Commit Graph

180760 Commits

Author SHA1 Message Date
Rafael J. Wysocki
9630bdd9b1 ACPI: Use GPE reference counting to support shared GPEs
ACPI GPEs may map to multiple devices.  The current GPE interface
only provides a mechanism for enabling and disabling GPEs, making
it difficult to change the state of GPEs at runtime without extensive
cooperation between devices.

Add an API to allow devices to indicate whether or not they want
their device's GPE to be enabled for both runtime and wakeup events.

Remove the old GPE type handling entirely, which gets rid of various
quirks, like the implicit disabling with GPE type setting. This
requires a small amount of rework in order to ensure that non-wake
GPEs are enabled by default to preserve existing behaviour.

Based on patches from Matthew Garrett <mjg@redhat.com>.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:20:45 -08:00
Rafael J. Wysocki
c39fae1416 PCI PM: Make it possible to force using INTx for PCIe PME signaling
Apparently, some machines may have problems with PCI run-time power
management if MSIs are used for the native PCIe PME signaling.  In
particular, on the MSI Wind U-100 PCIe PME interrupts are not
generated by a PCIe root port after a resume from suspend to RAM, if
the system wake-up was triggered by a PME from the device attached to
this port.  [It doesn't help to free the interrupt on suspend and
request it back on resume, even if that is done along with disabling
the MSI and re-enabling it, respectively.]  However, if INTx
interrupts are used for this purpose on the same machine, everything
works just fine.

For this reason, add a kernel command line switch allowing one to
request that MSIs be not used for the native PCIe PME signaling,
introduce a DMI table allowing us to blacklist machines that need
this switch to be set by default and put the MSI Wind U-100 into this
table.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:20:39 -08:00
Rafael J. Wysocki
c7f486567c PCI PM: PCIe PME root port service driver
PCIe native PME detection mechanism is based on interrupts generated
by root ports or event collectors every time a PCIe device sends a
PME message upstream.

Once a PME message has been sent by an endpoint device and received
by its root port (or event collector in the case of root complex
integrated endpoints), the Requester ID from the message header is
registered in the root port's Root Status register.  At the same
time, the PME Status bit of the Root Status register is set to
indicate that there's a PME to handle.  If PCIe PME interrupt is
enabled for the root port, it generates an interrupt once the PME
Status has been set.  After receiving the interrupt, the kernel can
identify the PCIe device that generated the PME using the Requester
ID from the root port's Root Status register. [For details, see PCI
Express Base Specification, Rev. 2.0.]

Implement a driver for the PCIe PME root port service working in
accordance with the above description.

Based on a patch from Shaohua Li <shaohua.li@intel.com>.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:20:31 -08:00
Rafael J. Wysocki
58ff463396 PCI PM: Add function for checking PME status of devices
Add function pci_check_pme_status() that will check the PME status
bit of given device and clear it along with the PME enable bit.  It
will be necessary for PCI run-time power management.

Based on a patch from Shaohua Li <shaohua.li@intel.com>

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:20:24 -08:00
Kenji Kaneshige
6d3be84aab PCI: mark is_pcie obsolete
The "is_pcie" field in struct pci_dev is no longer needed because
struct pci_dev has PCIe capability offset in "pcie_cap" field and
(pcie_cap != 0) means the device is PCIe capable. This patch marks
"is_pcie" fields obsolete.

Current users of "is_pcie" field are:

- drivers/ssb/scan.c
- drivers/net/wireless/ath/ath9k/pci.c
- drivers/net/wireless/ath/ath5k/attach.c
- drivers/net/wireless/ath/ath5k/reset.c
- drivers/acpi/hest.c
- drivers/pci/pcie/pme/pcie_pme.c

