Commit Graph

190820 Commits

Author SHA1 Message Date
Paul Walmsley
d74b494971 OMAP2+ clock: remove DEFAULT_RATE clksel_rate flag
The DEFAULT_RATE clksel_rate flag is essentially useless.  It was set
on some of the lowest divisors, which, when switching to a much
higher-rate parent, could have potentially resulted in rates that
exceeded the hardware specifications for downstream clocks in the
window between the clk_set_parent(), and a subsequent clk_set_rate().
It seems much safer to just remove the flag and always use the highest
available divisor (resulting in the lowest possible rate) after the
switch, and this patch does so.

Ideally, it would be best to first attempt to switch to a divisor that
matches the clock's rate with the previous parent, if at all possible.
But that is a project for some other day or some other person.  The
parent changing code is rarely used.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20 12:31:06 -06:00
Paul Walmsley
275f675c24 OMAP3: PM: PM_MPUGRPSEL writes should use GRPSEL macros, not EN macros
Writes to the PM_*GRPSEL registers should use _GRPSEL_ macros, not _EN_ macros,
to match the TRM and guard against inadvertent error.  This patch should
not cause any functional change.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Jouni Högander <jouni.hogander@nokia.com>
2010-05-20 12:31:05 -06:00
Paul Walmsley
2fd0f75cb3 OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes
Fix all of the remaining PRCM register shift/bitmask macros that did not
use the _SHIFT/_MASK suffixes to use them.  This makes the use of these
macros consistent.  It is intended to reduce error, as code can be inspected
visually by reviewers to ensure that bitshifts and bitmasks are used in
the appropriate places.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-20 12:31:05 -06:00
Paul Walmsley
2bc4ef71c5 OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes
Fix all of the remaining OMAP3 PRCM register shift/bitmask macros that
did not use the _SHIFT/_MASK suffixes to use them.  This makes the use
of these macros consistent.  It is intended to reduce error, as code
can be inspected visually by reviewers to ensure that bitshifts and
bitmasks are used in the appropriate places.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-20 12:31:05 -06:00
Paul Walmsley
f38ca10a79 OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes
Fix all of the remaining OMAP2 PRCM register shift/bitmask macros that
did not use the _SHIFT/_MASK suffixes to use them.  This makes the use
of these macros consistent.  It is intended to reduce error, as code
can be inspected visually by reviewers to ensure that bitshifts and
bitmasks are used in the appropriate places.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-20 12:31:04 -06:00
Felipe Balbi
5838bb6749 OMAP1 clock: fix section mismatch on clk_init
remove the section annotation from omap1_clk_disable_unused()
to kill the section mismatch warning.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20 12:31:04 -06:00
stanley.miao
b91da66947 AM3517: rename the i2c boardinfo to make it more readable
There are three i2c buses on am3517, and each i2c bus has several devices
on it, so we can't name the i2c boardinfo structures with one of these
devices. In order to make it more readable, now rename these three boardinfo
structures based on i2c indexes.

Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Acked-By: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:18:29 -07:00
Charulatha V
9f09686864 omap: GPIO: Fix OMAP4 GPIO reg access issues
Access to some of the OMAP4 GPIO registers are not properly handled.
This patch fixes it.

This patch is tested on 3430SDP and 4430SDP boards

Signed-off-by: Charulatha V <charu@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00
Santosh Shilimkar
fbc9be106e omap4: Move SOC specific code from board file
This patch moves OMAP4 soc specific code from 4430sdp board file.
The change is necessary so that newer board support can be added
with minimal changes. This will be also problematic for
multi-board, multi-omap builds.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00
Abraham Arce
2e5f51a539 OMAP4: Networking: Defconfig Support
Enable KS8851 SPI support +

 Networking Support
  - Packet Socket
  - TCP/IP

 Network Filesystems
  - NFS Client
  - Root Filesystem on NFS

Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00
Abraham Arce
b2aa5e5757 OMAP4: Ethernet: KS8851 Board Support
Enable Micrel KS8851 SPI network chip for OMAP4430

Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00
Syed Rafiuddin
8ebeb545a8 OMAP4: SPI: Fix Driver Kconfig
Change dependency to ARCH_OMAP2PLUS to allow systems based on
omap24xx, omap34xx or omap44xx

Cc: spi-devel-general@lists.sourceforge.net
Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00
stanley.miao
03e7e170d6 omap: hsmmc: fix the hsmmc driver for am3517
AM3517 don't have the register OMAP343X_CONTROL_PBIAS_LITE and the regulators
like "vmmc", so we set a noop "set_power" function for it.

Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00
stanley.miao
ed8303fc11 omap: init the gpio pinmux for mmc
There is two gpio for mmc use, one is for card detecting, another is
used for checking write protect. Intialize its pinmux in case the bootloader
doesn't set it.

Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00
manjugk manjugk
ea221a6ae7 omap: DMA: Fix multi-line comments
Multi line comments are fixed as per CodingStyle
guidelines.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Manjunatha GK <manjugk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:16:39 -07:00
Mika Westerberg
ada8d4a5e2 OMAP2/3/4: DMA: disable channel interrupts in omap_init_dma()
If we are softbooting another kernel using kexec, DMA controller state is not
known when we are performing omap_init_dma(). It is possible that some DMA
channels are already active. For example after kexec we get:

<4>IRQ 0020 for non-allocated DMAchannel 5
<4>IRQ 0020 for non-allocated DMAchannel 5
<4>IRQ 0020 for non-allocated DMAchannel 5
<4>IRQ 0020 for non-allocated DMAchannel 5
<4>IRQ 0020 for non-allocated DMAchannel 5

To prevent any weird things happening, we disable all channel interrupts during
init.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:16:39 -07:00
Tony Lindgren
ad57c39482 Merge branch 'v2.6.34-rc7.iommu' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus 2010-05-20 11:14:28 -07:00
Roger Quadros
0581b52e89 OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
The SDI Display subsystem needs access to the vdds_sdi supply
regulator. This is TWL4030's VAUX1 supply on RX-51.

Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-05-20 11:13:24 -07:00
Tony Lindgren
5a5f561e40 Merge branch 'pm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-05-20 11:11:44 -07:00
Tony Lindgren
935d918046 Merge branch 'gpio-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-05-20 11:07:34 -07:00
Tony Lindgren
df760137ad Merge branch 'omap-boards' into omap-for-linus 2010-05-20 11:07:23 -07:00
Janusz Krzysztofik
754b8e6534 OMAP1: Amstrad Delta: modify defconfig for external keyboardsupport
The patch adds a CONFIG directive required for supporting the Amstrad Delta
connected external keyboard by default.

Created and tested against linux-omap master,
commit 104a77440f05430f29f9d3f4ecb88c1536819585 dated 2010-04-27.

Works on top of PATCH v4 4/5(7), "input: serio: add support for Amstrad Delta
serial keyboard port".

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:02:43 -07:00
Ajay Kumar Gupta
de997718b6 AM35x: fix UI card EHCI port and LCD dependency
EHCI port on UI card and LCD share two pins (GPIO 181 and 182) thus
they have to be mutually exclusive.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Jarkko Nikula
4cfcaef11f omap: rx51: Add supplies for the tlv320aic3x codec driver
Upcoming change to tlv320aic3x codec driver require four supplies.
Implement this by connecting analogic supplies to TWL4030 VMMC2 and digital
supplies to TWL4030 VIO.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Jarkko Nikula
dabe929b59 omap: rx51: Add i2c2 board_info with tlv320aic3x
This makes possible to probe the audio codec and add another i2c2
components in the future.

Fix also indentation for the first omap_register_i2c_bus.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Jarkko Nikula
f2add1de55 omap: rx51: Change the TWL4030 VMMC2 voltage constraints andsupply name
I believe the VMMC2 constraints must be the same than with VAUX3. Older
boards are using TWL4030 VMMC2 supply for internal MMC whereas newer are
using VAUX3 that has more limited constraints defined in this same file.

More over, the VMMC2 supply is used also for analog audio domain and the
miminum analog voltage of the TLV320AIC34 codec is 2.7 V.

To combine these two facts, the patch changes supply name to V28_A as the
newer boards register VMMC2_30 for VAUX3 and uses the same constraints than
VAUX3 since those constraints are ok for the TLV320AIC34.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Steve Sakoman
5c9a29ede2 omap: Overo: Add support for second ethernet port
Some Overo add-on boards include a second ethernet port.  This patch
adds support for that second port.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Sriram
38e473a84e AM3517: defconfig update to enable EMAC support
Update the default configuration for AM3517EVM to enable
support for EMAC peripheral.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Sriram
b98dd73c6c OMAP3: clock data: Update name string for EMAC clocks
The emac driver currently uses Davinci clock names for the module and phy
clocks. Updated the omap3xxx_clks table to match the names
used by the Davinci emac driver.

