Commit Graph

191349 Commits

Author SHA1 Message Date
Bjørn Mork
d6bc0149d8 ipv6: udp: make short packet logging consistent with ipv4
Adding addresses and ports to the short packet log message,
like ipv4/udp.c does it, makes these messages a lot more useful:

[  822.182450] UDPv6: short packet: From [2001:db8:ffb4:3::1]:47839 23715/178 to [2001:db8:ffb4:3:5054:ff:feff:200]:1234

This requires us to drop logging in case pskb_may_pull() fails,
which also is consistent with ipv4/udp.c

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 21:50:17 -07:00
Tobias Klauser
575400bf5d net: emaclite: Use resource_size
Use the resource_size function instead of manually calculating the
resource size.  This reduces the chance of introducing off-by-one
errors.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 01:31:29 -07:00
Bruce Allan
627c8a041f e1000e: Reset 82577/82578 PHY before first PHY register read
Reset the PHY before first accessing it.  Doing so, ensure that the PHY is
in a known good state before we read/write PHY registers. This fixes a
driver probe failure.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 01:31:28 -07:00
Bruce Allan
6dfaa76994 e1000e: reset MAC-PHY interconnect on 82577/82578 during Sx->S0
During Sx->S0 transitions, the interconnect between the MAC and PHY on
82577/82578 can remain in SMBus mode instead of transitioning to the
PCIe-like mode required during normal operation.  Toggling the LANPHYPC
Value bit essentially resets the interconnect forcing it to the correct
mode.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 01:31:28 -07:00
David S. Miller
ffb273623b netpoll: Use 'bool' for netpoll_rx() return type.
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 01:31:27 -07:00
WANG Cong
f6dc31a85c bonding: make bonding support netpoll
Based on Andy's work, but I modified a lot.

Similar to the patch for bridge, this patch does:

1) implement the 2 methods to support netpoll for bonding;

2) modify netpoll during forwarding packets via bonding;

3) disable netpoll support of bonding when a netpoll-unabled device
   is added to bonding;

4) enable netpoll support when all underlying devices support netpoll.

Cc: Andy Gospodarek <gospo@redhat.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 00:48:51 -07:00
WANG Cong
c06ee961d3 bridge: make bridge support netpoll
Based on the previous patch, make bridge support netpoll by:

1) implement the 2 methods to support netpoll for bridge;

2) modify netpoll during forwarding packets via bridge;

3) disable netpoll support of bridge when a netpoll-unabled device
   is added to bridge;

4) enable netpoll support when all underlying devices support netpoll.

Cc: David Miller <davem@davemloft.net>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 00:48:24 -07:00
WANG Cong
0e34e93177 netpoll: add generic support for bridge and bonding devices
This whole patchset is for adding netpoll support to bridge and bonding
devices. I already tested it for bridge, bonding, bridge over bonding,
and bonding over bridge. It looks fine now.

To make bridge and bonding support netpoll, we need to adjust
some netpoll generic code. This patch does the following things:

1) introduce two new priv_flags for struct net_device:
   IFF_IN_NETPOLL which identifies we are processing a netpoll;
   IFF_DISABLE_NETPOLL is used to disable netpoll support for a device
   at run-time;

2) introduce one new method for netdev_ops:
   ->ndo_netpoll_cleanup() is used to clean up netpoll when a device is
     removed.

3) introduce netpoll_poll_dev() which takes a struct net_device * parameter;
   export netpoll_send_skb() and netpoll_poll_dev() which will be used later;

4) hide a pointer to struct netpoll in struct netpoll_info, ditto.

5) introduce ->real_dev for struct netpoll.

6) introduce a new status NETDEV_BONDING_DESLAE, which is used to disable
   netconsole before releasing a slave, to avoid deadlocks.

