Commit Graph

26858 Commits

Author SHA1 Message Date
Thomas Gleixner
7aa65bfd67 [MTD] NAND cleanup nand_scan
Seperate functionality out of nand_scan so the code is more
readable. No functional change. First step of simplifying
the nand driver.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:54:38 +02:00
Thomas Gleixner
58dd8f2bfd [MTD] NAND consolidate data types
The NAND driver used a mix of unsigned char, u_char amd uint8_t
data types. Consolidate to uint8_t usage

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:52:35 +02:00
Thomas Gleixner
2c0a2bed92 [MTD] NAND whitespace and formatting cleanup
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:50:56 +02:00
Thomas Gleixner
dcb0932884 [JFFS2] Simplify writebuffer handling
The writev based write buffer implementation was far to complex as
in most use cases the write buffer had to be handled anyway.
Simplify the write buffer handling and use mtd->write instead.

From extensive testing no performance impact has been noted.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:49:14 +02:00
Thomas Gleixner
ce4c61f184 [MTD] Add support for NDFC NAND controller
NDFC NAND Flash controller is embedded in PPC EP44x SoCs.
Add platform driver based support.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:43:28 +02:00
Thomas Gleixner
41796c2ea9 [MTD] Add platform support for NAND
Add the data structures necessary to provide platform device support
for NAND

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:38:59 +02:00
Thomas Gleixner
a36ed2995c [MTD] Simplify NAND locking
Replace the chip lock by a the controller lock. For simple drivers a
dummy controller structure is created by the scan code.
This simplifies the locking algorithm in nand_get/release_chip().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:37:03 +02:00
Thomas Gleixner
819d6a32c3 [MTD] Improve software ECC calculation
Unrolling the loops produces denser and much faster code.
Add a config switch which allows to select the byte order of the
resulting ecc code. The current Linux implementation has a byte
swap versus the SmartMedia specification

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:32:45 +02:00
David Woodhouse
a1b563d652 [JFFS2] Initialise ref->next_in_ino when marking dirty space in wbuf flush
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 13:55:46 +01:00
David Woodhouse
3b79673cfa [JFFS2] Fix accounting error in jffs2_link_node_ref()
When filing REF_OBSOLETE nodes, we'd add their size to the global
'dirty_size' count, but then to the eraseblock's 'used_size' count.
That's not clever.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 12:15:47 +01:00
David Woodhouse
06c6764b58 [JFFS2] Fix dummy jffs2_sum_scan_sumnode() macro for !SUMMARY case.
I added an argument to the real function...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 11:27:14 +01:00
David Woodhouse
0d25971d7c Merge git://git.infradead.org/jffs2-devel-2.6 2006-05-21 19:05:55 +01:00
David Woodhouse
615191bb1d [MTD] Account for MODULE_SYMBOL_PREFIX when requesting NOR chip driver
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 19:03:21 +01:00
David Woodhouse
ecde263130 [MTD] Use symbol_request() in old DiskOnChip probe code to find actual driver
The previous code wouldn't work correctly on architectures which have a
non-empty MODULE_SYMBOL_PREFIX, and this version is neater if slightly
less optimal in the built-in case.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 18:38:51 +01:00
Jonathan McDowell
3d12c0c75d [MTD] Add Amstrad Delta NAND support
The patch below adds support for the NAND device on the Amstrad Delta.
This is a 32MiB 8bit Toshiba device, with the data bus connected to the
OMAP MPUIO pins and ALE, CLE, NCE, NRE, NWE and NWP all connected to the
Delta's latch2 16bit latch.

Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 18:11:55 +01:00
David Woodhouse
ca89a517fa [JFFS2] Finally eliminate __totlen field from struct jffs2_raw_node_ref
Well, almost. We'll actually keep a 'TEST_TOTLEN' macro set for now, and keep
doing some paranoia checks to make sure it's all working correctly. But if
TEST_TOTLEN is unset, the size of struct jffs2_raw_node_ref drops from 16
bytes to 12 on 32-bit machines. That's a saving of about half a megabyte of
memory on the OLPC prototype board, with 125K or so nodes in its 512MiB of
flash.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 13:29:11 +01:00
David Woodhouse
010b06d6d0 [JFFS2] Locking issues in summary write code.
We can't use jffs2_scan_dirty_space() because it doesn't do any locking; it's
only for use at scan time -- hence the 'scan' in the name.

Also, don't allocate refs while we have c->erase_completion_lock held.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 13:15:59 +01:00
David Woodhouse
9167e0f811 [JFFS2] Remove stray kfree of summary info in XATTR code.
We don't allocate this locally any more -- it's given to us and owner by
our caller. Also improve the debug messages a little.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 13:13:45 +01:00
David Woodhouse
0bcc099d6d [JFFS2] File node reference for wasted space when flushing wbuf
Next step in ongoing campaign to file a struct jffs2_raw_node_ref for every
piece of dirty space in the system, so that __totlen can be killed off....

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 13:00:54 +01:00
David Woodhouse
b64335f2b7 [JFFS2] Add length argument to jffs2_add_physical_node_ref()
If __totlen is going away, we need to pass the length in separately.
Also stop callers from needlessly setting ref->next_phys to NULL,
since that's done for them... and since that'll also be going away soon.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 04:36:45 +01:00
David Woodhouse
49f11d4075 [JFFS2] Mark gaps in summary list as dirty space
Make sure we allocate a ref for any dirty space which exists between nodes
which we find in an eraseblock summary.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 04:00:01 +01:00
David Woodhouse
25090a6b23 [JFFS2] Discard remaining free space when filing a dirty block in scan.
The incoming ref_totlen() calculation is going to rely on the existence
of nodes which cover all dirty space. We can't just tweak the accounting
data any more; we have to call jffs2_scan_dirty_space() to do it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 03:57:56 +01:00
David Woodhouse
68270995f2 [JFFS2] Introduce jffs2_scan_dirty_space() function.
To eliminate the __totlen field from struct jffs2_raw_node_ref, we need
to allocate nodes for dirty space instead of just tweaking the accounting
data. Introduce jffs2_scan_dirty_space() in preparation for that.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 03:46:05 +01:00
David Woodhouse
7807ef7ba2 [JFFS2] Fix summary handling of unknown but compatible nodes.
For RWCOMPAT and ROCOMPAT nodes, we should still allow the mount to
succeed. Just abandon the summary and fall through to the full scan.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 03:45:27 +01:00
David Woodhouse
3560160aa2 [JFFS2] Fix memory leak in scan code; improve comments.
If we had to allocate extra space for the summary node, we weren't
correctly freeing it when jffs2_sum_scan_sumnode() returned nonzero --
which is both the success and the failure case. Only when it returned
zero, which means fall through to the full scan, were we correctly freeing
the buffer.

Document the meaning of those return codes while we're at it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 01:28:05 +01:00
David Woodhouse
6171586a7a [JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.
We should preserve these when we come to garbage collect them, not let
them get erased. Use jffs2_garbage_collect_pristine() for this, and make
sure the summary code copes -- just refrain from writing a summary for any
block which contains a node we don't understand.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 00:02:06 +01:00
David Woodhouse
fb9fbbcc93 [JFFS2] Correct accounting of erroneous cleanmarkers and failed summaries.
It should all be counted as dirty space, not wasted and _definitely_ not
unchecked.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 20:08:42 +01:00
David Woodhouse
f1f9671bd8 [JFFS2] Introduce jffs2_link_node_ref() function to reduce code duplication
The same sequence of code was repeated in many places, to add a new
struct jffs2_raw_node_ref to an eraseblock and adjust the space accounting
accordingly. Move it out-of-line.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 19:45:26 +01:00
David Woodhouse
0cfc7da3ff Merge git://git.infradead.org/jffs2-xattr-2.6
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 17:27:32 +01:00
David Woodhouse
1417fc44ee [JFFS2] Reduce calls to ref_totlen() in jffs2_mark_node_obsolete()
We were calling ref_totlen() 18 times. Even before that becomes a real
function rather than just a dereference, apparently some compilers still
suck anyway. It'll _certainly_ suck after ref_totlen() becomes more
complicated, so calculate it once and don't rely on CSE.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 16:20:19 +01:00
David Woodhouse
9641b784ff [JFFS2] Optimise reading of eraseblock summary nodes
This improves the time to mount 512MiB of NAND flash on my OLPC prototype
by about 4%. We used to read the last page of the eraseblock twice -- once
to find the offset of the summary node, and again to actually _read_ the
summary node. Now we read the last page only once, and read more only if
we need to.

