Commit Graph

162669 Commits

Author SHA1 Message Date
Graf Yang
e78feaaeeb Blackfin: swap clocksource ratings for gptimer/cycles
The cycles clocksource is a higher resolution than the gptimer one, so
make sure the ratings field reflects this.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:48 -04:00
Mike Frysinger
3289651a97 Blackfin: update ftrace_push_return_trace() breakage
Commit 71e308a239 updated ftrace_push_return_trace() prototype but didn't
update the Blackfin ftrace code, so things broke.  Since we don't support
the new stuff yet, call it with stub values.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:47 -04:00
Harald Krapfenbauer
9c21453e37 Blackfin: update cm board resources
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:46 -04:00
Harald Krapfenbauer
6058434468 Blackfin: cm-bf537u: split board from cm-bf537e
The cm-bf537u module, while similar to the cm-bf537e, is different enough
to warrant its own resources.  It has a USB controller but no PHY.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:45 -04:00
Barry Song
769cfc0d08 Blackfin: bf538-ezkit: add SPI IRQ resources
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:43 -04:00
Sonic Zhang
88c28b2df9 Blackfin: increase default async timings for parallel flashes
The default async timings are a little too fast for the parallel flash
that is attached by default to the async banks.  So slow things down a bit
so accessing the hardware is stable.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:42 -04:00
Bernd Schmidt
4663f6ef25 Blackfin: add ICPLB coverage for async banks
When doing XIP, we need to execute out of the async banks, so we need
ICPLBs to allow this.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:42 -04:00
Mingquan Pan
4a3e53c1c4 Blackfin: use KERN_ALERT in all kgdb_test output
Most messages are already using KERN_ALERT, so be consistent to make
things easier to check with test scripts.

Signed-off-by: Mingquan Pan <grace.pan@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:40 -04:00
Yi Li
4e4d496ee3 Blackfin: fix BF54x SPI CS resources
The BF54x has three slave select signals for SPI0/SPI1, not eight.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:39 -04:00
Robin Getz
774b80229f Blackfin: fix typo in isram_write()
The DTEST write bit is 2, not 1.  Improve comments in the related macro
while we're here.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:38 -04:00
Michael Hennerich
ba877d4491 Blackfin: bf537-stamp: add adp5588 gpio resources
For the adp5588 GPIO daughter card.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:37 -04:00
Mike Frysinger
c40cdb2cbd Blackfin: add some isram-driver self tests
Make it easy to figure out if code changes here are correct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:36 -04:00
Robin Getz
dedfd5d7f2 Blackfin: workaround anomaly 05000283
Make sure our interrupt entry code with exact hardware errors handles
anomaly 05000283 (infinite stall in system MMR kill) so we don't stall
while under load.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:34 -04:00
Michael Hennerich
05d17dfaab Blackfin: fix spelling in a few comments
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:33 -04:00
Yi Li
b6dbde27dd Blackfin: use raw_smp_processor_id() in exception code
When preempt debugging is enabled, smp_processor_id() may utilize the
"current" structure.  This may not be safe to access under all exceptions
due to it being in dynamically allocated memory.  So in exception code,
make sure we use raw_smp_processor_id() instead to get at the real value
directly.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:32 -04:00
Michael Hennerich
00dd66d012 Blackfin: remove useless duplicated assignment in gpio code
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:31 -04:00
Ingo Molnar
8d7ac69ffa Blackfin: Fix link errors with binutils 2.19 and GCC 4.3
Not sure whether this has been reported/fixed before.

Today I built a Blackfin tool-chain from scratch for -tip testing,
and it triggers:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.data_a_l1' referenced in expression

and:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.text_data_l1'
referenced in expression

Now i dont have any way to test this linker script, but it now at
least builds fine after fixing what appears to be typos in those
assert statements.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:30 -04:00
Graf Yang
1794131471 Blackfin: handle the core timer interrupt with handle_percpu_irq on SMP
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:29 -04:00
Mike Frysinger
926494943b Blackfin: optimize fixed code handling for the most common case
The majority of the time we are returning to user space, it is not in the
fixed atomic code region.  So rather than branch to a function where we
check the PC and return, do the check inline and branch only when needed.