Cc: David Miller <davem@davemloft.net>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 00:47:21 -07:00
Greg Rose
08259594e0 ixgbevf: Cache PF ack bit in interrupt
When the PF acks a message from the VF the VF gets an interrupt.  It
must cache the ack bit so that polling SW will not miss the ack.  Also
avoid reading the message buffer on acks because that also will clear
the ack bit.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 00:31:45 -07:00
Greg Rose
8a07a22d85 ixgbe: Streamline MC filter setup for VFs
The driver was calling the set Rx mode function for every multicast
filter set by the VF.  When starting many VMs where each might have
multiple VLAN interfaces this would result in the function being
called hundreds or even thousands of times.  This is unnecessary
for the case of the imperfect filters used in the MTA and has been
streamlined to be more efficient.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 00:31:44 -07:00
Greg Rose
73422913ca ixgbe: Remove unneeded register writes in VF VLAN setup
The driver is unnecessarily writing values to VLAN control registers.
These writes already done elsewhere and are superfluous here.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 00:31:43 -07:00
David S. Miller
58544feb67 Merge branch 'vhost' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 2010-05-06 00:26:49 -07:00
Nick Nunley
2873957df0 igb: reduce cache misses on tx cleanup
This patch reduces the number of skb cache misses in the
clean_tx_irq path, and results in an overall increase
in tx packet throughput.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:30:12 -07:00
Sebastien Jan
a84afa40e0 ks8851: companion eeprom access through ethtool
Accessing ks8851 companion eeprom permits modifying the ks8851 stored
MAC address.

Example how to change the MAC address using ethtool, to set the
01:23:45:67:89:AB MAC address:
$ echo "0:AB8976452301" | xxd -r > mac.bin
$ sudo ethtool -E eth0 magic 0x8870 offset 2 < mac.bin

Signed-off-by: Sebastien Jan <s-jan@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:27:45 -07:00
Sebastien Jan
a4bdfff744 ks8851: Low level functions for read/write to companion eeprom
Low-level functions provide 16bits words read and write capability
to ks8851 companion eeprom.

Signed-off-by: Sebastien Jan <s-jan@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:27:44 -07:00
Sebastien Jan
7d9974666e ks8851: Add caching of CCR register
CCR register contains information on companion eeprom availability.

Signed-off-by: Sebastien Jan <s-jan@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:27:44 -07:00
Tom Herbert
d951f72503 forcedeth: Account for consumed budget in napi poll
Repeated calls to nv_rx_process in napi poll routine do not take
portion of budget that has been consumed in previous calls.  Fix by
subtracting the number of packets processed.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:24:17 -07:00
David Daney
0294b6f78f netdev: octeon_mgmt: Remove some gratuitous blank lines.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:35 -07:00
David Daney
4e4a4f1478 netdev: octeon_mgmt: Try not to drop TX packets when stopping the queue.
Stop the queue when we add the packet that will fill it instead of dropping the packet

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:35 -07:00
David Daney
b635e06993 netdev: octeon_mgmt: Free TX skbufs in a timely manner.
We also reduce the high water mark to 1 so skbufs are not stranded for
long periods of time.  Since we are cleaning after each packet, no
need to do it in the transmit path.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:34 -07:00
David Daney
a0cfa850ac netdev: octeon_mgmt: Fix race manipulating irq bits.
Don't re-read the interrupt status register, clear the exact bits we
will be testing.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:34 -07:00
David Daney
4d30b8013b netdev: octeon_mgmt: Fix race condition freeing TX buffers.
Under heavy load the TX cleanup tasklet and xmit threads would race
and try to free too many buffers.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:33 -07:00
David Daney
62538d2490 netdev: octeon_mgmt: Use proper MAC addresses.
The original implementation incorrectly uses netdev->dev_addrs.