We also don't allocate a new buffer just for the summary code -- we use
the buffer which was already allocated for the scan. Better still, if the
'buffer' for the scan is actually just a pointer directly into NOR flash,
we use that too, avoiding the memcpy() which we used to do.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 16:13:34 +01:00
Andrew Morton
6c8b44abc8 [MTD] Avoid 64-bit division in mtdconcat
WARNING: "__moddi3" [drivers/mtd/mtdconcat.ko] undefined!

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 10:17:21 +01:00
David Woodhouse
5fc3dbc418 [MTD] Use __symbol_get() instead of symbol_get() in NOR chip probe
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 02:41:34 +01:00
Andrew Morton
dcb6592d72 git-mtd: symbol_get() fix
drivers/mtd/devices/docprobe.c: In function `DoC_Probe':
drivers/mtd/devices/docprobe.c:338: warning: assignment from incompatible pointer type
drivers/mtd/devices/docprobe.c:341: warning: assignment from incompatible pointer type

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 02:39:43 +01:00
Ferenc Havasi
8e4482fba2 [JFFS2] Remove forgotten summary code
Remove forgotten lines from jffs2_scan_eraseblock() which
were unnecessary and may cause problem in some environments.

Thanks to Alexander Belyakov <alexander.belyakov@intel.com>.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-19 21:00:36 +01:00
David Woodhouse
aef9ab4784 [JFFS2] Support new device nodes
Device node major/minor numbers are just stored in the payload of a single
data node. Just extend that to 4 bytes and use new_encode_dev() for it.

We only use the 4-byte format if we _need_ to, if !old_valid_dev(foo).
This preserves backwards compatibility with older code as much as
possible. If we do make devices with major or minor numbers above 255, and
then mount the file system with the old code, it'll just read the first
two bytes and get the numbers wrong. If it comes to garbage-collect it,
it'll then write back those wrong numbers. But that's about the best we
can expect.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-19 00:28:49 +01:00
KaiGai Kohei
20a92fc74c Merge git://git.infradead.org/mtd-2.6 2006-05-19 00:43:53 +09:00
David Woodhouse
f6a673b3f4 [MTD] Fix printk format error in gen_probe.c
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 22:03:10 +01:00
David Woodhouse
fd0e518745 [MTD] Fix mtdconcat build. We didn't introduce mtd->writesize yet.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 21:53:58 +01:00
Alexander Belyakov
e8d32937d9 MTD: mtdconcat NAND/Sibley support (rev.2)
There is a second revision of "mtdconcat NAND/Sibley" patch. I hope
the patch will not get damaged as I'm posting it from gmail account,
thanks to Jorn.

The patch adds previously missing concat_writev(),
concat_writev_ecc(), concat_block_isbad(), concat_block_markbad()
functions to make concatenation layer compatible with Sibley and NAND
chips.

Patch has been cleared from whitespaces, fixed some lines of code as
requested. Also I have added code for alignment check that should
support Jorn's "writesize" patch.

