Commit Graph

1883 Commits

Author SHA1 Message Date
Linus Torvalds
ed09441dac Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
  [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n
  libiscsi: fix locking in iscsi_eh_device_reset
  libiscsi: check reason why we are stopping iscsi session to determine error value
  [SCSI] iscsi_tcp: return a descriptive error value during connection errors
  [SCSI] libiscsi: rename host reset to target reset
  [SCSI] iscsi class: fix endpoint id handling
  [SCSI] libiscsi: Support drivers initiating session removal
  [SCSI] libiscsi: fix data corruption when target has to resend data-in packets
  [SCSI] sd: Switch kernel printing level for DIF messages
  [SCSI] sd: Correctly handle all combinations of DIF and DIX
  [SCSI] sd: Always print actual protection_type
  [SCSI] sd: Issue correct protection operation
  [SCSI] scsi_error: fix target reset handling
  [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events
  [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling
  [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted
  [SCSI] scsi_dh_alua: remove REQ_NOMERGE
  [SCSI] lpfc 8.2.8 : update driver version to 8.2.8
  [SCSI] lpfc 8.2.8 : Add MSI-X support
  [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED
  ...
2008-10-17 09:00:23 -07:00
Greg Kroah-Hartman
91bd418fdc device create: infiniband: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:42 -07:00
Steven Whitehouse
a447c09324 vfs: Use const for kernel parser table
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 10:10:37 -07:00
Mike Christie
8e12452549 [SCSI] libiscsi: rename host reset to target reset
I had this in my patchset to add target reset support, but
it got dropped due to patching conflicts. This initial patch
just renames the function and users. We are actually just
dropping the session, and so this does not have anything to do
with the host exactly. It does for software iscsi because
we allocate a host per session, but for cxgb3i this makes no
sense.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:59 -04:00
Mike Christie
e5bd7b54e9 [SCSI] libiscsi: Support drivers initiating session removal
If the driver knows when hardware is removed like with cxgb3i,
bnx2i, qla4xxx and iser then we will want to remove the sessions/devices
that are bound to that device before removing the host.

cxgb3i and in the future bnx2i will remove the host and that will
remove all the sessions on the hba. iser can call iscsi_kill_session
when it gets an event that indicates that a hca is removed.
And when qla4xxx is hooked in to the lib (it is only hooked into
the class right now) it can call iscsi remove host like the
partial offload card drivers.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:59 -04:00
Roland Dreier
eedd5d0a70 Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', 'mlx4', 'mthca' and 'nes' into for-next 2008-10-09 17:41:15 -07:00
Chien Tung
fbcffcc6a0 RDMA/nes: Fix slab corruption
Referencing cm_node after it is freed via rem_ref_cm_node() causes a
slab corruption.  There is no need to set cm_node->cm_id to NULL in
mini_cm_close().

Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-09 17:41:05 -07:00
Vladimir Sokolovsky
d57f5f72df IB/mlx4: Set RLKEY bit for kernel QPs
Set RLKEY bit in the HW context for kernel QPs so that kernel QPs can
use the reserved L_Key for memory reference.

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-08 20:09:01 -07:00
Chien Tung
e2f5e7333a RDMA/nes: Correct error_module bit mask
error_module is 5 bits wide not 4.  The corresponding crit_error_count
array is correct with 32 entries.

Signed-off-by: Chien Tung <ctung@neteffect.com>
--
 drivers/infiniband/hw/nes/nes_hw.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-08 14:43:29 -07:00
Bob Sharp
7191a0a182 RDMA/nes: Fix routed RDMA connections
Fix routed RDMA connections to destinations where the next hop is not
the final destination.  Use neigh_*() to properly locate neighbor.

Signed-off-by: Bob Sharp <bsharp@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
2008-10-03 12:21:19 -07:00
Vadim Makhervaks
7e36d3d732 RDMA/nes: Enhanced PFT management scheme
Change management of perfect filter table to allow enhanced
performance applications.

Signed-off-by: Vadim Makhervaks <vmakhervaks@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-03 12:21:18 -07:00
Faisal Latif
1bb2849997 RDMA/nes: Handle AE bounds violation
Handle async error NES_AEQE_AEID_AMP_BOUNDS_VIOLATION.

Signed-off-by: Faisal Latif <flatif@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:49 -07:00
Chien Tung
9d156947c7 RDMA/nes: Limit critical error interrupts
Mask off a critical error after 100 critical error interrupts to
keep the system "sane".