Use netdev->uc instead.  Also use netdev_for_each_uc_addr to iterate
over the addresses.  Fix comment.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:33 -07:00
Greg Rose
7f01648aa3 ixgbe: Add support for VF MAC and VLAN configuration
Add support for the "ip link set" and "ip link show" commands that allow
configuration of the virtual functions' MAC and port VLAN via user space
command line.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:15:33 -07:00
Greg Rose
f04127760e ixgbe: Add boolean parameter to ixgbe_set_vmolr
Add a boolean parameter to ixgbe-set_vmolr so that the caller can
specify whether the pool should accept untagged packets.  Required
for a follow on patch to enable administrative configuration of port
VLAN for virtual functions.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:15:32 -07:00
Jesse Brandeburg
eab2abf582 e1000/e1000e: implement a simple interrupt moderation
Back before e1000-7.3.20, the e1000 driver had a simple algorithm that
managed interrupt moderation.  The driver was updated in 7.3.20 to
have the new "adaptive" interrupt moderation but we have customer
requests to redeploy the old way as an option.  This patch adds the
old functionality back.  The new functionality can be enabled via
module parameter or at runtime via ethtool.
Module parameter: (InterruptThrottleRate=4) to use this new
moderation method.
Ethtool method: ethtool -C ethX rx-usecs 4

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:15:32 -07:00
Alexander Duyck
edf15c1742 e1000e: increase rx fifo size to 36K on 82574 and 82583
This change increases the RX fifo size to 36K for standard frames and
decreases the TX fifo size to 4K.  The reason for this change is that on
slower systems the RX is much more likely to backfill and need space than
the TX is.  As long as the TX fifo is twice the size of the MTU we should
have more than enough TX fifo.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:15:31 -07:00
Tom Herbert
f85e4dfac6 e1000e: Save irq into netdev structure
Set net->devirq to pdev->irq.  This should be consistent with other
drivers.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:11:26 -07:00
Tom Herbert
c72ea83d39 e1000e: Remove unnessary log message
Remove e_info message printed whenever TSO is enabled or disabled.
This is not very useful and just clutters dmesg.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:11:26 -07:00
Tom Herbert
50849d792b e1000e: reduce writes of RX producer ptr
Reduce number of writes to RX producer pointer.   When alloc'ing RX
buffers, only write the RX producer pointer once every
E1000_RX_BUFFER_WRITE (16) buffers created.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:11:25 -07:00
Tom Herbert
9ed318d546 e1000e: save skb counts in TX to avoid cache misses
In e1000_tx_map, precompute number of segements and bytecounts which
are derived from fields in skb; these are stored in buffer_info.  When
cleaning tx in e1000_clean_tx_irq use the values in the associated
buffer_info for statistics counting, this eliminates cache misses
on skb fields.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:11:25 -07:00
Tom Herbert
4447957a82 bnx2x: Fix check to get RX hash
Flag used in check to get rxhash out of the descriptor is incorrect one.
Fix to use the proper features flag.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:09:27 -07:00
David S. Miller
2861a185e3 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2010-05-05 15:09:05 -07:00
John W. Linville
83163244f8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	drivers/net/wireless/libertas_tf/cmd.c
	drivers/net/wireless/libertas_tf/main.c
2010-05-05 16:14:16 -04:00
Johannes Berg
adfba3c7c0 mac80211: use fixed channel in ibss join when appropriate
"mac80211: improve IBSS scanning" was missing a hunk.
This adds that hunk as originally intended.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 15:10:57 -04:00
John W. Linville
f2c98382fe rtl8187: use SET_IEEE80211_PERM_ADDR
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
2010-05-05 14:46:24 -04:00
Eric Dumazet
ec7d2f2cf3 net: __alloc_skb() speedup
With following patch I can reach maximum rate of my pktgen+udpsink
simulator :
- 'old' machine : dual quad core E5450  @3.00GHz
- 64 UDP rx flows (only differ by destination port)
- RPS enabled, NIC interrupts serviced on cpu0
- rps dispatched on 7 other cores. (~130.000 IPI per second)
- SLAB allocator (faster than SLUB in this workload)
- tg3 NIC
- 1.080.000 pps without a single drop at NIC level.

