Commit Graph

29654 Commits

Author SHA1 Message Date
Michael Krufky
8a17ef9756 V4L/DVB (3807): Cx88-blackbird: fix typo
BLACKBIRD_FIELD1_SAA7115 was repeated.  Corrected version reads:
blackbird_api_cmd(dev, BLACKBIRD_API_SET_CAPTURE_LINES, 2, 0,
                BLACKBIRD_FIELD1_SAA7115,
                BLACKBIRD_FIELD2_SAA7115
)

Thanks-to: Valentin Zagura <puthre@gmail.com> for pointing this out.
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:58:09 -03:00
Michael Krufky
707f813729 V4L/DVB (3806): Cx88-blackbird: allow proper detection of PAL vs. NTSC video standard
- removed test for CX88_BOARD_HAUPPAUGE_ROSLYN prior to determining whether
  the video standard in use is NTSC or PAL.
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:58:08 -03:00
Andrew de Quincey
473f54276a V4L/DVB (3805): Fix KNC1 card frontend detection
Since I reordered the CI/frontend detection, it turns out the frontend needs
to have a GPIO set to power it on; otherwise frontend init fails.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:58:07 -03:00
Michael Krufky
7a3165a152 V4L/DVB (3801): Cx88-tvaudio: replace 'if' with 'switch..case'
This patch cleans up a potential mess that has yet to occur in the
card-specific part of cx88-tvaudio.c that sets sound input from external adc.
It may be a good idea to move this setting into cx88-cards.c in the future.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:58:05 -03:00
Valentin Zagura
b3038304c9 V4L/DVB (3800): Cx88: added support for KWorld MCE 200 Deluxe
This patch adds support for KWorld MCE 200 Deluxe.
Raw video is working perfectly, MPEG capture using
cx88-blackbird is also working, but the quality
could be improved.
svideo and radio until they can be tested also.

Signed-off-by: Valentin Zagura <puthre@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:58:04 -03:00
Trent Piepho
7d0dc26952 V4L/DVB (3757): Fix alignment after the replacement from semaphore to muxex
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:58:03 -03:00
Adrian Bunk
5d7dc8c4f6 V4L/DVB (3770): Kill drivers/media/common/saa7146_vv_ksyms.c
This patch moves the EXPORT_SYMBOL's from
drivers/media/common/saa7146_vv_ksyms.c to the files with the actual 
functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:58:02 -03:00
Uwe Bugla
a8558577ff V4L/DVB (3769): Fix a type error in dvb_frontend.c
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:59 -03:00
Uwe Bugla
ed7f36b6c6 V4L/DVB (3768): Fix a tab error in cx14110.c, dprintk
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:58 -03:00
Michael Krufky
8c99024b88 V4L/DVB (3765): Dvb-bt8xx: add support for DViCO FusionHDTV DVB-T Lite 2nd revision
This patch adds support for the new revision of the DViCO
FusionHDTV DVB-T Lite, based on the zl10353 demod instead
of mt352.
Both mt352 and zl10353 revisions of this card have the
same PCI subsystem ID.

Acked-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Ack'd-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:57 -03:00
Michael Krufky
20fe4f6599 V4L/DVB (3764): Lgdt330x: update supported cards list in comments
- pcHDTV HD5500 ATSC/QAM uses LG DT3303

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:56 -03:00
Andrew de Quincey
d09dbf92ad V4L/DVB (3762): Add sysfs device links to dvb devices
Currently in /sys/class/dvb/dvbX.demuxY/ we have:
	dev
	uevent
With the patch, we have (for a PCI DVB device):
	dev
	device -> ../../../devices/pci0000:00/0000:00:1e.0/0000:03:0d.0
	uevent
So userspace tools can (finally) work out which physical device a DVB adapter
refers to. Previously you had to kinda look through dmesg and hope that it
hadn't been dumped out of the buffer. This makes debugging a lot easier if
the system has been up for a long time!
This is done by adding an extra 'struct device *' parameter to
dvb_register_adapter(). It will work with any kind of standard
linux 'device'. Additionally, if someone has an embedded system which does
things differently, they can simply supply 'NULL' and the behaviour will be
as before - the link will simply not appear.