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:49 -07:00
Chien Tung
068e80de6a RDMA/nes: Stop spurious MAC interrupts
Mask off MAC interrupts on netdev_stop to prevent spurious MAC interrupts
on unload/reload of iw_nes.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:49 -07:00
Chien Tung
168ac8244d RDMA/nes: Correct tso_wqe_length
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:48 -07:00
Chien Tung
0c93ae355e RDMA/nes: Fill in firmware version for ethtool
Fill in firmware version for ethtool_drvinfo.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:48 -07:00
John Lacombe
27ffed603f RDMA/nes: Use ethtool timer value
Use timer value set via ethtool intead of #defines.

Signed-off-by: John Lacombe <jlacombe@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:48 -07:00
Bob Sharp
a06fd26d48 RDMA/nes: Correct MAX TSO frags value
Use correct define for max TSO fragments.

Signed-off-by: Bob Sharp <bsharp@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:48 -07:00
Bob Sharp
e0e31afbf9 RDMA/nes: Enable MC/UC after changing MTU
Re-enable multicast and unicast after changing MTU.

Signed-off-by: Bob Sharp <bsharp@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:47 -07:00
Bob Sharp
7a8d14070b RDMA/nes: Free NIC TX buffers when destroying NIC QP
Signed-off-by: Bob Sharp <bsharp@neteffect.com>
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:47 -07:00
Chien Tung
e88bd7b624 RDMA/nes: Fix MDC setting
Clear MDC bits before setting them to a new value.  Adjust MDC value
for 10G.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:47 -07:00
Chien Tung
2b537c2824 RDMA/nes: Add wqm_quanta module option
Add a module parameter wqm_quanta.  It controls the number of segments
transmitted at a time.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:46 -07:00
Chien Tung
de182149c3 RDMA/nes: Module parameter permissions
Change permission to 0644 so root can set mpa_version, disable_mpa_crc,
send_first, and nes_drv_opt at runtime.

Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 15:35:46 -07:00
Jon Mason
c752c78275 RDMA/cxgb3: Set active_mtu in ib_port_attr
When running ibv_devinfo, the active_mtu returned is garbage.  This is
due to the field not being populated in the query_port function in the
driver.  The patch below populates the active_mtu field with a MTU of
2k.  It also zeros the struct, so that any new additions to it will
return 0.

Signed-off-by: Jon Mason <jon@opengridcomputing.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 14:51:19 -07:00
Chien Tung
fcb7ad31be RDMA/nes: Add support for 4-port 1G HP blade card
Add support for NetEffect 4 port 1G HP blade card.  The mapping
between physical port and MAC is different from the standup card.

Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 14:49:44 -07:00
Faisal Latif
54c86a8c83 RDMA/nes: Make mini_cm_connect() static
Signed-off-by: Faisal Latif <flatif@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 14:47:27 -07:00
Hefty, Sean
a7e80ce26c IB/cm: Correctly free cm_device structure
commit 110cf374 ("infiniband: make cm_device use a struct device and
not a kobject.") introduced a memory leak, since it deleted
cm_release_dev_obj(), which was where cm_dev was freed.  Fix this by
freeing the leaked structure after calling device_unregister().

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 10:36:54 -07:00
Roland Dreier
943c246e9b IPoIB: Use netif_tx_lock() and get rid of private tx_lock, LLTX
Currently, IPoIB is an LLTX driver that uses its own IRQ-disabling
tx_lock.  Not only do we want to get rid of LLTX, this actually causes
problems because of the skb_orphan() done with this tx_lock held: some
skb destructors expect to be run with interrupts enabled.

The simplest fix for this is to get rid of the driver-private tx_lock
and stop using LLTX.  We kill off priv->tx_lock and use
netif_tx_lock[_bh]() instead; the patch to do this is a tiny bit
tricky because we need to update places that take priv->lock inside
the tx_lock to disable IRQs, rather than relying on tx_lock having
already disabled IRQs.

