixes the problem.

This fix is only a workaround. For a real fix, cpu_sibling_mask() should
be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be
included directly. This fix is currently not possible because asm/smp.h defines
cpu_sibling_mask() unconditionally and is included directly from many source
files.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
2010-09-28 04:18:51 -07:00
Linus Torvalds
050026feae Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile
2010-09-27 21:19:27 -07:00
David S. Miller
01db403cf9 tcp: Fix >4GB writes on 64-bit.
Fixes kernel bugzilla #16603

tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write
zero bytes, for example.

There is also the problem higher up of how verify_iovec() works.  It
wants to prevent the total length from looking like an error return
value.

However it does this using 'int', but syscalls return 'long' (and
thus signed 64-bit on 64-bit machines).  So it could trigger
false-positives on 64-bit as written.  So fix it to use 'long'.

Reported-by: Olaf Bonorden <bono@onlinehome.de>
Reported-by: Daniel Büse <dbuese@gmx.de>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27 20:24:54 -07:00