Also, tweak some of the fixed code handling based on assumptions we are
aware of but cannot be expressed in C.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:28 -04:00
Barry Song
dac981740f Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name
The ASoC drivers have dropped the redundant "-spi" suffix in the driver
name, so update the board resources accordingly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:27 -04:00
Mike Frysinger
3aa670419a Blackfin: punt dead cache locking code
No one uses these functions, and some are duplicate of existing C code.  So
just punt the whole thing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:25 -04:00
Mike Frysinger
0198b3bcae Blackfin: drop board resources for dead devices (pbx/ad9960)
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:24 -04:00
Yi Li
c4baebf268 Blackfin: do not trace the exception handler
Since the exception handler cannot cause exceptions, we cannot trace it
without easily causing double faults and crashing the system.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:23 -04:00
Mike Frysinger
7b06263bd7 Blackfin: fix BF522/BF523 max VCO mixup
The BF522 and BF523 had their real max VCO values swapped.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:22 -04:00
Graf Yang
ad46163ac2 Blackfin: SMP port does not yet support cpu frequency scaling
We have an item to get this fixed, but in the mean time, disable selection
via Kconfig dependencies.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:21 -04:00
Yi Li
eb7bd9c461 Blackfin: cleanup sync handling when enabling/disabling cplbs
The handling of updating the [DI]MEM_CONTROL MMRs does not follow proper
sync procedures as laid out in the Blackfin programming manual.  So rather
than audit/fix every call location, create helper functions that do the
right things in order to safely update these MMRs.  Then convert all call
sites to use these new helper functions.

While we're fixing the code, drop the workaround for anomaly 05000125 as
that anomaly applies to old versions of silicon that we do not support.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:19 -04:00
Barry Song
8312440e05 Blackfin: bf537-stamp: update ad1836 resources
Update the ad1836 resources for the new ASoC driver.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:18 -04:00
Yi Li
bd411b15cc Blackfin: update anomaly lists
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:16 -04:00
Barry Song
f1cb64625c Blackfin: bf538-ezkit: add resources for parallel flash
The board has some parallel flash hooked up to the async banks, so add
appropriate physmap resources for it.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:15 -04:00
Roel Kluin
ac860751eb Blackfin: fix read buffer overflow
Check whether index is within bounds before testing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:13 -04:00
Stefan Pledl
0e101ec12e Blackfin: bf548-ezkit: fix incorrect LCD size parameters
I think we have to use the physical dimensions [mm] of the display for
.width and .heigth in struct bfin_bf54xfb_mach_info bf54x_lq043_data which
are copied to fbinfo->var.height/.width in bf54x-lq043fb.c.

linux/fb.h describes this values as 'height/weight of picture in mm'

Otherwise QT calcs the wrong dpi value and the displayed fonts are very
small.