Also, there are a couple of places where we need to disable BHs to
make sure we have a consistent context to call netif_tx_lock() (since
we no longer can use _irqsave() variants), and we also have to change
ipoib_send_comp_handler() to call drain_tx_cq() through a timer rather
than directly, because ipoib_send_comp_handler() runs in interrupt
context and drain_tx_cq() must run in BH context so it can call
netif_tx_lock().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 10:36:21 -07:00
Roland Dreier
208dde28b0 IB/mthca: Use pci_request_regions()
Back in prehistoric (pre-git!) days, the kernel's MSI-X support did
request_mem_region() on a device's MSI-X tables, which meant that a
driver that enabled MSI-X couldn't use pci_request_regions() (since
that would clash with the PCI layer's MSI-X request).

However, that was removed (by me!) years ago, so mthca can just use
pci_request_regions() and pci_release_regions() instead of its own
much more complicated code that avoids requesting the MSI-X tables.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29 21:37:33 -07:00
Yannick Cote
e441d63428 IB/ipath: Fix hang on module unload
Handle the case where posting a send is requested when the link is
down.  This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1117>.

Signed-off-by: Yannick Cote <yannick.cote@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29 21:24:04 -07:00
Roland Dreier
c9da4bad5b IPoIB: Fix crash when path record fails after path flush
Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM
change events") changed how paths are flushed on an SM event.  This
change introduces a problem if the path record query triggered by
fails, causing path->ah to become NULL.  A later successful path query
will then trigger WARN_ON() in path_rec_completion(), and crash
because path->ah has already been freed, so the ipoib_put_ah() inside
the lock in path_rec_completion() may actually drop the last reference
(contrary to the comment that claims this is safe).

Fix this by updating path->ah and freeing old_ah only when the path
record query is successful.  This prevents the neighbour AH and that
path AH from getting out of sync.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1194>

Reported-by: Rabah Salem <ravah@mellanox.com>
Debugged-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-25 15:26:15 -07:00
Julia Lawall
cd86f42061 IB: Drop code after return statement
A break after a return serves no purpose, remove it.

Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:06:32 -07:00
Michael Brooks
7097228c54 IB/mad: Don't discard BMA responses in kernel
This fixes the problem of incoming BMA responses being dropped due to
a bad "is response" check.  Fix the test to use the ib_response_mad()
predicate, which correctly handles BMA MADs.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=988>.

Signed-off-by: Michael Brooks <michael.brooks@qlogic.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:06:16 -07:00
Ralph Campbell
9403589675 IB/ipath: Fix SLID generation for RC/UC QPs when LMC > 0
The code to set the source LID in the sent LRH was not setting the low
bits if LMC != 0 for RC/UC QPs.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:05:51 -07:00
Alexander Schmidt
b9012e0a42 IB/ehca: Generate flush status CQ entries
When a QP goes into error state, it is required that CQ entries with a
flush error status are delivered to the application for any
outstanding work requests.  eHCA does not do this in hardware, so this
patch adds software flush CQE generation to the ehca driver.

Whenever a QP gets into error state, it is added to the QP error list
of its respective CQ.  If the error QP list of a CQ is not empty,
poll_cq() generates flush CQEs before polling the actual CQ.

Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:05:21 -07:00
Linus Torvalds
5a0cd4eb66 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop()
  RDMA/nes: Fix client side QP destroy
  IB/mlx4: Fix up fast register page list format
  mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
2008-09-19 16:18:21 -07:00
Roland Dreier
7e2c232854 Merge branches 'ipoib', 'mlx4' and 'nes' into for-linus 2008-09-16 11:57:52 -07:00
Yossi Etigin
e8224e4b80 IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop()
Taking rtnl_lock in ipoib_mcast_join_complete() causes a deadlock with
ipoib_stop().  We avoid it by scheduling the piece of code that takes
the lock on ipoib_workqueue instead of executing it directly.  This
works because we only flush the ipoib_workqueue with the RTNL not held.

The deadlock happens because ipoib_stop() calls ipoib_ib_dev_down()
which calls ipoib_mcast_dev_flush(), which calls ipoib_mcast_free(),
which calls ipoib_mcast_leave(). The latter calls
ib_sa_free_multicast(), and this waits until the multicast completion
handler finishes.  This handler is ipoib_mcast_join_complete(), which
waits for the rtnl_lock(), which was already taken by ipoib_stop().

This bug was introduced in commit a77a57a1 ("IPoIB: Fix deadlock on
RTNL in ipoib_stop()").

Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-16 11:57:45 -07:00
Faisal Latif
d7ffd5076d RDMA/nes: Fix client side QP destroy
Fix QP not being destroyed properly on the client, which leads to
userspace programs hanging on exit.  This is a missing chunk from the
connection management rewrite in commit 6492cdf3 ("RDMA/nes: CM
connection setup/teardown rework").