Will post patches for each to use pci_is_pcie() as a follow-up.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:26 -08:00
Yinghai Lu
9958610552 PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges
Make pci_bridge_check_ranges() store the PCI_PREF_RANGE_TYPE_64 in
addition to IORESOURCE_MEM_64.  Just like pci_read_bridge_bases().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:25 -08:00
Yinghai Lu
32180e402f PCI: pciehp: second try to get big range for pcie devices
Handle the case where the slot bridge that doesn't get a pre-allocated
resource big enough to handle its child resources..  For example pcie
devices need 256M, but the bridge only gets 2M preallocated.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:25 -08:00
Yinghai Lu
9789ac979b PCI: pciehp: cleanup flow in pciehp_configure_device
Move bus_size_bridges and assign resources out of pciehp_add_bridge()
and do them all together, one time, including slot bridge, to avoid to
calling assign resources several times when there are several bridges
under the slot bridge.  Using pci_assign_unassigned_bridge_resources.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:24 -08:00
Yinghai Lu
6841ec681a PCI: introduce pci_assign_unassigned_bridge_resources
For use by pciehp.

pci_setup_bridge() will not check enabled for the slot bridge, otherwise
update res is not updated to bridge BAR.  That is, bridge is already
enabled for port service.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:23 -08:00
Yinghai Lu
977d17bb17 PCI: update bridge resources to get more big ranges in PCI assign unssigned
BIOS separates IO ranges between several IOHs, and on some slots, BIOS assigns
resources to a bridge, but stops assigning resources to the device under that
bridge, because the device needs a big resource.

So:
  1. allocate resources and record the failed device resources
  2. clear the BIOS assigned resources of the parent bridge of failing device
  3. go back and call pci assign unassigned
  4. if it still fails, go up the tree, clear more bridges. and try again

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:22 -08:00
Yinghai Lu
d65245c329 PCI: don't shrink bridge resources
When clearing leaf bridge resources, trying to get a big enough one, we
could shrink the bridge if there is no resource under it.  Confirm
against the old resource side to make sure we're increasing the
allocation.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:21 -08:00
Yinghai Lu
cd81e1ea1a PCI: reject mmio ranges starting at 0 on pci_bridge read
We already track unassigned resources in struct resource, and this
prevents us from overwriting resource flags and info in the unassigned
case.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:21 -08:00
Yinghai Lu
568ddef873 PCI: add failed_list to pci_bus_assign_resources
This allows us to track failed allocations for later re-trying with
reallocation.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:20 -08:00
Yinghai Lu
5009b46025 PCI: add pci_bridge_release_resources and pci_bus_release_bridge_resources
We use this in later patches to free resrouce ranges for reassignment in
an effort to support a wider variety of PCI topologies.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:19 -08:00
Andrew Morton
ba02b242bb PCI hotplug: check ioremap() return value in ibmphp_ebda.c
check ioremap() return value.

Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:19 -08:00
Randy Dunlap
939fdc6735 PCI hotplug: fix ibmphp build error
Add header file to fix build error:

drivers/pci/hotplug/ibmphp_hpc.c:135: error: implicit declaration of function 'init_MUTEX'
drivers/pci/hotplug/ibmphp_hpc.c:136: error: implicit declaration of function 'init_MUTEX_LOCKED'
drivers/pci/hotplug/ibmphp_hpc.c:797: error: implicit declaration of function 'down'
drivers/pci/hotplug/ibmphp_hpc.c:807: error: implicit declaration of function 'up'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:18 -08:00
Matthew Wilcox
4fb88c1a28 PCI: Make pci_scan_slot more robust
Yinghai pointed out that the new pci_scan_slot() crashes when called
on an ARI-capable slot that is empty.  Fix this by exiting early from
pci_scan_slot if there is no device in the slot.

Also make next_ari_func() robust against devices not existing in case
the ARI capability is corrupt.  ARI also requires that the devices be
listed in order, so if we find a function listed that is out of order,
stop scanning to prevent loops.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:17 -08:00
Jiri Slaby
0bf01c3c86 PCI: hotplug/cpcihp, fix pci device refcounting
Stanse found an ommitted pci_dev_put on one error path in
cpcihp_generic_init. The path is taken on !dev, but also when
dev->hdr_type != PCI_HEADER_TYPE_BRIDGE. However it omits to
pci_dev_put on the latter.