Ack'd-by: Manu Abraham <manu@linuxtv.org>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:55 -03:00
Trent Piepho
76d313bfea V4L/DVB (3761): Silence some dprintk's in cx88-mpeg
Changeset 395c7c4d8f0c changed several dprintks from level 1 to level 0
(always on).  They generate four lines every time DMA starts, which don't
containing any information with a use outside of debugging.  This turns them
back to level 1.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:54 -03:00
Mauro Carvalho Chehab
4286c6f65e V4L/DVB (3753): Whitespace cleanups at media/radio
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:53 -03:00
Andrew de Quincey
dcdda65fd5 V4L/DVB (3741): Budget-core doesn't check if register adapter fails
If you have more than DVB_MAX_ADAPTERS in your machine, this causes an oops.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:52 -03:00
Trent Piepho
0dbbc0a7ce V4L/DVB (3739): Add support for FE_GET_FRONTEND to or51132 frontend
Adds the FE_GET_FRONTEND ioctl to the or51132 frontend.  Current modulation is
read from the hardware, while frequency is taken from the driver's state.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:50 -03:00
Michael Krufky
e142e7c418 V4L/DVB (3736): Cx88 cleanup: move CX88_BOARD_PCHDTV_HD5500 to the end of the cards array
- new cards should always be added to the end of the list.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:49 -03:00
Rusty Scott
da215d22d8 V4L/DVB (3735): Add support for pcHDTV HD5500 ATSC/QAM
Added card definitions for the pcHDTV HD5500 ATSC/QAM card

Signed-off-by: Rusty Scott <rustys@ieee.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:48 -03:00
Andreas Oberritter
62838084b4 V4L/DVB (3727): Remove DMX_GET_EVENT and associated data structures
The ioctl DMX_GET_EVENT has never been implemented.
I guess no software is using it because of its lack of implementation.
Future software won't use it, too, because this API doesn't make much
sense the way it is: Frontend events have their own different API.
Scrambling events can't be generated in a useful way by the hardware I
know of.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:47 -03:00
Trent Piepho
68ef505e31 V4L/DVB (3724): Remove a wee bit of cruft
A few lines that do nothing in the or51132 frontend, removed.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:45 -03:00
Trent Piepho
8718455472 V4L/DVB (3723): Avoid unnecessary firmware re-loads in or51132 frontend
As QAM_64, QAM_256, and QAM_AUTO all use the same firmware, switching
between these modulations doesn't require a firmware re-load.  This also
fixes a mishandled error condition, in which the firmware file is loaded
into the kernel, the clock mode is changed, but then the firmware upload
to the device fails.  The modulation change is aborted, but the clock
mode would still be changed.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:44 -03:00
Trent Piepho
005b541f88 V4L/DVB (3721): Fix spelling
It's "Terrestrial"

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:43 -03:00
Michael Krufky
d147ed2aa4 V4L/DVB (3720): Fix spelling error / typo in comments
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:42 -03:00
Michael Krufky
c3291069c2 V4L/DVB (3718): Removed trailing newlines
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:40 -03:00
Mauro Carvalho Chehab
2e7c6dc398 V4L/DVB (3715): Change all emails to the currently used one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:39 -03:00
Hans Verkuil
c7c0b34c27 V4L/DVB (3712): Fix video input setting of em28xx, use _INT_S_VIDEO_ROUTING in tvp5150
- Use new routing input defines in em28xx-cards.c
- Fix S-Video settings for tvp5150-based cards (input was copied from saa7115
  based cards and worked only because S-Video was selected in the default: case)
- Replace VIDIOC_S_INPUT by VIDIOC_INT_S_VIDEO_ROUTING in em28xx-video.c
- Remove the now obsolete VIDIOC_S_INPUT handler in saa7115.c
- Add VIDIOC_INT_G/S_VIDEO_ROUTING in tvp5150.c
- Add new media/tvp5150.h with the routing defines.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:38 -03:00
Hans Verkuil
b7f8292c96 V4L/DVB (3711): Add support for VIDIOC_INT_S_CRYSTAL_FREQ internal command.
Some saa7115-based cards use a different crystal frequency and a different
audio clock generation. Add a new VIDIOC_INT_S_CRYSTAL_FREQ command to be
able to set these values.
Also change the default APLL setting to 0. It makes no sense to have the
audio clock independent from the video clock, this can lead to audio/video
synchronization problems. Setting this to 0 is also consistent with the old
saa7114.c source and the way the Hauppauge Windows driver sets it.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:36 -03:00
Hans Verkuil
2eb606db11 V4L/DVB (3709): Improve line-in handling
- improve handling of the EXTERN input: don't start an unnecessary carrier scan
- improve the LOG_STATUS output
- ensure that a carrier scan is started again when switching back to the tuner.
- set correct prescale for L-NICAM