Signed-off-by: Alexander Belyakov <alexander.belyakov@intel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 16:31:31 +01:00
Martin Michlmayr
ceb31db11f LASAT depends on MTD_CFI
The following difference was found between the mainline and linux-mips
kernel.  LASAT depends on MTD_CFI.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 16:20:57 +01:00
Martin Michlmayr
be21ce1197 Re-add module description for ms02-nv to Kconfig
In an unrelated MTD commit, a description about the ms02-nv module
got removed from Kconfig.  While I personally agree with this
removal, the module maintainer (Maciej W. Rozycki) would like to
see it added back.  In the absense of any consistency regarding
Kconfig descriptions his wish should be followed.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 16:20:37 +01:00
Sean Young
683b30c8e7 [MTD] RFD FTL: Be noisier, and don't assume block without RFD magic are erased
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 12:45:34 +01:00
Vitaly Wool
ae282d497d [MTD] generic: propagate oobavail to MTD partitions
'oobavail' parameter of mtd_info structure is now propagated to the MTD
partitions

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 12:34:27 +01:00
Sean Young
599fb3298b [PCMCIA MTD] Fix leak and crash on reboot
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 11:47:48 +01:00
Nicolas Pitre
c172471b78 cfi_cmdset_0001: factorize code to wait for flash status
This allows for much better abstraction and separation of the XIP and
non-XIP cases with their own specific implementations.  This fixes the
case where a timeout was tripped on in the XIP case by the code that
was meant for the non-XIP case only.

This also makes for a nice code reduction.

Signed-off-by: Nicolas Pitre <nico@cam.org>
CC: "Alexey, Korolev" <alexey.korolev@intel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 01:25:37 +01:00
Nicolas Pitre
6e7a6809c5 cfi-cmdset-0001: always update the chip status
... otherwise xip_enable() won't do the right thing.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 01:22:23 +01:00
Josh Boyer
df54b52c41 CHIPS: Fix potential starvation in cfi_cmdset_0001
The patch below fixes a potential starvation issue that can arise when
there is contention on a chip during a period when a process is
currently writing to it.  The starvation is avoided by conditionally
rescheduling when the chip is left in a state usable by other processes.

Signed-off-by: Josh Boyer <jdub@us.ibm.com>
Signed-off-by: Tom Gall <tom_gall@vnet.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-17 01:11:17 +01:00
David Woodhouse
ba9627b85f [JFFS2] Repack some on-medium structures. ARM is weirder than I thought.
We have to pack at least the jint16_t structure, because otherwise it'll
be four bytes in size. Thankfully, we can do that and _not_ pack the
actual node structures, and the compiler still doesn't emit stupid code.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-16 23:03:08 +01:00
Sergei Shtylyov
35af68b53a NAND: Fix NAND ECC errors on AMD Au1550
On AMD Au1550 the static bus controller fails to keep -CE asserted during
chip ready delay on read commands and the NAND chip being used requires this.
So, the current driver allows nand_base.c to drive -CE manually during the
entire sector read. When the PCMCIA driver is enabled however, occasionally
the ECC errors occur on NAND reads. This happens because the PCMCIA driver
polls sockets periodically and reads one of the board's control/status regs
(BCSRs) which are on the same static bus as the NAND flash, and just use
another chip select (and the NOR flash also resides on that bus), so as the
NAND driver forces NAND chip select asserted and the -RE signal is shared, a
contention occurs on the static bus when BCSR or NOR flash is read while we're
reading from NAND.
    So, we either can't keep interrupts enabled during the whole NAND sector
read (which is hardly acceptable), or have to implement some interlocking
scheme between multiple drivers (which is painful, and makes me shudder :-).
    There's a third way which has proven to work: to force -CE asserted only
while we're waiting for a NAND chip to become ready after a read command,
disabling interrupts for a maximum of 25 microseconds (according to Toshiba
TC58DVM92A1FT00 datasheet -- this chip is mentioned in the board schematics);
for Samsung NAND chip which seems to be actually used this delay is even less,
12 us.

Signed-off-by: Konstantin Baydarov <kbaidarov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-16 18:03:18 +01:00