Idea is to add two prefetchw() calls in __alloc_skb(), one to prefetch
first sk_buff cache line, the second to prefetch the shinfo part.

Also using one memset() to initialize all skb_shared_info fields instead
of one by one to reduce number of instructions, using long word moves.

All skb_shared_info fields before 'dataref' are cleared in 
__alloc_skb().

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 01:07:37 -07:00
Jiri Pirko
8753d29fd5 pppoe: remove unnecessary checks in pppoe_flush_dev
pernet memory is guaranteed to exist when notifiers are called.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 00:56:33 -07:00
John W. Linville
c693bf90cf rtl8180: use SET_IEEE80211_PERM_ADDR
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04 15:46:15 -04:00
Gertjan van Wingerde
df624ca541 rt2x00: Register frame length in TX entry descriptor instead of L2PAD.
And use it consistently in the chipset drivers.
Preparation for further clean ups.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04 13:24:23 -04:00
Gertjan van Wingerde
a21ee72403 rt2x00: Fix HT40+/HT40- setting in rt2800.
Inspection of the Ralink vendor driver shows that the TX_BAND_CFG register
and BBP register 3 are about HT40- indication, not about HT40+ indication.
Inverse the meaning of these fields in the code.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04 13:24:23 -04:00
Gertjan van Wingerde
79a854f1e1 rt2x00: Enable RT30xx by default.
Now that RT30xx support is at the same level as RT28xx support we can enable
these devices by default.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04 13:24:23 -04:00
Gertjan van Wingerde
c2661486eb rt2x00: Remove rt2x00pci.h include from rt2800lib.
PCI specific code has been remove quite some time ago.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04 13:24:22 -04:00
Reinette Chatre
3d79b2a9ee iwlwifi: recalculate average tpt if not current
We currently have this check as a BUG_ON, which is being hit by people.
Previously it was an error with a recalculation if not current, return that
code.

The BUG_ON was introduced by:
commit 3110bef78c
Author: Guy Cohen <guy.cohen@intel.com>
Date:   Tue Sep 9 10:54:54 2008 +0800

    iwlwifi: Added support for 3 antennas

... the portion adding the BUG_ON is reverted since we are encountering the error
and BUG_ON was created with assumption that error is not encountered.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04 13:24:22 -04:00
David S. Miller
0a12761bcd forcedeth: Kill NAPI config options.
All distributions enable it, therefore no significant body of users
are even testing the driver with it disabled.  And making NAPI
configurable is heavily discouraged anyways.

I left the MSI-X interrupt enabling thing in an "#if 0" block
so hopefully someone can debug that and it can get re-enabled.
Probably it was just one of the NVIDIA chipset MSI erratas that
we work handle these days in the PCI quirks (see drivers/pci/quirks.c
and stuff like nvenet_msi_disable()).

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 23:33:05 -07:00
Tom Herbert
53f224cc5f forcedeth: GRO support
Add GRO support to forcedeth.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 23:24:19 -07:00
Eric Dumazet
93bb64eac1 net: skb_free_datagram_locked() fix
Commit 4b0b72f7dd ( net: speedup udp receive path )
introduced a bug in skb_free_datagram_locked().

We should not skb_orphan() skb if we dont have the guarantee we are the
last skb user, this might happen with MSG_PEEK concurrent users.

To keep socket locked for the smallest period of time, we split
consume_skb() logic, inlined in skb_free_datagram_locked()

Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 23:18:14 -07:00
David S. Miller
f546061840 Merge branch 'net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vxy/lksctp-dev
Add missing linux/vmalloc.h include to net/sctp/probe.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 16:24:31 -07:00
Eric Dumazet
4f70ecca9c net: rcu fixes
Add hlist_for_each_entry_rcu_bh() and
hlist_for_each_entry_continue_rcu_bh() macros, and use them in
ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps
warnings.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 15:53:54 -07:00
David S. Miller
52a60ed2da phy/micrel: Add module device ID table for autoloading.
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 15:48:29 -07:00