As it is fine to pass NULL to pci_dev_put, put it in there
uncoditionally.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Scott Murray <scott@spiteful.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:02 -08:00
Tilman Schmidt
41a68a748b PCI: push deprecated pci_find_device() function to last user
The ISDN4Linux HiSax driver family contains the last remaining users
of the deprecated pci_find_device() function. This patch creates a
private copy of that function in HiSax, and removes the now unused
global function together with its controlling configuration option,
CONFIG_PCI_LEGACY.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:01 -08:00
Yinghai Lu
7c9342b8dd PCI: don't dump resource when bus resource flags indicates unused
Don't print out resources without flags to avoid cluttering up the debug
output.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:00 -08:00
Yinghai Lu
5eeec0ec93 resource: add release_child_resources
Useful for freeing a portion of the resource tree, e.g. when trying to
reallocate resources more efficiently.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:00 -08:00
Yinghai Lu
7cc5997d1d PCI: separate pci_setup_bridge to small functions
This is a good cleanup in itself, and makes it easier to modify specific
resource types in later code.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:59 -08:00
Chandru
b0fc889c43 PCI hotplug: ibmphp: read the length of ebda and map entire ebda region
ibmphp driver currently maps only 1KB of ebda memory area into kernel address
space during driver initialization. This causes kernel oops when the driver is
modprobe'd and it accesses memory beyond 1KB within ebda segment. The first
byte of ebda segment actually stores the length of the ebda region in
Kilobytes. Hence make use of the length parameter and map the entire ebda
region.

Signed-off-by: Chandru Siddalingappa <chandru@linux.vnet.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:58 -08:00
Jiri Slaby
6fcaf17ac7 PCI hotplug: fix memory leaks
Stanse found a cut&pasted memory leak in pciehp_queue_pushbutton_work
and shpchp_queue_pushbutton_work. info is not freed/assigned on all
paths. Fix that.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:57 -08:00
Dominik Brodowski
3b7a17fcda resource/PCI: mark struct resource as const
Now that we return the new resource start position, there is no
need to update "struct resource" inside the align function.
Therefore, mark the struct resource as const.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:57 -08:00
Dominik Brodowski
b26b2d494b resource/PCI: align functions now return start of resource
As suggested by Linus, align functions should return the start
of a resource, not void. An update of "res->start" is no longer
necessary.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:56 -08:00
Seth Heasley
93da620226 x86/PCI: irq and pci_ids patch for Intel Cougar Point DeviceIDs
This patch adds the Intel Cougar Point (PCH) LPC and SMBus Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:55 -08:00
Rafael J. Wysocki
93177a748b PCI: Clean up build for CONFIG_PCI_QUIRKS unset
Currently, drivers/pci/quirks.c is built unconditionally, but if
CONFIG_PCI_QUIRKS is unset, the only things actually built in this
file are definitions of global variables and empty functions (due to
the #ifdef CONFIG_PCI_QUIRKS embracing all of the code inside the
file).  This is not particularly nice and if someone overlooks
the #ifdef CONFIG_PCI_QUIRKS, build errors are introduced.