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:34 -03:00
Trent Piepho
0ead09180a V4L/DVB (3708a): Clean up some cruft in or51132 frontend
There is some old code in the or51133 firmware loading function that
has no effect.  Left a comment to in case it helps someone trying
to reverse engineer the chip.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 01:57:33 -03:00
Linus Torvalds
dfd8317d33 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits)
  [ARM] 3648/1: Update struct ucontext layout for coprocessor registers
  [ARM] Add identifying number for non-rt sigframe
  [ARM] Gather common sigframe saving code into setup_sigframe()
  [ARM] Gather common sigframe restoration code into restore_sigframe()
  [ARM] Re-use sigframe within rt_sigframe
  [ARM] Merge sigcontext and sigmask members of sigframe
  [ARM] Replace extramask with a full copy of the sigmask
  [ARM] Remove rt_sigframe puc and pinfo pointers
  [ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machines
  [ARM] 3645/1: S3C2412: irq support for external interrupts
  [ARM] 3643/1: S3C2410: Add new usb clocks
  [ARM] 3642/1: S3C24XX: Add machine SMDK2413
  [ARM] 3641/1: S3C2412: Fixup gpio register naming
  [ARM] 3640/1: S3C2412: Use S3C24XX_DCLKCON instead of S3C2410_DCLKCON
  [ARM] 3639/1: S3C2412: serial port support
  [ARM] 3638/1: S3C2412: core clocks
  [ARM] 3637/1: S3C24XX: Add mpll clock, and set as fclk parent
  [ARM] 3636/1: S3C2412: Add selection of CPU_ARM926
  [ARM] 3635/1: S3C24XX: Add S3C2412 core cpu support
  [ARM] 3633/1: S3C24XX: s3c2410 gpio bugfix - wrong pin nos
  ...
2006-06-24 17:48:14 -07:00
Linus Torvalds
83626b0127 Revert "[PATCH] usb: drivers/usb/core/devio.c dereferences a userspace pointer"
This reverts commit 786dc1d3d7.

As Al so eloquently points out, the patch is crap. The old code was fine,
the new code was bogus.

It never dereferenced a user pointer, the "->" operator was to an array
member, which gives the _address_ of the member (in user space), not an
actual dereference at all.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24 17:47:09 -07:00
Russell King
c089785655 Merge signal handler branch 2006-06-24 23:53:01 +01:00
Daniel Jacobowitz
85fe068123 [ARM] 3648/1: Update struct ucontext layout for coprocessor registers
Patch from Daniel Jacobowitz

In order for userspace to find saved coprocessor registers, move them from
struct rt_sigframe into struct ucontext.  Also allow space for glibc's
sigset_t, so that userspace and kernelspace can use the same ucontext
layout.  Define the magic numbers for iWMMXt in the header file for easier
reference.  Include the size of the coprocessor data in the magic numbers.

Also define magic numbers and layout for VFP, not yet saved.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 23:46:21 +01:00
Linus Torvalds
abb1cf3cb9 Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: radeon constify radeon microcode
  Add i915 ioctls to configure pipes for vblank interrupt.
  drm: update radeon to 1.25 add r200 vertex program support
  drm: radeon add a tcl state flush before accessing tcl vector space
2006-06-24 14:48:43 -07:00
Linus Torvalds
b464f57946 Merge branch 'intelfb-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6
* 'intelfb-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6:
  intelfb delousing
2006-06-24 14:48:35 -07:00
Linus Torvalds
b9d8be7828 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (40 commits)
  [SPARC64]: Update defconfig.
  [SPARC64]: Make auxio a real driver.
  [PARPORT] sunbpp: Convert to new SBUS device framework.
  [Documentation]: Update probing info in sbus_drivers.txt
  [SCSI] qlogicpti: Convert to new SBUS device framework.
  [SCSI] esp: Fix bug in esp_remove_common.
  [NET] sunhme: Kill useless loop over sdevs in quattro_sbus_find().
  [NET] myri_sbus: Kill unused next_module struct member.
  [NET] myri_sbus: Convert to new SBUS device layer.
  [NET] sunqe: Convert to new SBUS driver layer.
  [NET] sunbmac: Convert over to new SBUS device framework.
  [NET] sunlance: Convert to new SBUS driver framework.
  [NET] sunhme: Convert to new SBUS driver framework.
  [NET] sunhme: Kill __sparc__ and __sparc_v9__ ifdefs.
  [SCSI] sparc: Port esp to new SBUS driver layer.
  [SOUND] sparc: Port amd7930 to new SBUS device layer.
  [SBUS]: Rewrite and plug into of_device framework.
  [SPARC]: Port of_device layer and make ebus use it.
  [SPARC]: Port sparc64 in-kernel device tree code to sparc32.
  [SPARC64]: Add of_device layer and make ebus/isa use it.
  ...
2006-06-24 14:48:24 -07:00
Linus Torvalds
d02f40e81e Enable minimal per-device resume tracing
This is the minimal resume trace code to find which device resume (if
any) results in problems.  Usually, you'd use the information this
generates as a starting point to adding more fine-grained trace event
points.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24 14:47:59 -07:00
Linus Torvalds
eb71c87a49 Add some basic resume trace facilities
Considering that there isn't a lot of hw we can depend on during resume,
this is about as good as it gets.