Signed-off-by: Stefan Pledl <stefan.pledl@mesutronic.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:12 -04:00
Barry Song
b3dec4a4ff Blackfin: cm-bf527/bf537-stamp: fix dm9000 resources
The dm9000 driver expects two IORESOURCE_MEM to get at the device, so make
sure we declare things properly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:10 -04:00
Mike Frysinger
8d71e07596 Blackfin: drop unused MMR defines that only cause bad code to be written
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:09:55 -04:00
Michael Hennerich
61f09b5a09 Blackfin: convert boards to use platform data with smc91x
Latest smc91x driver allows you to specify settings in board resources
rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:32:00 -04:00
Barry Song
2fff7f8800 Blackfin: bf537-stamp: drop ATA interrupt probe workaround
The interrupt probe workaround doesn't work without hacks to common code,
and the add-on card only needs a simple resistor to fix the problem, so
drop the board-specific hack.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:58 -04:00
Graf Yang
01b9f4b0ed Blackfin: improve double fault debug handling
Since the hardware only provides reporting for the last exception handled,
and the values are valid only when executing the exception handler, we
need to save the context for reporting at a later point.  While we do this
for one exception, it doesn't work properly when handling a second one as
the original exception is clobbered by the double fault.  So when double
fault debugging is enabled, create a dedicated shadow of these values and
save/restore out of there.  Now the crash report properly displays the
first exception as well as the second one.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:57 -04:00
Cliff Cai
858c5e9abc Blackfin: bf533-stamp: fix typo in SPI frequency for ad1836 codec
One too many zeros means we run way faster than the codec can handle.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:56 -04:00
Graf Yang
36b8412886 Blackfin: fix MPU handling of invalid memory accesses
The protect_page() function was incorrectly setting up the hardware tables
based on possible access capabilities rather than the actual requested
values.  This means we would grant more access to mmap-ed pages than we
should have.  Once we fix this, we need to tweak the signal generated by
such accesses to aline ourselves with other ports.  This allows the LTP
mmap0{5,6,7} cases to run properly.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:55 -04:00
Jean Delvare
8fc4dd9e87 Blackfin: clean up duplicate I2C device type definitions
I2C_BOARD_INFO() already sets .type, no need to set it again.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:53 -04:00
Barry Song
427f277e5f Blackfin: bf537-stamp: update AD714x resources
Push the device table to the board resources as data interpretation can be
changed on a per-board basis.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:51 -04:00
Sonic Zhang
407505dc01 Blackfin: do not try displaying the end of the stack
The end of the stack may not be valid (and that could be OK), so do not
attempt to parse it.  If we do, we might use a bad pointer in kernel space
which makes things panic().

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:50 -04:00
Yi Li
2120b68f31 Blackfin: bf533-stamp: add resources for mmc_spi card
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:49 -04:00
Barry Song
f41e2fded0 Blackfin: bf538: add bfin_clear_PPI_STATUS() helper
Add the bf538 version of bfin_clear_PPI_STATUS() to match all other ports.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:47 -04:00
Stefan Pledl
a2f78cfc65 Blackfin: fix BF548 UART0 DMA IRQ translation
The initial BF54x port included some defines to keep code simple across
different processors, but it just ended up causing the UART0 DMA IRQs to
be set to the UART1 channels.

Signed-off-by: Stefan Pledl <stefan.pledl@mesutronic.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:46 -04:00
Robin Getz
837ec2d56c Blackfin: catch hardware errors earlier during booting
Allow hardware errors to be caught during early portions of booting, and
leave something in the shadow console that people can use to debug their
system with (to be printed out by the bootloader on next reset).

This enables the hardare error interrupts in head.S, allowing us to find
hardware errors when they happen (well, as much as you can with a hardware
error) and prints out the trace if it is enabled.  This will catch errors
(like booting the wrong image on a 533) which previously resulted in a
infinite loop/hang, as well as random hardware errors before before
setup_arch().

To disable this debug only feature - turn off EARLY_PRINTK.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:44 -04:00
Robin Getz
3f871feaf3 Blackfin: add an early shadow console
Add a memory based shadow console to keep a copy of the printk buffer in a
location which can be found externally.  This allows bootloaders to locate
and utilize the log buffer in case of silent (early/resume/etc...) crashes.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:43 -04:00
Mike Frysinger
53e18df745 Blackfin: add support for common FDPIC ptrace requests
The FDPIC arches support a standard set of ptrace requests so rather than
define our own custom API, hook up those requests for common code to
leverage.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:42 -04:00
Mike Frysinger
81c969a8bc Blackfin: push SRAM locks down into related ifdefs
Rather than defining the locks and initializing them all the time, only do
so when we actually need them (i.e. the SRAM regions exist).  This avoids
dead data and code bloat during runtime.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:41 -04:00
Sonic Zhang
9c954f8941 Blackfin: unify duplicated SMP checks in L2 cache kconfig
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:59 -04:00
Michael Hennerich
204844ebd0 Blackfin: rename PCF8574 driver config
The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the
defines in the board resources accordingly.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:57 -04:00