To clean that up, move the definitions of the global variables in
quirks.c that are always built to pci.c, move the definitions of
the empty functions (compiled when CONFIG_PCI_QUIRKS is unset) to
headers (additionally make these functions static inline) and modify
drivers/pci/Makefile so that quirks.c is only built if
CONFIG_PCI_QUIRKS is set.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:15:21 -08:00
Jesse Barnes
3804259475 PCI hotplug: remove obsolete usage of get_bus_speed from rpaphp hotplug ops
No longer needed and causes build breakage.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:15:20 -08:00
Matthew Wilcox
9dfd97fe12 PCI: Add support for reporting PCIe 3.0 speeds
Add the 8.0 GT/s speed.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:15:19 -08:00
Matthew Wilcox
45b4cdd57e PCI: Add support for AGP in cur/max bus speed
Take advantage of some gaps in the table to fit in support for AGP speeds.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:15:19 -08:00
Matthew Wilcox
9be60ca049 PCI: Add support for detection of PCIe and PCI-X bus speeds
Both PCIe and PCI-X bridges report their secondary bus speed in their
respective capabilities.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:15:18 -08:00
Matthew Wilcox
3749c51ac6 PCI: Make current and maximum bus speeds part of the PCI core
Move the max_bus_speed and cur_bus_speed into the pci_bus.  Expose the
values through the PCI slot driver instead of the hotplug slot driver.
Update all the hotplug drivers to use the pci_bus instead of their own
data structures.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:15:17 -08:00
Matthew Wilcox
536c8cb49e PCI: Unify pcie_link_speed and pci_bus_speed
These enums must not overlap anyway, since we only have a single
pci_bus_speed_strings array.  Use a single enum, and move it to
pci.h.  Add 'SPEED' to the pcie names to make it clear what they are.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:15:17 -08:00
Matthew Wilcox
f07852d644 PCI: Rewrite pci_scan_slot
The Alternate Routing-ID Interpretation capability allows a single device
to have up to 256 functions.  They can be populated sparsely, so the
current technique of scanning every eighth function is not guaranteed
to find them all.  By introducing a 'next_fn' function pointer, we can
use the linked list of functions in the ARI capability to scan all the
functions which exist.

We can then speed up the pci_scan_slot by skipping the scan of subsequent
devfns for PCIe devices which are the direct children of Root Ports or
Downstream Ports.  These devices are only permitted to implement device
0, unless they are ARI devices, in which case they'll be scanned by the
ARI code above.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:15:16 -08:00
Linus Torvalds
bee415ce42 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf probe: Init struct probe_point and set counter correctly
  hw-breakpoint: Keep track of dr7 local enable bits
  hw-breakpoints: Accept breakpoints on NULL address
  perf_events: Fix FORK events
2010-02-22 08:55:32 -08:00
Linus Torvalds
627fa177a1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: usbtouchscreen - extend coordinate range for Generaltouch devices
  Input: polldev can cause crash in case when polling disabled
2010-02-22 08:48:06 -08:00
Rafael J. Wysocki
61caf87cb5 i915 / PM: Fix hibernate regression caused by suspend/resume splitting
Commit 84b79f8d28 (drm/i915: Fix crash
while aborting hibernation) attempted to fix a regression introduced
by commit cbda12d77e (drm/i915:
implement new pm ops for i915), but it went too far trying to split
the freeze/suspend and resume/thaw parts of the code.  As a result,
it introduced another regression, which only is visible on some systems.

Fix the problem by merging i915_drm_suspend() with
i915_drm_freeze() and moving some code from i915_resume()
into i915_drm_thaw(), so that intel_opregion_free() and
intel_opregion_init() are also executed in the freeze and thaw code
paths, respectively.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Pedro Ribeiro <pedrib@gmail.com>
Tested-by: Tino Keitel <tino.keitel@tikei.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-22 08:47:14 -08:00
Masami Hiramatsu
388c3aab5d perf probe: Init struct probe_point and set counter correctly
Clear struct probe_point before using it in
show_perf_probe_events(), and set pp->found counter correctly in
synthesize_perf_probe_point(). Without this initialization,
clear_probe_point() will free random addresses.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20100218181652.26547.57790.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-22 11:42:27 +01:00
Roy Yin
eb083ba260 Input: usbtouchscreen - extend coordinate range for Generaltouch devices
Generaltouch protocol allows for coordinates in [0, 0xffff] range and
there are devices reporting coordinates as high as 0x7fff so let's update
the driver to reflect that.