Signed-off-by: Faisal Latif <flatif@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-16 11:56:26 -07:00
Vladimir Sokolovsky
29bdc88384 IB/mlx4: Fix up fast register page list format
Byte swap the addresses in the page list for fast register work requests
to big endian to match what the HCA expectx.  Also, the addresses must
have the "present" bit set so that the HCA knows it can access them.
Otherwise the HCA will fault the first time it accesses the memory
region.

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-15 14:25:23 -07:00
Vladimir Sokolovsky
4c246edd25 IB/mlx4: Actually return L_Key and R_Key for fast register MRs
Initialize the L_Key and R_Key for memory regions returned from
mlx4_ib_alloc_fast_reg_mr().  Otherwise callers just get garbage for
the memory keys and can't do anything useful with these MRs.

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-27 14:40:38 -07:00
Adrian Bunk
7a8fc9b248 removed unused #include <linux/version.h>'s
This patch lets the files using linux/version.h match the files that
#include it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-23 12:14:12 -07:00
Roland Dreier
45dd75d83c Merge branches 'ipath' and 'ipoib' into for-linus 2008-08-19 15:01:45 -07:00
Roland Dreier
a77a57a1a2 IPoIB: Fix deadlock on RTNL in ipoib_stop()
Commit c8c2afe3 ("IPoIB: Use rtnl lock/unlock when changing device
flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which
is run from the ipoib_workqueue.  However, ipoib_stop() (which is run
inside rtnl_lock()) flushes this workqueue, which leads to a deadlock
if the join task is pending.

Fix this by simply not flushing the workqueue from ipoib_stop().  It
turns out that we really don't care about workqueue tasks running
during or after ipoib_stop(), as long as we make sure to flush the
workqueue before unregistering a netdev.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1114>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-19 15:01:32 -07:00
Dave Olson
24babadec0 IB/ipath: Fix incorrect check for max physical address in TID
The check for max physical address was incorrect, thus limiting the
range of allowed physical addresses.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-15 11:25:20 -07:00
Ralph Campbell
7ec01ff950 IB/ipath: Fix lost UD send work request
If a UD QP has some work requests queued to be sent by the DMA engine
followed by a local loopback work request, we have to wait for the
previous work requests to finish or the completion for the local
loopback work request would be generated out of order.  The problem
was that the work request queue pointer was already updated so that
the request would not be processed when the DMA queue drained.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-15 11:23:47 -07:00
Roland Dreier
3a3eae0d66 Merge branches 'ehca' and 'ipoib' into for-linus 2008-08-12 13:52:54 -07:00
Alexander Schmidt
6773f079b7 IB/ehca: Discard double CQE for one WR
Under rare circumstances, the ehca hardware might erroneously generate
two CQEs for the same WQE, which is not compliant to the IB spec and
will cause unpredictable errors like memory being freed twice. To
avoid this problem, the driver needs to detect the second CQE and
discard it.

For this purpose, introduce an array holding as many elements as the
SQ of the QP, called sq_map. Each sq_map entry stores a "reported"
flag for one WQE in the SQ. When a work request is posted to the SQ,
the respective "reported" flag is set to zero. After the arrival of a
CQE, the flag is set to 1, which allows to detect the occurence of a
second CQE.

The mapping between WQE / CQE and the corresponding sq_map element is
implemented by replacing the lowest 16 Bits of the wr_id with the
index in the queue map. The original 16 Bits are stored in the sq_map
entry and are restored when the CQE is passed to the application.

Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12 11:34:59 -07:00
Alexander Schmidt
129a10fb81 IB/ehca: Check idr_find() return value
The idr_find() function may fail when trying to get the QP that is
associated with a CQE, e.g. when a QP has been destroyed between the
generation of a CQE and the poll request for it.  In consequence, the
return value of idr_find() must be checked and the CQE must be
discarded when the QP cannot be found.

Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12 11:34:59 -07:00
Alexander Schmidt
17c2b53adb IB/ehca: Repoll CQ on invalid opcode
When the ehca driver detects an invalid opcode in a CQE, it currently
passes the CQE to the application and returns with success. This patch
changes the CQE handling to discard CQEs with invalid opcodes and to
continue reading the next CQE from the CQ.

Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12 11:34:58 -07:00