Note that eventually the EMAC clocks should be renamed to be generic.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
[tony@atomide.com: updated patch description to match the patch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Sriram
56881d28b2 AM35xx: Platform specific hookup for EMAC module
Modified AM35xx EVM init sequence to handle EMAC
initialization.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Sriram
39e799df2f AM35xx EMAC: define submodule offsets
Define offsets for EMAC sub modules.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:55 -07:00
Sriram
e72b9b8072 can: ti_hecc: Enable CAN support on AM3517
Modify the default kernel configuration on AM3517 to enable CAN.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:53:46 -07:00
Sriram
917336318e can: ti_hecc: board specific hookup on AM3517EVM
Add board specific hookup for TI HECC driver on
AM3517 EVM

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Thomas Weber
a29b8204d2 omap: Devkit8000: Update default configuration
This patch updates the new default configuration for the Devkit8000.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Thomas Weber
018e075c19 omap: Devkit8000: Add mux initialization
Initialize multiplexed pins with correct mode.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Viral Mehta
4ab866d11a omap2: select ARCH_OMAP_OTG for OMAP2430 SDP
Configuration for OMAP2430 should select ARCH_OMAP_OTG just like
it is done for OMAP2420

Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Viral Mehta
9c68eb8197 omap2: Add OHCI USB platform init for 2430 SDP
Add platform init code for OHCI USB on OMAP2430 SDP

Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com>
[tony@atomide.com: Updated subject to mention the board name]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Viral Mehta
39ecc703d1 omap2: Add I2C bus 1 initialisation for 2430sdp
Initialize isp1301 FS USB transceiver and
add I2C bus1 initialization code for OMAP2430 SDP

Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Janusz Krzysztofik
d22ae836d6 omap1: amsdelta: defconfig updates
The patch provides the following ams_delta_defconfig updates:
- explicitly select preemptable RCU,
- replace outdated CONFIG_LBD and CONFIG_LSF options with CONFIG_LBDAF,
- activate support for LCD contrast setting (new in 2.6.34),
- turn off verbose bug reporting for smaller kernel.

Created and tested against linux-2.6.34-rc3.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Hiroshi DOYU
4abb761749 omap iommu: Reject unaligned addresses at setting page table entry
This rejects unaligned device virtual address('da') and physical
address('pa') and informs error to caller when a page table entry is
set. Otherwise, a wrong address can be used by IO device.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Hari Kanigeri <h-kanigeri2@ti.com>
2010-05-14 10:23:39 +03:00
Hiroshi DOYU
e0a42e4fcb omap iommu: Exit iteration if no possibility of available area
Searching avaialable spaces should be stopped as soon as it turns out
that there's no possibility with the rest of it.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14 10:23:37 +03:00
Hiroshi DOYU
fa460b88e0 omap iommu: Insert a gap page between IOVMAs against override
Inserting a gap page between IOVMAs could detect an override on other
IOVMA with iommu fault. This was originally suggested by Sakari Ailus
and based on the work and comment by David Cohen.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: David Cohen <david.cohen@nokia.com>
Cc: Sakari Ailus <Sakari.Ailus@nokia.com>
2010-05-14 10:23:36 +03:00
Hiroshi DOYU
347815fcc6 omap iommu: Make CONFIG_OMAP_IOMMU_DEBUG selectable
This CONFIG_OMAP_IOMMU_DEBUG option cannot be selected because it's
not visible on menu. Make this option selectable.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2010-05-14 10:23:34 +03:00
Hiroshi DOYU
37c2836c45 omap iommu: Introduce iteration macro for iotlb entry scan
There are some places to scan iotlb entries. This iteration macro
could make these code a bit simpler with proceeding iotlb entries
transparently.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Tested-by: Hari Kanigeri <h-kanigeri2@ti.com>
2010-05-14 10:23:33 +03:00
Kanigeri, Hari
be6d8026a2 omap iommu: add TLB preservation support
This patch adds TLB preservation support to IOMMU module

Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14 10:23:31 +03:00
Kanigeri, Hari
77bc5abb70 omap iommu: missing check for TLB valid entry
Added the missing TLB valid entry setting for cam register

Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14 10:23:30 +03:00
Kanigeri, Hari
f779f9235f omap iommu: support for OMAP4
This patch provides the iommu support for OMAP4 co-processors.

Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14 10:23:28 +03:00
Kanigeri, Hari
44da397fad omap iommu: renamed omap3-iommu to omap-iommu
This patch includes changes to omap3-iommu.c file to make it generic
for all OMAPs. Renamed omap3-iommu.c to omap-iommu.c

[Hiroshi DOYU: Remove unnecessary "iommu-y" in Makefile]

Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14 10:23:19 +03:00
Kevin Hilman
d009559a42 OMAP: GPIO: remove duplicate debugfs interface
The generic gpiolib provides a debugfs interface to GPIOs which
provides identical (but nicer looking) data as the OMAP specific one.

This patch completely drops the OMAP specific interface
(/debug/omap_gpio) in favor of using the generic one (/debug/gpio.)

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12 09:39:17 -07:00
Tero Kristo
c872670799 OMAP3: GPIO: Removed a couple of unneeded registers from context save/restore
setwkuena and setdataout are covered already by wake_en and dataout fields.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12 09:39:17 -07:00