This is x86-only for now, although the basic concept (and most of the
code) will certainly work on almost any platform.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24 14:44:01 -07:00
Russell King
ca195cfec9 [ARM] Add identifying number for non-rt sigframe
GDB couldn't reliably tell the difference between the old and new
non-rt sigframes, so provide it with a number at the beginning which
will never appear in the old sigframe, and hence provide gdb with a
reliable way to tell the two apart.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 22:41:09 +01:00
Russell King
e11c910b5b Merge S3C24xx branch 2006-06-24 22:21:49 +01:00
Russell King
c1e08adc86 Merge ep93xx branch 2006-06-24 22:21:35 +01:00
Ben Dooks
c9b949a734 [ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machines
Patch from Ben Dooks

Enable power management for Simtec Osiris

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:22:35 +01:00
Ben Dooks
a019f4a9a7 [ARM] 3645/1: S3C2412: irq support for external interrupts
Patch from Ben Dooks

Move the decoding of the IRQ_EXT4 and above out of
the entry macro, and into an chained irq handler
as the EXTINT registers move depending on the CPU
being used.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:37 +01:00
Ben Dooks
22346aea8d [ARM] 3643/1: S3C2410: Add new usb clocks
Patch from Ben Dooks

Make the S3C2410 use the same usb clock naming
as the S3C2412

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:36 +01:00
Ben Dooks
66c594098d [ARM] 3642/1: S3C24XX: Add machine SMDK2413
Patch from Ben Dooks

Add basic support for the Samsung/Aiji SMDK2413

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:35 +01:00
Ben Dooks
44cc7c9c15 [ARM] 3641/1: S3C2412: Fixup gpio register naming
Patch from Ben Dooks

The current S3C2412 has used to moving S3C24XX_
for the generic form of an register has been
moved from the S3C2410.

Fixup S3C2410_EXTINTx and S3C2410_EINFLTx to
S3C24XX_EXTINTx and S3C24XX_EXTINTx

Depends on Patch #3635/1, Patch #3640/1

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:33 +01:00
Ben Dooks
46491c94d3 [ARM] 3640/1: S3C2412: Use S3C24XX_DCLKCON instead of S3C2410_DCLKCON
Patch from Ben Dooks

The current S3C2412 support has moved to using
S3C24XX_DCLKCON unless the specific DCLKCON is
required (S3C2412_DCLKCON or S3C2410_DKCLKCON)

Move the few places using S3C2410_DCLKCON to
S3C24XX_DCLKCON

Depends on Patch #3635/1

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:32 +01:00
Ben Dooks
73e55cb3b3 [ARM] 3639/1: S3C2412: serial port support
Patch from Ben Dooks

Serial port support for the on-board UART blocks
on the Samsung S3C2412 and S3C2413 UARTs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:32 +01:00
Ben Dooks
736855f0c7 [ARM] 3638/1: S3C2412: core clocks
Patch from Ben Dooks

Clock support for the clocks on the Samsung S3C2412
and S3C2413 SoCs. This provides clock enables and
parent selection for all the standard clocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:31 +01:00
Ben Dooks
513846f828 [ARM] 3637/1: S3C24XX: Add mpll clock, and set as fclk parent
Patch from Ben Dooks

Update the clocks with the MPLL clock, and
use it as the parent. Also export these to
the rest of arch/arm/mach-s3c2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:29 +01:00