Signed-off-by: Roy Yin <yhch@generaltouch.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-21 23:02:51 -08:00
Linus Torvalds
4386b58349 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Fix struct stat uid/gid types.
2010-02-21 19:45:24 -08:00
David S. Miller
2531be413b sparc32: Fix struct stat uid/gid types.
Commit 085219f79c
("sparc32: use proper types in struct stat")

Accidently changed the struct stat uid/gid members
to uid_t and gid_t, but those get set to
__kernel_uid32_t and __kernel_gid32_t respectively.
Those are of type 'int' but the structure is meant
to have 'short'.  So use uid16_t and gid16_t to
correct this.

Reported-by: Rob Landley <rob@landley.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-21 18:03:16 -08:00
Linus Torvalds
d13536bef4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] bfin: fix max timeout calculation
2010-02-21 11:25:47 -08:00
Mike Frysinger
3dae93ec3e [WATCHDOG] bfin: fix max timeout calculation
Relying on overflow/wrap around isn't exact because if you wrap far
enough, you get back to "valid" values.

Reported-by: Thorsten Pohlmann <pohlmann@tetronik.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2010-02-21 19:16:30 +00:00
H. Peter Anvin
87b8d1adef mm: Make copy_from_user() in migrate.c statically predictable
x86-32 has had a static test for copy_on_user() overflow for a while.
This test currently fails in mm/migrate.c resulting in an
allyesconfig/allmodconfig build failure on x86-32:

In function ‘copy_from_user’,
    inlined from ‘do_pages_stat’ at
    /home/hpa/kernel/git/mm/migrate.c:1012:
/home/hpa/kernel/git/arch/x86/include/asm/uaccess_32.h:212: error:
    call to ‘copy_from_user_overflow’ declared

Make the logic more explicit and therefore easier for gcc to
understand.

v2: rewrite the loop entirely using a more normal structure for a
    chunked-data loop (Linus Torvalds)

Reported-by: Len Brown <lenb@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-and-Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Arjan van de Ven <arjan@linux.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-21 08:57:08 -08:00
Linus Torvalds
aea187c46f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  CacheFiles: Fix a race in cachefiles_delete_object() vs rename
  vfs: don't call ima_file_check() unconditionally in nfsd_open()
  fs: inode - remove 8 bytes of padding on 64bits allowing 1 more objects/slab under slub
  Switch proc/self to nd_set_link()
  fix LOOKUP_FOLLOW on automount "symlinks"
2010-02-20 16:58:03 -08:00
Linus Torvalds
d0708b9739 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB: bttv: Move I2C IR initialization
  V4L/DVB: Video : pwc : Fix regression in pwc_set_shutter_speed caused by bad 	constant => sizeof conversion.
  soc-camera: mt9t112: modify exiting conditions from standby mode
  V4L/DVB: cxusb: Select all required frontend and tuner modules
  V4L/DVB: dvb: l64781.ko broken with gcc 4.5
2010-02-20 16:56:09 -08:00
Linus Torvalds
c52042ba5c Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: Remove DEBUG_FS dependency for mux name checking
2010-02-20 16:55:41 -08:00
Linus Torvalds
cf7ad04300 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: allow alignment fault mode to be configured at kernel boot
  ARM: Update mach-types
  ARM: 5951/1: ARM: fix documentation of the PrimeCell bus
  ARM: 5950/1: ARM: Fix build error for arm1026ej-s processor
  MAINTAINERS: fix my e-mail and status for Gemini and FA526
  Gemini: wrong registers used to set reg_level in gpio_set_irq_type()
  ARM: 5944/1: scsi: fix timer setup in fas216.c
  ARM: 5938/1: ARM: L2: export outer_cache_fns
2010-02-20 16:55:05 -08:00
Russell King
d944d549aa ARM: allow alignment fault mode to be configured at kernel boot
Some glibc versions intentionally create lots of alignment faults in
their gconv code, which if not fixed up, results in segfaults during
boot.  This can prevent systems booting properly.

There is no clear hard-configurable default for this; the desired
default depends on the nature of the userspace which is going to be
booted.

So, provide a way for the alignment fault handler to be configured via
the kernel command line.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 16:20:49 +00:00